Guarantee: 1 12 months
Applicable Industries: Farms, Agricultural
Excess weight (KG): 354
Showroom Location: Netherlands
Movie outgoing-inspection: Offered
Equipment Test Report: Supplied
Marketing Kind: New Solution 2571
Warranty of core elements: 1 Calendar year
Main Components: Gearbox, Pulley, Device Shaft, Oil Cylinder
Type: Flail mower
Use: mowing weeds
Condition: New
Key Marketing Details: Large efficiency with extra doing work width
Transmission: Gearbox transmission
Major Market: Europe,North and South American,Australia
PTO Speed: 540r/min
Electricity Required: 25-50HP
Doing work width: 1200-1600 mm
ODMOEM: presented
Linkage: Three Point Mounted
Push kind: Tractor Hydraulic
Dimensions: 1754*1544*888
SFM160,SFM140,SFM120: 354KG, 334KG, 316KG
Packaging Particulars: tie every single pallet to the container inside of hook tightly,pound nails to the ground as effectively as crossed wrap every pallet with ropes.
Port: ZheJiang

Merchandise Description AWON SFM rear-aspect flail mower SFM rear-aspect sequence are rear mounted,PTO pushed flail mowers for tractors. 10 versions in overall,working width varies from 1,200 to 2,400mm,electricity need 25-130HP.SFM sequence can be generally aggregated with tractors with 3-position hitch of Cat.Ⅰor Ⅱ.SFM with paralellogram arm, allows operation in-line or at the facet of the tractor.Down-tilt angle can reach up to 45°, which is best each time highway shoulders and slopes need to have to be mowed (tilt angle amongst -45° +90°)SFM series are specifically made for carriageway routine maintenance,environmentally friendly belts,scarps,embankments,road shoulders or ditches. The mowers reduce the grass and unfold it effectively crumbled together the entire width of the minimize surface.It enables forming a organic swath and plant offcut mineralization. Merchandise Paramenters

Model	SFM120	SFM140	SFM160
Weight(Kg)	316	334	354
Cutting Width(mm)	1200	1400	1600
PTO Input Speed	540	540	540
Number of blades	18	20	24
Power essential(HP)	25-40	30-50	30-fifty

Merchandise Attributes 1.Increase reach up: up to 90°，down to -45° 2.Growth reach out: eighty levels offset three.Transport: AWON collection transport places the cutter head to the rear of the tractor for ideal operator visibility 4.Operation: 1)Permits increase of the machine when impediment is met two)Owing to the paralellogram arm works properly for heavy-responsibility roadmaintenance Assignments Recommend Goods Company Profile AWON Team was established in 2006 with its headquarter in the Netherlands, is an integrated solution supplier for modern day Agricultural, Orchard and Gardening programs. for some many years now AWON Equipment has created and made a broad selection of machinery including:mower, mulcher,wood shredder, cotton baler etc. Mulching is an crucial portion of contemporary agriculture and helps delivering a better developing atmosphere. Uniform software of the mulch stops soil erosion and pesticides, assists the decomposition of crop resides and fast absorption of the nutrient price, and in the long run will increase soil fertility. AWON Team connected specific relevance to China market, AWON manufacturing unit launched in HangZhou in 2012 to assistance the domestic market place of China and place into manufacturing in the very same calendar year. And a professional design and style crew committed to layout products primarily based on the characteristic of China’ s agricultural growth was created in 2015,much more and far more innovative products are introduced and made into the localization method and devoted ourselves for the efforts of rushing up the agricultural mechanization of China. The product sales-community of our business all over China would supply you our very best provider. Patent Certification The following are our patent certificates: Style Patent (mulcher), Utility Patent (branch mulcher, mulcher blades, select-up branch mulcher and telescopic mower) The adhering to are our original hand-painted drawings, originality has often been our pursuit! Payment & Delivery FAQ

The Different Types of Splines in a Splined Shaft

A splined shaft is a machine component with internal and external splines. The splines are formed in four different ways: Involute, Parallel, Serrated, and Ball. You can learn more about each type of spline in this article. When choosing a splined shaft, be sure to choose the right one for your application. Read on to learn about the different types of splines and how they affect the shaft’s performance.

Involute splines

Involute splines in a splined shaft are used to secure and extend mechanical assemblies. They are smooth, inwardly curving grooves that resist separation during operation. A shaft with involute splines is often longer than the shaft itself. This feature allows for more axial movement. This is beneficial for many applications, especially in a gearbox.
The involute spline is a shaped spline, similar to a parallel spline. It is angled and consists of teeth that create a spiral pattern that enables linear and rotatory motion. It is distinguished from other splines by the serrations on its flanks. It also has a flat top. It is a good option for couplers and other applications where angular movement is necessary.
Involute splines are also called involute teeth because of their shape. They are flat on the top and curved on the sides. These teeth can be either internal or external. As a result, involute splines provide greater surface contact, which helps reduce stress and fatigue. Regardless of the shape, involute splines are generally easy to machine and fit.
Involute splines are a type of splines that are used in splined shafts. These splines have different names, depending on their diameters. An example set of designations is for a 32-tooth male spline, a 2,500-tooth module, and a 30 degree pressure angle. An example of a female spline, a fillet root spline, is used to describe the diameter of the splined shaft.
The effective tooth thickness of splines is dependent on the number of keyways and the type of spline. Involute splines in splined shafts should be designed to engage 25 to 50 percent of the spline teeth during the coupling. Involute splines should be able to withstand the load without cracking.

