Tag Archives: China worm gear motor

Frequency boston worm gear reducer catalog near me China in Bamenda Cameroon Inverter 3 pH 11kw Chinese AC Drive 60Hz to 50Hz Speed Controller Motor with top quality

Frequency boston worm gear reducer catalog near me China in Bamenda Cameroon Inverter 3 pH 11kw Chinese AC Drive 60Hz to 50Hz Speed Controller Motor with top quality

We – EPG Group the biggest gearbox & motors , couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

2.1 Naming and nameplate identification
2.1.1 Naming rule
JAC200 11KW

 

Identification Voltage level
4 three-phase 380V
S2 Single-phase 220V

 

Identification Adaptive motor type
G General type

 

Identification 0.4 0.75 … 400
Adaptive motor(KW) 0.4 0.75 … 400

2.2 Introduction of various parts of the converter
The structure types of JAC580N series converter are the plastic and metal. The external diagram is shown below.

2.3 Basic technical specification 
Table 2-1 Technical specification of 580N series frequency converter

Item Specification
Standard functions Maximum frequency Vector control: 0~500Hz; V/F control: 0~500Hz
Carrier frequency 0.8kHz~12kHz
The carrier frequency is automatically adjusted based on the load features.
Input frequency
resolution		 Digital setting: 0.01Hz
Analog setting: maximum frequency x 0.571%
Control mode • Open-loop vector control (SVC)
• Closed-loop vector control (FVC)
• Voltage/Frequency (V/F) control
Starting torque • G type: 0.5 Hz/150% (SVC); 0 Hz/180% (FVC)
• P type: 0.5 Hz/100%

Basic functions

 Speed range 1:100  (SVC) 1:1000  (FVC)
Constant-speed accuracy ± 0.5%  (SVC) ± 0.02%  (FVC)
Overload capacity • G type:60s for 150% of the rated current
• P type: 60s for 120% of the rated current.
Torque boost • Fixed boost
• Customized boost 0.1%-30.0%
V/F curve • Straight-line V/F curve
• Multi-point V/F curve
•N-power V/F curve (1.2-power, 1.4-power, 1.6-power, ,1.8-power, square)
V/F separation Two types: complete separation; half separation
Acceleration /deceleration curve • Straight-line ramp
• S-curve ramp
Four groups of acceleration/deceleration time with the
range of 0.0-6500.0s
DC bra ept DC bra ept frequency: 0.00Hz~maximum frequency
Bra ept time: 0.0s~36.0s
Bra ept action current value: 0.0%-100.0%
JOG control JOG frequency range: 0.00-50.00 Hz
JOG acceleration/deceleration time: 0.0-6500.0s
Operation Command source Operation panel, control terminal and serial communication port are given
Switch in various methods
Frequency source Various frequency sources: digital reference, analog voltage reference, analog current reference, pulse reference and serial port reference. The switching can be conducted in various methods
Auxiliary frequency source 10 kinds of auxiliary frequency source. The auxiliary frequency jog and frequency synthesis can be achieved flexibly
Input terminal Standards:
7 digital input terminals, among which one support maximum high-speed pulse input of 100kHz
2 analog input terminals, among which one only supports voltage input of 0 ~10V and the other supports voltage input of 0 ~10V or current input of 4 ~20mA
Expansion capability:
3 digital input terminals
1 analog input terminal, which supports voltage input of -10V ~10V and supports PT100/PT1000
Output terminal Standards:
1 high-speed pulse output terminal (The open collector type is optional), supporting 0~100kHz square signal output
1 digital output terminal
1 relay output terminal
1 analog output terminal, supporting current output of 0~20mA or voltage output of 0~10V
Expansion capability:
1 digital output terminal
1 relay output terminal
1 analog output terminal, supporting current output of 0~20mA or voltage output of 0~10V
Display and keyboard operation LED display Display the parameter
Key lock and function selection Realize partial or all key lock and define the action range of some keys to prevent misoperation
Protection function Short circuit test of electrified motor, input/output default phase protection, overcurrent protection, overvoltage protection, undervoltage protection, overheat protection, overload protection, etc.

