Product Description
70HP 4*4 Diesel Wheel /Agricultural /Farm/Garden/Farming Tractors
Technical Parameters
| Model | TL704M | ||||||
| OUTPUT | 70HP | ||||||
| Type | 4WD | ||||||
| Tractor Specifications | Structure Weight (kg) | 2460 | |||||
| Min usage weight(kg) | 2660 | ||||||
| Rated Traction ( KN) | 16 | ||||||
| Tread (mm) | Front | 1290(Initial),1506 | |||||
| Rear | 1290(Initial),1506,1606 | ||||||
| Wheelbase(mm) | 2040 | ||||||
| Min. turning radius (m) | 4.5±0.3 | ||||||
| Min. ground clearance (mm) | 314 | ||||||
| Overall dimensions (mm) | L*W*H(mm) | 4571X1763X2655 | |||||
| Theoretical speed (km/h) (8+2) |
FRONT | L | I | 2.24 | |||
| II | 3.38 | ||||||
| III | 4.26 | ||||||
| IV | 7.14 | ||||||
| M | I | 5.63 | |||||
| II | 8.51 | ||||||
| III | 10.74 | ||||||
| IV | 17.98 | ||||||
| H | I | 11.39 | |||||
| II | 17.2 | ||||||
| III | 21.71 | ||||||
| IV | 36.35 | ||||||
| Reverse | L | I | 1.96 | ||||
| II | 2.96 | ||||||
| III | 3.74 | ||||||
| IV | 6.26 | ||||||
| M | I | 4.94 | |||||
| II | 7.46 | ||||||
| III | 9.41 | ||||||
| IV | 15.76 | ||||||
| H | I | 9.98 | |||||
| II | 15.07 | ||||||
| III | 19.03 | ||||||
| IV | 31.86 | ||||||
| Engine Specifications | Model | 4D32ZT31/704 | |||||
| Type | water-cooled,4 stroke,indirect injection | ||||||
| Aspirated type | Naturally aspirated ,Electronic unit pump,EGR | ||||||
| Bore*stroke (mm) | 98×105 | ||||||
| Rated power (kw) | 51.5 | ||||||
| Displacement (L) | 3.17 | ||||||
| Transimisson System | Clutch | dry,dual action,constant engaged | |||||
| Gear box | 4×3×(1+1) gears, 12 CZPT gear ,12 revese gear,with Synchronizer and gleeve shift | ||||||
| Differential | closed,pin type | ||||||
| Main drive | sprial bevel gear | ||||||
| Final drive | Single stage planetary gear | ||||||
| Brake systerm | Service brake | mechianical ,closed, dry,disc | |||||
| Parking service | hand,multiple | ||||||
| Travelling Mechanism | Tyre | Front/ Rear | 750-16/12.4-28 | ||||
| Steering gear | power steering | ||||||
| Operation systerm | Suspension | Max lifting capacity (kN) (610mm) | ≥12.4 | ||||
| Type | post-positioned, catalogue I | ||||||
| PTO | Rotating speed (r/min) | 540/1000 | |||||
| Optional | Balance weight, air brake, cabin, ROPS | ||||||
Tractor Features
1.Fuel consumption reach upto 1 liter/hour diesel.
2. Differential lock prevent rear wheels skidding when climbing, operating in paddy land and rainy weather.
3.Equip with double speed of PTO shaft 540/760 rpm. Adapted to different field type.
4.Adopt full hydraulic steering, independent fuel tank, easy operating and high mobility.
5.Adjustable front and rear tracks meet agricultural needs of different areas. Extra-large water tank and high capacity maintenance-free battery make the machine with best heat-dispersion and starting performance.
6.Can adopt to various implements,such as plough,disc plough,ratory tiller,disc harrow,etc
Company Profile
TANGLAND International Company, is a wholly-owned subsidiary of CZPT GROUP, is the professional
company for Trading & International Exchange and cooperation. We set up branches in ZheJiang , ZheJiang and HangZhou, as well as overseas assembling plant, or/and showing room and service centre, in Pakistan, UAE, and some Asian & African countries. CZPT GROUP is a comprehensive company including manufacturing, assembling, Casting & Foundry, producing Casting parts, Electric Vehicle, Tractor, Light truck, Semi-trailer, Steel ball and Nylon 6 products, Running an Industrial products’Information & Exchange Platform, the headquarter is in Ji’nan, ZheJiang , and assembling, machining & foundry and castingplants are in HangZhou, HangZhou, HangZhou and HangZhou, theInformation and Exchange platform named-TANGLANDINFORMATION & TECHNOLOGY COMPANY.
