Tag Archives: ac worm gear motor

Worm reversible induction ac motor manufacturer made in China – replacement parts – in Vale do Aco Brazil Shaft and Worm Gear Reducer Nmrv025-150 with Short Lead Time with top quality

Worm reversible induction ac motor manufacturer made in China - replacement parts - in Vale do Aco Brazil Shaft and Worm Gear Reducer Nmrv025-150 with Short Lead Time with top quality

We – EPG Group the biggest worm gearbox, couplings and gears factory in China with 5 different branches. For more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

Solution INTRODUCTION:
Primary Attributes:
one) Produced of large quality aluminum alloy, light fat and non-rusting
two) Large output torque and substantial radiating performance 3) Easy working and lower noise, can perform long time in dreadful situation
four) Good-loo ept look, durable support existence and small volume
5) Appropriate for omnibearing set up
Main Resources:
one)housing: aluminium alloy ADC12(size 571-090) die forged iron HT200(size one hundred ten-one hundred fifty)
2)Worm:20Cr, ZI Involute profile carbonize&quencher heat treatment method make equipment surface area hardness up to 56-62 HRC Right after precision grinding, carburization layer’s thickness between .3-.5mm.
three)Worm Wheel:wearable stannum alloy CuSn10-1

Solution PARAMETERS:

Dimension Specification transmission ratio
IEC N M P seven.5 10 fifteen twenty twenty five thirty forty fifty sixty eighty 100
D
25 56B14 fifty sixty five 80 9 nine nine 9 9 nine 9 9 9    
30 63B5 ninety five 115 a hundred and forty 11 11 11 11 11 11 11 11      
63B14 60 75 90
56B5 eighty a hundred 120 9 9 9 9 9 9 nine nine nine nine  
56B14 50 65 eighty 9 9 nine nine 9 nine nine nine 9 9
40 71B5 110 130 a hundred and sixty 14 14 14 14 14 14 14 14      
71B14 70 85 one zero five
63B5 95 one hundred fifteen a hundred and forty 11 11 11 11 11 11 11 11 11 11 11
63B14 sixty 75 90
56B5 80 a hundred a hundred and twenty               9 9 9 9
50 80B5 130 a hundred sixty five two hundred 19 19 19 19 19 19 19 – – – –
80B14 80 a hundred 120
71B5 one hundred ten 130 160 14 14 14 14 14 14 14 14 14 14 –
71B14 70 eighty five a hundred and five
63B5 ninety five a hundred and fifteen 140 – – – – – – – eleven eleven 11 11
63 90B5 one hundred thirty one hundred sixty five two hundred 24 24 24 24 24 24 24 – – – –
90B14 ninety five a hundred and fifteen 140
80B5 130 a hundred sixty five 200 19 19 19 19 19 19 19 19 19 19 –
80B14 eighty a hundred 120
71B5 110 130 160 – – – – – – 14 14 14 14 14
71B14 70 eighty five one zero five
75 100/112B5 a hundred and eighty 215 250 28 28 28 – – – – – – – –
a hundred/112B14 110 one hundred thirty one hundred sixty
90B5 a hundred thirty 165 two hundred 24 24 24 24 24 24 24       –
90B14 ninety five a hundred and fifteen a hundred and forty
80B5 one hundred thirty 165 two hundred       19 19 19 19 19 19 19 19
80B14 80 a hundred one hundred twenty
71B5 110 one hundred thirty one hundred sixty               14 fourteen fourteen 14
90 100/112B5 one hundred eighty 215 250 28 28 28 28 28 28 – – – – –
one hundred/112B14 110 one hundred thirty 160
90B5 one hundred thirty one hundred sixty five 200 24 24 24 24 24 24 24 24 24   –
90B14 95 one hundred fifteen a hundred and forty
80B5 one hundred thirty a hundred sixty five 200             19 19 19 19 19
80B14 80 a hundred one hundred twenty
110 132B5 230 265 300 38 38 38 38         – – –
a hundred/112B5 a hundred and eighty 215 250 28 28 28 28 28 28 28 28 28    
one hundred/112B14 110 one hundred thirty a hundred and sixty
90B5 one hundred thirty one hundred sixty five 200         24 24 24 24 24 24 24
80B5 one hundred thirty one hundred sixty five 200                   19 19
130 132B5 230 265 three hundred 38 38 38 38 38 38 38   – – –
100/112B5 a hundred and eighty 215 250         28 28 28 28 28 28 28
100/112B14 one hundred ten one hundred thirty 160
90B5 130 one hundred sixty five 200                   24 24
150 160B5 250 three hundred 350 42 42 forty two 42 forty two – – – – – –
132B5 230 265 three hundred       38 38 38 38 38 38    
100/112B5 one hundred eighty 215 250               28 28 28 28