 

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

Frequency boston worm gear reducer catalog near me China in Bamenda Cameroon Inverter 3 pH 11kw Chinese AC Drive 60Hz to 50Hz Speed Controller Motor with top quality

Frequency boston worm gear reducer catalog near me China in Bamenda Cameroon Inverter 3 pH 11kw Chinese AC Drive 60Hz to 50Hz Speed Controller Motor with top quality

Heavy 12 volt worm gear motor Custom China in Medan Indonesia Equipment EEPT avator Dozer Undercarriage Front Idler Pulley for Caterpillar with top quality

Heavy 12 volt worm gear motor Custom China in Medan Indonesia Equipment EEPT avator Dozer Undercarriage Front Idler Pulley for Caterpillar with top quality

We – EPG Group the biggest gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

Idler
Material: 40Mn
Technology: Forging or Casting
Finish: Smooth
Hardness: HRC50-60
Deepth: 4mm-10mm
Heat treatment: Quenching
Dimensions: International Standard
Port: HangZhou
Supply Ability: 100000 Piece/Pieces per Month can improve
Packaging Detail: Wooden case/pallet
Delivery Detail: 10-20 days after the payment
Certificate: ISO9002
Warranty time: 6 months
Service: EPT and after-sale service
Our manufacturer can supply the Model below:
Komatsu:
PC40-7 PC60-5-6-7 PC75 PC100-3-5 PC120-5 PC130 PC200-2-3-4-5-6-7-8 PC220-1-3-5 PC230 PC240 PC300-1-5-6-7 PC400-1-3-5

Hitachi:
EX40 EX55 ZX55 EX55-5B EX60-2-3 EX70(ZX70) EX100M EX100-1-2-3-5 EX120 EX150 EX160 EX200-1-2-3-5 ZX200 ZX210 EX220 ZX230 EX300-1-2-3-5 EX330 EX400 UH08 UH07 UH10 UH14

Sumitomo:
SH60 SH65 SH100 SH120-A3 SH120 SH200 SH220-1-5 SH260 SH280 SH300-1-2-3 SH340 SH580-5 S25 S35 S120 S160 S250 S260 S265F2 S280 S280F2 S280FA

Kobelco:
SK30 SK40 SK60 SK100 SK120 SK200-1-6 SK220-1-3 SK230-3-6 SK300 SK320 SK07-1-2-7 SK07N2 SK09

Caterpillar:
E70 E110 E120B E180 E200B E240 E300B E307 CAT311 CAT312 E320 E325 E330 E450 MS180

Daewoo:
DH55 DH60 DH70 DH80 DH150 DH150W DH175 DH200 DH210 DH215-7-9 DH220-3-5-7 DH225 DH255 DH258 DH280 DH300 DH320 DH330 DH340 DH370 DH400

Kato:
HD250 HD250SE HD400 HD450 HD500 HD510 HD550 HD550SE HD650 HD700 HD770 HD800 HD1250 HD1430

Hyundai:
R55 R60-5-7-9 R80 R110 R130-1-2-7 R150 R190 R200-1-2 R210 R215 R220 R225-7 R265 R290 R305 R455

Volvo:
EC55B EC60C EC140B EC200B EC210B EC240B EC290B EC360B EC460B EC550

Bulldozer:
D20 D31 D50 D60 D65 D30 D40 D60-3 D6B D5 D80 D85 D3C D4C D4D D75 D80A-7 D4E D4H-1 D31-15 D31-18 D50-15 D50-16 D6D D5H D8N D9N D155 D31 D355 D10

HangZhou Fortune Machinery Co., Ltd. is one of main manufacturers and exporters of undercarriage parts for excavators and bulldozers for more than 10 years in China. Its factory is located at HangZhou City of ZheJiang Province, very near HangZhou Port with a very convenient transportation.

HangZhou Fortune Machinery mainly supply undercarriage replacement parts such as track rollers, top rollers, sprockets, segments, idler assy, track link assy, track shoe, bucket, bucket teeth, bucket link, I link, cutting side, end bits, bushings pins, bolts and nuts for excavators and bulldozers. Its products are applicable for most famous makes such as Komatsu, Hitachi, Caterpillar, Kobelco, Kato, Daewoo, Hyundai, Samsung and so on. Most products are exported to European, Southeast Asia, Middle East, South America etc.

With the principal “Good quality and Best services at reasonable prices”, we strive to continually improve our production technique to provide better products at better prices. We cordially welcome the customers from all over the world to consult and visit, on the basis of mutual benefit and creat refulgence together.
 