Parallel splines

Parallel splines are formed on a splined shaft by putting one or more teeth into another. The male spline is positioned at the center of the female spline. The teeth of the male spline are also parallel to the shaft axis, but a common misalignment causes the splines to roll and tilt. This is common in many industrial applications, and there are a number of ways to improve the performance of splines.
Typically, parallel splines are used to reduce friction in a rotating part. The splines on a splined shaft are narrower on the end face than the interior, which makes them more prone to wear. This type of spline is used in a variety of industries, such as machinery, and it also allows for greater efficiency when transmitting torque.
Involute splines on a splined shaft are the most common. They have equally spaced teeth, and are therefore less likely to crack due to fatigue. They also tend to be easy to cut and fit. However, they are not the best type of spline. It is important to understand the difference between parallel and involute splines before deciding on which spline to use.
The difference between splined and involute splines is the size of the grooves. Involute splines are generally larger than parallel splines. These types of splines provide more torque to the gear teeth and reduce stress during operation. They are also more durable and have a longer life span. And because they are used on farm machinery, they are essential in this type of application.

Serrated splines

A Serrated Splined Shaft has several advantages. This type of shaft is highly adjustable. Its large number of teeth allows large torques, and its shorter tooth width allows for greater adjustment. These features make this type of shaft an ideal choice for applications where accuracy is critical. Listed below are some of the benefits of this type of shaft. These benefits are just a few of the advantages. Learn more about this type of shaft.
The process of hobbing is inexpensive and highly accurate. It is useful for external spline shafts, but is not suitable for internal splines. This type of process forms synchronized shapes on the shaft, reducing the manufacturing cycle and stabilizing the relative phase between spline and thread. It uses a grinding wheel to shape the shaft. CZPT Manufacturing has a large inventory of Serrated Splined Shafts.
The teeth of a Serrated Splined Shaft are designed to engage with the hub over the entire circumference of the shaft. The teeth of the shaft are spaced uniformly around the spline, creating a multiple-tooth point of contact over the entire length of the shaft. The results of these analyses are usually satisfactory. But there are some limitations. To begin with, the splines of the Serrated Splined Shaft should be chosen carefully. If the application requires large-scale analysis, it may be necessary to modify the design.
The splines of the Serrated Splined Shaft are also used for other purposes. They can be used to transmit torque to another device. They also act as an anti-rotational device and function as a linear guide. Both the design and the type of splines determine the function of the Splined Shaft. In the automobile industry, they are used in vehicles, aerospace, earth-moving machinery, and many other industries.

Ball splines

The invention relates to a ball-spinned shaft. The shaft comprises a plurality of balls that are arranged in a series and are operatively coupled to a load path section. The balls are capable of rolling endlessly along the path. This invention also relates to a ball bearing. Here, a ball bearing is one of the many types of gears. The following discussion describes the features of a ball bearing.
A ball-splined shaft assembly comprises a shaft with at least one ball-spline groove and a plurality of circumferential step grooves. The shaft is held in a first holding means that extends longitudinally and is rotatably held by a second holding means. Both the shaft and the first holding means are driven relative to one another by a first driving means. It is possible to manufacture a ball-splined shaft in a variety of ways.
A ball-splined shaft features a nut with recirculating balls. The ball-splined nut rides in these grooves to provide linear motion while preventing rotation. A splined shaft with a nut that has recirculating balls can also provide rotary motion. A ball splined shaft also has higher load capacities than a ball bushing. For these reasons, ball splines are an excellent choice for many applications.
In this invention, a pair of ball-spinned shafts are housed in a box under a carrier device 40. Each of the two shafts extends along a longitudinal line of arm 50. One end of each shaft is supported rotatably by a slide block 56. The slide block also has a support arm 58 that supports the center arm 50 in a cantilever fashion.

Sector no-go gage

A no-go gauge is a tool that checks the splined shaft for oversize. It is an effective way to determine the oversize condition of a splined shaft without removing the shaft. It measures external splines and serrations. The no-go gage is available in sizes ranging from 19mm to 130mm with a 25mm profile length.
The sector no-go gage has two groups of diametrally opposed teeth. The space between them is manufactured to a maximum space width and the tooth thickness must be within a predetermined tolerance. This gage would be out of tolerance if the splines were measured with a pin. The dimensions of this splined shaft can be found in the respective ANSI or DIN standards.
The go-no-go gage is useful for final inspection of thread pitch diameter. It is also useful for splined shafts and threaded nuts. The thread of a screw must match the contour of the go-no-go gage head to avoid a no-go condition. There is no substitute for a quality machine. It is an essential tool for any splined shaft and fastener manufacturer.
The NO-GO gage can detect changes in tooth thickness. It can be calibrated under ISO17025 standards and has many advantages over a non-go gage. It also gives a visual reference of the thickness of a splined shaft. When the teeth match, the shaft is considered ready for installation. It is a critical process. In some cases, it is impossible to determine the precise length of the shaft spline.
The 45-degree pressure angle is most commonly used for axles and torque-delivering members. This pressure angle is the most economical in terms of tool life, but the splines will not roll neatly like a 30 degree angle. The 45-degree spline is more likely to fall off larger than the other two. Oftentimes, it will also have a crowned look. The 37.5 degree pressure angle is a compromise between the other two pressure angles. It is often used when the splined shaft material is harder than usual.

editor by czh