Item Define Proportions:

Business Short INTRODUCTION:
We are a professional reducer maker situated in HangZhou, ZHangZhoug province.
Our top merchandise is  full variety of RV571-150 worm reducers , also equipped hypoid helical gearbox, Personal computer models, UDL Variators and AC Motors.
Merchandise are widely utilised for apps these kinds of as: foodstuffs, ceramics, packing, chemical compounds, pharmacy, plastics, paper-producing, development machinery, metallurgic mine, environmental protection engineering, and all types of computerized lines, and assembly lines.
With rapidly delivery, outstanding right after-income services, advanced making facility, our goods offer well  both at home and abroad. We have exported our reducers to Southeast Asia, Eastern Europe and the Middle East and so on.Our aim is to create and innovate on the basis of large quality, and generate a good reputation for reducers.

 WORKSHOP:


EXHIBITIONS:



FAQ:
one.Q:Can you make as for each consumer drawing?
   A: Of course, we offer you tailored provider for consumers appropriately. We can use customer’s nameplate for gearboxes.
2.Q:What is your conditions of payment ?
   A: 30% deposit prior to manufacturing,harmony T/T prior to shipping and delivery.
3.Q:Are you a  ept company or company?
   A:We are a manufacurer with superior equipment and skilled personnel.
4.Q:What is your generation capability?
   A:8000-9000 PCS/Month
four.Q:What is your MOQ?
   A: 1 pcs
five.Q:Cost-free sample is available or not?
   A:Yes, we can source free of charge sample if consumer agree to spend for the courier value
six.Q:Do you have any certificate?
   A:Sure, we have CE certification and SGS certification report.
Make contact with data:
Ms Lingel Pan
 
 
For any queries just come to feel totally free ton make contact with me. A lot of many thanks for your sort interest to our business!

/ The use of unique tools manufacturer’s (OEM) portion figures or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating product use and compatibility. Our firm and the detailed alternative areas contained herein are not sponsored, authorized, or created by the OEM. /

Worm reversible induction ac motor manufacturer made in China - replacement parts - in Vale do Aco Brazil Shaft and Worm Gear Reducer Nmrv025-150 with Short Lead Time with top quality

Worm reversible induction ac motor manufacturer made in China - replacement parts - in Vale do Aco Brazil Shaft and Worm Gear Reducer Nmrv025-150 with Short Lead Time with top quality

AC high speed worm gear best China in Kirov Russian Federation Tubular Motor for Roller Shutters Section Door Driver Aluminum Shutter with top quality

AC high speed worm gear best China in Kirov Russian Federation Tubular Motor for Roller Shutters Section Door Driver Aluminum Shutter with top quality

We – EPG Group the biggest gearbox & motors , couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

92mm tubular motor accessories for Roller Shutter

1. Stator size is optional
2. Safe, reliable, low noise, good starting, long life
3. Strong power
Rated voltage 5~120V/220~240V-50/60Hz
Typical used: food process,industrial equipment ,household appliances
Thermal protector with one shot fuse or multi shot fuse

Product Features 
Exquisite blue apprearance,easy installation
Smooth running, DB level is low
Standard electric limit switch with salient on the limit head
With built-in receiver, wireless control
Usage: Roller blinds, venetian blinds, Honeycomb Blinds, Pleated Blinds