BRAND                
KOMATSU PC30 PC40 PC45 PC60 PC75 PC100 PC120 PC200
EXCAVATOR PC220 PC300 PC350 PC400        
CATERPILLAR E70B E110 E120 E200B E307 E311 E312 E320
EXCAVATOR E322 E325 E300B E330        
KOMATSU D20 D21 D30 D31 D37 D40 D50 D60
BULLDOZER D63 D65 D80 D85 D135 D155 D355 D375
CATERPILLAR D3C D3D D4 D4C D4D D4E D5 D5H
BULLDOZER D6 D6C D6D D6H D7E D7G D8N D9N
HITACHI EX30 EX40 EX60 EX100 EX120 EX200 EX220 EX300
  EX400 ZAX200 ZX330 ZX350 UH07 UH081 UH083  
DAEWOO DH55 DH200 DH220 DH280 DH300 DH320    
HYUNDAI R55 R110 R130 R150 R200 R210 R250 R290
KEBELCO SK60 SK100 SK120 SK200 SK220 SK300 K904 K907
MITSUBISHI MS110 MS120 MS140 MS180        
KATO HD140 HD250 HD400 HD550 HD700 HD850 HD900 HD1220
SAMSUNG H.I. MX8 SE200 SE210 SE280 MX292 SE350    
SUMITOMO SH70 SH100 SH120 SH160 SH200 SH280 SH300 SH340

Contact us:

HangZhou Fortune Machinery Co., Ltd.
Contact person:James

We – EPG Group the biggest gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

Heavy 12 volt worm gear motor Custom China in Medan Indonesia Equipment EEPT avator Dozer Undercarriage Front Idler Pulley for Caterpillar with top quality

Heavy 12 volt worm gear motor Custom China in Medan Indonesia Equipment EEPT avator Dozer Undercarriage Front Idler Pulley for Caterpillar with top quality

Amplifier worm motor best China in Veracruz Mexico Component Cooling Electric AC Motor for Lumbar Support Gear Mixer Motor with top quality

Amplifier worm motor best China in Veracruz Mexico Component Cooling Electric AC Motor for Lumbar Support Gear Mixer Motor with top quality

We – EPG Group the biggest gearbox & motors , couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

Amplifier Component Cooling Electric AC Motor for Lumbar Support Gear Mixer Motor 

Product characteristic 
(1) Adopting alternating current single-phase capacity machine and matching
(2) Output Speed: 600-920rpm
(3) Capacitor choice
15W-20W—————-1.5uF
25W-30W—————-2.0uF
45W-50W—————2.5uF
55W-60W—————3.0uF

Electrical specification 

MODEL VOLTAGE(VAC) FREQUENCY(HZ) OUT POWER(W) SPEED RATER(RPM) CURRENT(A) INSULATION CLASS
YP-120-50   120/230   50/60   150   1750   0.95     B
YP-120-40   120/230   50/60   120   1600   0.82     B
YP-120-35   120/230   50/60    95   1600   0.75     B
YP-120-30  120/230   50/60    75   1300   0.65     B
YP-120-25  120/230   50/60    60   1300   0.55     B
YP-120-20  120/230   50/60   40   1300   0.45     B

    NOTED :
                Shaft diameter (d) can be : φ5,φ5.5,φ6,φ6.35mm or as needed. 
                Stator stack thickness (A) can be any form 15mm to 50mm.
                Motor input power can be from 30W to 150W ( approx )
                Thermostat or fuse are both available for over heating protection. 

Mechanical dimensions 

Curve chart 

Trade & Market

Main Markets: Eastern Europe
South America
Western Europe
North America
Southeast Asia
Mid East
Total Annual Sales Volume: Above US$100 Million  
Export Percentage: 71% – 80%  

Factory Information

Factory Size (Sq.meters): 30,000-50,000 square meters  
No. of Production Lines: Above 10  
Number of R&D Staff: 41 – 50 People  
Number of QC Staff: 41 – 50 People  
Contract Manufacturing: OEM Service Offered   Design Service Offered   Buyer Label Offered  