Workshop
Our Main Tractors
From 18HP to 210HP optional
2WD and 4WD optional
Open cabin, sunshade cabin and closed cabin optional
Belt drive and shaft drive tractor optional
1. Suitable for road transportation, various farmland operations: design different models according to different terrains such as paddy fields, dry land, mountains, orchards, hills, etc.
2. Can be equipped with all kinds of mechanical equipment and agricultural machinery: front loader, rear excavator, bulldozer, snowplow, plow, hoe, rotary tiller, lawn mower, etc.
Packaging&Shipping
Our Service
Pre-Sales Service
1. 24 hours online .Your inquiry will be quick reply by email .
2. Professionally and patiently introduction,details pictures and working video to show machine .
3.Visiting our Factory.
On-Sale Service
1,Test every machine and inspect the machine seriously .
2,Send the machine picture which you order , then packing it with standard export package after you confirm the machine is ok .
3,Delivery:If ship by sea .after delivery to seaport .Will tell you the shipping time and arrival time . Finally, send all original documents to you by Express. We will tell you the tracking number after we post the documents.
After-Sales Service
1. Training how to install the machine, training how to use,maintain and repair the machine.
2. Engineers available to service machinery overseas.
3. 24 hours online to solve any problem . Supply you English manual book and technical support , maintain and install video to help you solve the problem, or dispatch worker to your factory.
FAQ
Q1.What is your terms of payment?
A:T/T 40% as deposit,and 60% before loading.we will show you the photos of the products and packages before you pay the balance.
Q2.What your terms of delivery?
A:EXW,FOB,CFR,CIF.
Q3.How about your delivery time?
A:Generally,it will take about 20 days after receipt of deposit payment.The specific delivery time depends on the items and the quantity of your order.
Q4.Are you interested in dealership with local company?
A:Yes,we are quite interested in this business.we’d like to cooperate with some local partner to sell more tractors in local market and supply better service.
Q5.Do you test all your tractors before delivery?
A:Yes,we have 100% tractor test and complete quality control system before delivery.
Q6.How do you make our business long-term and good relationship?
A:1.We keep good quality,competitive price and efficient service to ensure our customers benefit;
2.We protect the benefit of dealer or agent,in specifical period and region.
| After-sales Service: | Yes |
|---|---|
| Warranty: | One Year |
| Type: | Wheel Tractor |
| Usage: | Farm Tractor, Garden Tractor, Lawn Tractor, Compact Tractor, Diesel Engine Tractor |
| Certification: | ISO, CCC, ISO/TS16949 |
| Drive Wheel: | 4WD |
| Customization: |
Available
| Customized Request |
|---|
Choosing the Right PTO Shaft For Your Tractor
There are a number of different PTO shaft types available for your tractor. These include the North American, German and Italian styles. They are also available in various series, each with different options for bearing diameter and cap-to-cap overall length. To choose the best shaft for your tractor, it’s important to know what kind of tractor you own and the type of PTO that you need.
IID shaft
When it comes to choosing the best IID shaft for your PTO, the selection process can be a challenge. Whether you are replacing the shaft in your own tractor or need to purchase one for a client, there are several factors to consider. The right PTO shaft for your tractor should be compatible with the equipment you currently use. For instance, a shaft that can be used in a farm tractor will fit a different farm tractor than one used in a construction machine.
First of all, a safety shield is a critical part of your IID shaft. The shielding will help keep the entire shaft free of any potential hazards. Typically, shielding will cover the straight part of the shaft, universal joints, and PTO connection. A shield can also help protect you from injury if you accidentally run into the shaft or touch the guard.
A power take off shaft will be the best choice if you are using a tractor for other applications, such as mowing, shredding, or plowing. A PTO shaft is also a crucial part if you own a large tractor or implement. It will allow you to operate your equipment with maximum efficiency.
An IID shaft is designed to slide into another piece when the tractor’s PTO is engaged. A disconnected IID shaft can pull the two pieces apart and cause the tractor to swing uncontrollably when it is engaged. This can cause serious injuries or even death. You should not engage a PTO if you aren’t certain of its strength.
To ensure the safety of the driveline shield, check for proper alignment of the PTO shaft. If it isn’t aligned properly, foreign materials can enter the shaft bearings. A damaged driveline shield can also lead to driveline separation, particularly when the tractor is making sharp turns or downhills. In addition, improper alignment of the drawbar may damage the protective shield that protects the shaft.
Choosing the right PTO series size requires proper measuring of each part. Measure the length of each yoke outside the PTO shaft and determine the appropriate PTO series size. The PTO yoke size chart can be helpful when choosing the correct size for your tractor.
Reverse PTO
Many different applications call for a reverse PTO shaft. These adapters allow the PTO shaft to be turned in the opposite direction of the engine, matching the rotation of the power take-off to the rotation of the equipment it drives. They can be used to space the power take-off away from the transmission case and improve clearance for a direct-coupled pump or driveshaft.