  Model Torque(N.m) Rotating(RPM) Rated Voltage(v) Rated Frequency(Hz) Rated power(w) Rated Current(A) Limit Tums(tum) Protection Index(IP) Running Time(min) Net Weight(kg)
230V/50Hz SF35-3R 3 28 230 50 139 0.61 42 IP44 >4 1.7
SF35-6R 6 17 230 50 155 0.68 42 IP44 >4 1.7
SF35-10R 10 17 230 50 161 0.71 42 IP44 >4 1.7
SF35-12R 12 17 230 50 170 0.75 42 IP44 >4 1.7
110V/60Hz SF35-3R 3 33 110 60 141 1.29 42 IP44 >4 1.7
SF35-6R 6 20 110 60 154 1.41 42 IP44 >4 1.7
SF35-10R 10 20 110 60 162 1.48 42 IP44 >4 1.7
SF35-12R 12 20 110 60 173 1.58 42 IP44 >4 1.7
                       
  Model Torque(N.m) Rotating(RPM) Rated Voltage(v) Rated Frequency(Hz) Rated power(w) Rated Current(A) Limit Tums(tum) Protection Index(IP) Running Time(min) Net Weight(kg)
230V/50Hz SF45-10R 10 15 230 50 162 0.71 22 IP44 >4 2.3
SF45-20R 20 15 230 50 178 0.78 22 IP44 >4 2.5
SF45-30R 30 15 230 50 253 1.03 22 IP44 >4 3
SF45-40R 40 12 230 50 275 1.2 22 IP44 >4 3.2
SF45-50R 50 12 230 50 282 1.23 22 IP44 >4 3.4
230V/50Hz SF45-10R 10 18 110 60 166 1.51 22 IP44 >4 2.3
SF45-20R 20 18 110 60 179 1.62 22 IP44 >4 2.5
SF45-30R 30 18 110 60 244 2.23 22 IP44 >4 3
SF45-40R 40 14 110 60 280 2.55 22 IP44 >4 3.2
SF45-50R 50 14 110 60 296 2.45 22 IP44 >4 3.4

ABOUT US

Ritscher group was established in 2006.we always focus on micro-motors for household and industrial electrical appliance.Currently, we have professional micro-motor factories separatlly located in ZheJiang & ZHangZhoug province.It has 50,000 square meters plants and more than 500 employees, annual output  is 5 million pcs and has 10 million pcs annual producing capacity.After years development,we built a great reputation in the domestic and ove ept market and have the ept from our  global customers.
We  started our business from shaded pole motors, after 10 years development,our products  is enlarged to BLDC motors ,capacitor motors ,synchronous motors,stepping motors,servo motors, and PMDC motors.Our products  are widely used for ma ept refrigerators, freezers, micro-wave ovens, air warmers, air exhausters, ventilators,ovens, air filter, massage machines and many other equipments.
To design the lastest technology motors and meet our customers requirments,we have the very capable  R&D team,to ensure our products quality ,we have very strict manage system for our production department & QC department,to make our cost lower,we have the very professional purchase department, We dedicate to make every details better than we could do.
To offer quick and better service to our customers in Australia and New Zeland,we set up branch office in Australia since 2017 with exprienced consultant to support the business ,which will bring more customers to get know of us.
We will keep doing our job,move ept step by step to make our business area wider and brighter.

Our company FAQ for you

(1) Q: What kind motors you can provide?
A:For now,we mainly provide Kit ept Hood Motor,DC Motor,Gear Motor,Fan Motor Refrigerator Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor etc.

(2) Q: Is it possible to visit your factory
A: Sure. But please kindly keep us posted a few days in advance. We need to check our
schedule to see if we are available then.

(3) Q: Can I get some samples
A: It depends. If only a few samples for personal use or replacement, I am afraid it will
be difficult for us to provide, because all of our motors are custom made and no stock
available if there is no further needs. If just sample testing before the official order and
our MOQ, price and other terms are acceptable, we’d love to provide samples.