About us 

Ritscher group was established in 2006.we always focus on micro-motors for household and industrial electrical appliance.Currently, we have professional micro-motor factories separatlly located in ZheJiang & ZHangZhoug province.It has 50,000 square meters plants and more than 500 employees, annual output  is 5 million pcs and has 10 million pcs annual producing capacity.After years development,we built a great reputation in the domestic and ove ept market and have the ept from our  global customers.
We  started our business from shaded pole motors, after 10 years development,our products  is enlarged to BLDC motors ,capacitor motors ,synchronous motors,stepping motors,servo motors, and PMDC motors.Our products  are widely used for ma ept refrigerators, freezers, micro-wave ovens, air warmers, air exhausters, ventilators,ovens, air filter, massage machines and many other equipments.
To design the lastest technology motors and meet our customers requirments,we have the very capable  R&D team,to ensure our products quality ,we have very strict manage system for our production department & QC department,to make our cost lower,we have the very professional purchase department, We dedicate to make every details better than we could do.
To offer quick and better service to our customers in Australia and New Zeland,we set up branch office in Australia since 2017 with exprienced consultant to support the business ,which will bring more customers to get know of us.
We will keep doing our job,move ept step by step to make our business area wider and brighter.

Our company FAQ for you

(1) Q: What kind motors you can provide?
A:For now,we mainly provide Kit ept Hood Motor,DC Motor,Gear Motor,Fan Motor Refrigerator Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor etc.

(2) Q: Is it possible to visit your factory
A: Sure. But please kindly keep us posted a few days in advance. We need to check our
schedule to see if we are available then.

(3) Q: Can I get some samples
A: It depends. If only a few samples for personal use or replacement, I am afraid it will
be difficult for us to provide, because all of our motors are custom made and no stock
available if there is no further needs. If just sample testing before the official order and
our MOQ, price and other terms are acceptable, we’d love to provide samples.

(4) Q: Is there a MOQ for your motors?
A: Yes. The MOQ is between 1000~10,000pcs for different models after sample approval.
But it’s also okay for us to accept smaller lots like a few dozens, hundreds or thousands
For the initial 3 orders after sample approval.For samples, there is no MOQ requirement. But the less the better (like no more than 5pcs) on condition that the quantity is enough in case any changes needed after initial testing.

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

Amplifier worm motor best China in Veracruz Mexico Component Cooling Electric AC Motor for Lumbar Support Gear Mixer Motor with top quality

Amplifier worm motor best China in Veracruz Mexico Component Cooling Electric AC Motor for Lumbar Support Gear Mixer Motor with top quality

60mm worm gearbox wikipedia Cost China in Sharjah United Arab Emirates 6W 10W AC Speed Control Gear Motor with top quality

60mm worm gearbox wikipedia Cost China in Sharjah United Arab Emirates 6W 10W AC Speed Control Gear Motor with top quality

We – EPG Group the biggest gearbox & motors , couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

60mm 6W 10W AC Speed Control Gear Motor, Speed control motor, Gear motor, AC motor

Features:
1) Dimensions: 60mm
2) Power: 6, 10W
3) Voltage: 110V, 220V
4) Speed: 50Hz: 90~ 1350rpm, 60Hz: 90~ 1650rpm
5) Reduction Ratio: 3~ 750K
 

Gearhead Model Gear Ratio
2GN *K 3,3.6,5,6,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,200~750
2GN10XK(Decimal gearhead)

Usage:
Our can be widely used in medical appliance, pac ept mechanism, printing mechanism, cup ma ept machine, textile machinery, and so on.

FAQ
Q: What’re your main products?
A: We currently produce Brushed Dc Motors, Brushed Dc Gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors, Ac Motors and High Precision Planetary Gear Box etc. You can check the specifications for above motors on our website and you can email us to recommend needed motors per your specification too.

Q: How to select a suitable motor?
A:If you have motor pictures or drawings to show us, or you have detailed specs like voltage, speed, torque, motor size, wor ept mode of the motor, needed lifetime and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.

Q: Do you have a customized service for your standard motors?
A: Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.

Q: Do you have an individual design service for motors?
A: Yes, we would like to design motors individually for our customers, but it may need some mold developing cost and design charge. 

Q: What’s your lead time?
A: Generally speaking, our regular standard product will need 15-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.

More about our products and company:

 

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

60mm worm gearbox wikipedia Cost China in Sharjah United Arab Emirates 6W 10W AC Speed Control Gear Motor with top quality

60mm worm gearbox wikipedia Cost China in Sharjah United Arab Emirates 6W 10W AC Speed Control Gear Motor with top quality