Reverse PTO shafts are available for CZPT . They are designed for six-spline 540-rpm applications. They also offer the option of multi-speed operation. Reversed PTOs are a great option for implements that can get stuck.
Reverse PTOs can be used on most types of PTO. The reverse version has a gearbox that allows it to rotate backward. These are ideal for implements that can get stuck in a field. A reverse PTO shaft makes it possible to work with the implement without having to wait for it to get unstuck.
When using a PTO, it’s important to know which type of gearbox is needed. If you have an older model, you’ll probably need a reverse PTO shaft. These are generally used on older, vintage tractors with ground drive PTO. The ground speed pTO shafts match the speed of the tractor’s final drive, so when the tractor is in reverse, the gearbox will turn backward. This feature will not function if you’re working stationary, though.
A tractor with a reverse PTO is important for a number of reasons. For example, the reverse PTO can help you turn a stuck tractor in the opposite direction, which is useful when a piece of farm equipment becomes stuck in mud or when you need to push a stuck implement back. In addition, it allows you to use the tractor’s power to operate various implements. The reverse PTO also helps you know how much power is needed to run various implements on various terrain.
In addition to being convenient, reverse PTO shafts also help reduce the risk of damage to implements attached to the PTO. It’s vital to keep a PTO shaft in good working order.
Square rigid shaft
When you are looking for a new square rigid PTO shaft, you should consider a few factors. Choosing the right one can be a challenge, as the process is not always simple. For instance, there are a lot of choices when it comes to different brands and interpretations. You can even choose to purchase a square rigid shaft that is not square.
Torsional rigidity is a measure of the ability of a shaft to resist torsional forces. The higher the value of J, the more rigid the shaft will be. For example, a steel shaft has a higher torsional rigidity than an HDPE shaft. The correct value of J can have a big impact on the design decisions.
Another factor to consider is the type of shaft coupling. Rigid shaft couplings are best for shafts that are perfectly aligned. While flexible couplings are flexible enough to accommodate small misalignments, they are not as flexible as the flexible ones. Rigid shaft couplings, which are typically made of metal, are not designed for high-speed rotation.
Rigid couplings are a good choice for a wide range of applications. Rigid couplings are available in many sizes and configurations, and can be used with either a powered or an unsupported shaft. Rigid couplings are also available with keyways to transmit torque.
Torsional rigidity depends on the geometry of the components. A higher torsional rigidity means a shaft is more resilient to twisting. However, excessive twisting can result in unstable performance. As a result, it is important to avoid over-twisting a shaft.
Flange couplings are another option. These couplings have two flanges that are attached to each other with bolts or nuts. They are very similar to split muff couplings and sleeve couplings. The difference is that flange couplings have two flanges – one for the shaft and one for the coupling hub.
If you are thinking about purchasing a square rigid PTO shaft for your tractor, be sure to consider the features that will best serve your specific needs. While you may be considering the price of this new shaft, remember that it is a machine part that could be dangerous.
Economy PTO
There are several standard types of PTO shafts. They can vary in diameter and number of splines, and are designed to work with a specific speed range. The following are the main differences between these types. Choosing the right type for your application will depend on its application. One of the most important considerations to make when choosing a PTO shaft is the ratio between the shaft’s diameter and the toothed wheels that are attached to it.
When choosing a PTO shaft, consider the amount of torque you need. In general, an economy PTO shaft should be able to support a maximum load of 540 Nm. In addition, it should be able to handle a high-speed output. An economy PTO shaft may need less torque than a high-performance model.
Economy PTO shafts come in two basic styles: North American and Italian. These two types are designed to provide constant-speed output and balance the power input of a tractor. There are also various other styles of PTO shafts available, including square and rectangular half-shaft assemblies. You can also purchase extra parts to repair a worn PTO shaft.
The control/monitoring unit in a PTO includes a screen display and a manual control for selecting engaged or disengaged PTO states. In addition, there is a switch in the cab mounted control unit 14 that selects normal and economy modes when driving the PTO. These modes utilize different gears to achieve the desired PTO shaft revs.
To select the right PTO speed, select the lever in economy mode and increase the throttle to the appropriate rpm. The PTO speed should be 540 RPM. The control/monitoring unit 14 will use this information to adjust the clutch control parameters. In addition to the PTO speed, it will also display the torque on the PTO shaft.
Economy PTO shafts are ideal for a variety of applications. These PTOs allow the tractor to run at lower rpms, thereby reducing noise and vibrations. They are typically available in both hydraulic and mechanical types.
editor by CX 2023-05-06