(4) Q: Is there a MOQ for your motors?
A: Yes. The MOQ is between 1000~10,000pcs for different models after sample approval.
But it’s also okay for us to accept smaller lots like a few dozens, hundreds or thousands
For the initial 3 orders after sample approval.For samples, there is no MOQ requirement. But the less the better (like no more than 5pcs) on condition that the quantity is enough in case any changes needed after initial testing.

 

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

AC high speed worm gear best China in Kirov Russian Federation Tubular Motor for Roller Shutters Section Door Driver Aluminum Shutter with top quality

AC high speed worm gear best China in Kirov Russian Federation Tubular Motor for Roller Shutters Section Door Driver Aluminum Shutter with top quality

Frequency boston worm gear reducer catalog near me China in Bamenda Cameroon Inverter 3 pH 11kw Chinese AC Drive 60Hz to 50Hz Speed Controller Motor with top quality

Frequency boston worm gear reducer catalog near me China in Bamenda Cameroon Inverter 3 pH 11kw Chinese AC Drive 60Hz to 50Hz Speed Controller Motor with top quality

We – EPG Group the biggest gearbox & motors , couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

2.1 Naming and nameplate identification
2.1.1 Naming rule
JAC200 11KW

 

Identification Voltage level
4 three-phase 380V
S2 Single-phase 220V

 

Identification Adaptive motor type
G General type

 

Identification 0.4 0.75 … 400
Adaptive motor(KW) 0.4 0.75 … 400

2.2 Introduction of various parts of the converter
The structure types of JAC580N series converter are the plastic and metal. The external diagram is shown below.

2.3 Basic technical specification 
Table 2-1 Technical specification of 580N series frequency converter

Item Specification
Standard functions Maximum frequency Vector control: 0~500Hz; V/F control: 0~500Hz
Carrier frequency 0.8kHz~12kHz
The carrier frequency is automatically adjusted based on the load features.
Input frequency
resolution		 Digital setting: 0.01Hz
Analog setting: maximum frequency x 0.571%
Control mode • Open-loop vector control (SVC)
• Closed-loop vector control (FVC)
• Voltage/Frequency (V/F) control
Starting torque • G type: 0.5 Hz/150% (SVC); 0 Hz/180% (FVC)
• P type: 0.5 Hz/100%

Basic functions

 Speed range 1:100  (SVC) 1:1000  (FVC)
Constant-speed accuracy ± 0.5%  (SVC) ± 0.02%  (FVC)
Overload capacity • G type:60s for 150% of the rated current
• P type: 60s for 120% of the rated current.
Torque boost • Fixed boost
• Customized boost 0.1%-30.0%
V/F curve • Straight-line V/F curve
• Multi-point V/F curve
•N-power V/F curve (1.2-power, 1.4-power, 1.6-power, ,1.8-power, square)
V/F separation Two types: complete separation; half separation
Acceleration /deceleration curve • Straight-line ramp
• S-curve ramp
Four groups of acceleration/deceleration time with the
range of 0.0-6500.0s
DC bra ept DC bra ept frequency: 0.00Hz~maximum frequency
Bra ept time: 0.0s~36.0s
Bra ept action current value: 0.0%-100.0%
JOG control JOG frequency range: 0.00-50.00 Hz
JOG acceleration/deceleration time: 0.0-6500.0s
Operation Command source Operation panel, control terminal and serial communication port are given
Switch in various methods
Frequency source Various frequency sources: digital reference, analog voltage reference, analog current reference, pulse reference and serial port reference. The switching can be conducted in various methods
Auxiliary frequency source 10 kinds of auxiliary frequency source. The auxiliary frequency jog and frequency synthesis can be achieved flexibly
Input terminal Standards:
7 digital input terminals, among which one support maximum high-speed pulse input of 100kHz
2 analog input terminals, among which one only supports voltage input of 0 ~10V and the other supports voltage input of 0 ~10V or current input of 4 ~20mA
Expansion capability:
3 digital input terminals
1 analog input terminal, which supports voltage input of -10V ~10V and supports PT100/PT1000
Output terminal Standards:
1 high-speed pulse output terminal (The open collector type is optional), supporting 0~100kHz square signal output
1 digital output terminal
1 relay output terminal
1 analog output terminal, supporting current output of 0~20mA or voltage output of 0~10V
Expansion capability:
1 digital output terminal
1 relay output terminal
1 analog output terminal, supporting current output of 0~20mA or voltage output of 0~10V
Display and keyboard operation LED display Display the parameter
Key lock and function selection Realize partial or all key lock and define the action range of some keys to prevent misoperation
Protection function Short circuit test of electrified motor, input/output default phase protection, overcurrent protection, overvoltage protection, undervoltage protection, overheat protection, overload protection, etc.

 

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

Frequency boston worm gear reducer catalog near me China in Bamenda Cameroon Inverter 3 pH 11kw Chinese AC Drive 60Hz to 50Hz Speed Controller Motor with top quality

Frequency boston worm gear reducer catalog near me China in Bamenda Cameroon Inverter 3 pH 11kw Chinese AC Drive 60Hz to 50Hz Speed Controller Motor with top quality

Amplifier worm motor best China in Veracruz Mexico Component Cooling Electric AC Motor for Lumbar Support Gear Mixer Motor with top quality

Amplifier worm motor best China in Veracruz Mexico Component Cooling Electric AC Motor for Lumbar Support Gear Mixer Motor with top quality

We – EPG Group the biggest gearbox & motors , couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

Amplifier Component Cooling Electric AC Motor for Lumbar Support Gear Mixer Motor 

Product characteristic 
(1) Adopting alternating current single-phase capacity machine and matching
(2) Output Speed: 600-920rpm
(3) Capacitor choice
15W-20W—————-1.5uF
25W-30W—————-2.0uF
45W-50W—————2.5uF
55W-60W—————3.0uF

Electrical specification 

MODEL VOLTAGE(VAC) FREQUENCY(HZ) OUT POWER(W) SPEED RATER(RPM) CURRENT(A) INSULATION CLASS
YP-120-50   120/230   50/60   150   1750   0.95     B
YP-120-40   120/230   50/60   120   1600   0.82     B
YP-120-35   120/230   50/60    95   1600   0.75     B
YP-120-30  120/230   50/60    75   1300   0.65     B
YP-120-25  120/230   50/60    60   1300   0.55     B
YP-120-20  120/230   50/60   40   1300   0.45     B

    NOTED :
                Shaft diameter (d) can be : φ5,φ5.5,φ6,φ6.35mm or as needed. 
                Stator stack thickness (A) can be any form 15mm to 50mm.
                Motor input power can be from 30W to 150W ( approx )
                Thermostat or fuse are both available for over heating protection. 

Mechanical dimensions 

Curve chart 

Trade & Market

Main Markets: Eastern Europe
South America
Western Europe
North America
Southeast Asia
Mid East
Total Annual Sales Volume: Above US$100 Million  
Export Percentage: 71% – 80%  

Factory Information

Factory Size (Sq.meters): 30,000-50,000 square meters  
No. of Production Lines: Above 10  
Number of R&D Staff: 41 – 50 People  
Number of QC Staff: 41 – 50 People  
Contract Manufacturing: OEM Service Offered   Design Service Offered   Buyer Label Offered  

About us 

Ritscher group was established in 2006.we always focus on micro-motors for household and industrial electrical appliance.Currently, we have professional micro-motor factories separatlly located in ZheJiang & ZHangZhoug province.It has 50,000 square meters plants and more than 500 employees, annual output  is 5 million pcs and has 10 million pcs annual producing capacity.After years development,we built a great reputation in the domestic and ove ept market and have the ept from our  global customers.
We  started our business from shaded pole motors, after 10 years development,our products  is enlarged to BLDC motors ,capacitor motors ,synchronous motors,stepping motors,servo motors, and PMDC motors.Our products  are widely used for ma ept refrigerators, freezers, micro-wave ovens, air warmers, air exhausters, ventilators,ovens, air filter, massage machines and many other equipments.
To design the lastest technology motors and meet our customers requirments,we have the very capable  R&D team,to ensure our products quality ,we have very strict manage system for our production department & QC department,to make our cost lower,we have the very professional purchase department, We dedicate to make every details better than we could do.
To offer quick and better service to our customers in Australia and New Zeland,we set up branch office in Australia since 2017 with exprienced consultant to support the business ,which will bring more customers to get know of us.
We will keep doing our job,move ept step by step to make our business area wider and brighter.

Our company FAQ for you

(1) Q: What kind motors you can provide?
A:For now,we mainly provide Kit ept Hood Motor,DC Motor,Gear Motor,Fan Motor Refrigerator Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor etc.

(2) Q: Is it possible to visit your factory
A: Sure. But please kindly keep us posted a few days in advance. We need to check our
schedule to see if we are available then.

(3) Q: Can I get some samples
A: It depends. If only a few samples for personal use or replacement, I am afraid it will
be difficult for us to provide, because all of our motors are custom made and no stock
available if there is no further needs. If just sample testing before the official order and
our MOQ, price and other terms are acceptable, we’d love to provide samples.

(4) Q: Is there a MOQ for your motors?
A: Yes. The MOQ is between 1000~10,000pcs for different models after sample approval.
But it’s also okay for us to accept smaller lots like a few dozens, hundreds or thousands
For the initial 3 orders after sample approval.For samples, there is no MOQ requirement. But the less the better (like no more than 5pcs) on condition that the quantity is enough in case any changes needed after initial testing.

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

Amplifier worm motor best China in Veracruz Mexico Component Cooling Electric AC Motor for Lumbar Support Gear Mixer Motor with top quality

Amplifier worm motor best China in Veracruz Mexico Component Cooling Electric AC Motor for Lumbar Support Gear Mixer Motor with top quality

60mm worm gearbox wikipedia Cost China in Sharjah United Arab Emirates 6W 10W AC Speed Control Gear Motor with top quality

60mm worm gearbox wikipedia Cost China in Sharjah United Arab Emirates 6W 10W AC Speed Control Gear Motor with top quality

We – EPG Group the biggest gearbox & motors , couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

60mm 6W 10W AC Speed Control Gear Motor, Speed control motor, Gear motor, AC motor

Features:
1) Dimensions: 60mm
2) Power: 6, 10W
3) Voltage: 110V, 220V
4) Speed: 50Hz: 90~ 1350rpm, 60Hz: 90~ 1650rpm
5) Reduction Ratio: 3~ 750K
 

Gearhead Model Gear Ratio
2GN *K 3,3.6,5,6,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,200~750
2GN10XK(Decimal gearhead)

Usage:
Our can be widely used in medical appliance, pac ept mechanism, printing mechanism, cup ma ept machine, textile machinery, and so on.

FAQ
Q: What’re your main products?
A: We currently produce Brushed Dc Motors, Brushed Dc Gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors, Ac Motors and High Precision Planetary Gear Box etc. You can check the specifications for above motors on our website and you can email us to recommend needed motors per your specification too.

Q: How to select a suitable motor?
A:If you have motor pictures or drawings to show us, or you have detailed specs like voltage, speed, torque, motor size, wor ept mode of the motor, needed lifetime and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.

Q: Do you have a customized service for your standard motors?
A: Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.

Q: Do you have an individual design service for motors?
A: Yes, we would like to design motors individually for our customers, but it may need some mold developing cost and design charge. 

Q: What’s your lead time?
A: Generally speaking, our regular standard product will need 15-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.

More about our products and company:

 

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

60mm worm gearbox wikipedia Cost China in Sharjah United Arab Emirates 6W 10W AC Speed Control Gear Motor with top quality

60mm worm gearbox wikipedia Cost China in Sharjah United Arab Emirates 6W 10W AC Speed Control Gear Motor with top quality