Product Description
LLA Type Tyre Coupling(JB/T10541-2005)
♦Description
The LLA Flexible Tyre Coupling is a kind of high elastic coupling, with good damping buffer and superior offset compensation performance.
The working temperature of 20~80 degrees Celsius, transmitting torque 10~20000N.m, suitable for damp, dust, shock, vibration, reversing the changeable and frequent starting working conditions, and convenient assembly and disassembly, no lubrication, durable and reliable. Non standard couplings are made in accordance with special needs. In overloading work and half coupling, there will be no malignant accidents.♦Main Dimension and Parameter
| Type | Main dimension | Number of screws Md×L |
Shaft hole diameter d dz |
Shaft hole length | Allowable Torque |
Allowable Speed |
Rotary inertia | Mass | |||
| D | D1 | S | L | L1 | Tn | (n) | kg·m2 | kg | |||
| Y J1 J | Z | N·m | r/min | ||||||||
| LLA1 | 60 | 20 | 4 | 12-M4×10 | 6-11 | 16-25 | – | 10 | 5000 | 0.0004 | 0.35 |
| LLA2 | 100 | 36 | 8 | 12-M6×20 | 8-19 | 14-42 | 35 | 20 | 5000 | 0.005 | 1.33 |
| LLA3 | 135 | 48 | 12 | 12-M8×25 | 18-28 | 30-62 | 35-50 | 80 | 4000 | 0.571 | 3.4 |
| LLA4 | 180 | 64 | 18 | 12-M10×30 | 25-38 | 44-82 | 50-65 | 160 | 3150 | 0.071 | 7.4 |
| LLA5 | 210 | 80 | 18 | 16-M10×40 | 32-50 | 60-112 | 65-90 | 315 | 2800 | 0.154 | 13.4 |
| LLA6 | 265 | 100 | 24 | 16-M12×40 | 40-56 | 84-112 | 90 | 630 | 2500 | 0.46 | 22.6 |
| LLA7 | 310 | 120 | 28 | 16-M16×50 | 48-75 | 84-142 | 90-120 | 1250 | 2000 | 1.86 | 34.8 |
| LLA8 | 400 | 150 | 38 | 16-M20×60 | 60-95 | 107-172 | 120-145 | 2500 | 1600 | 3.57 | 74.3 |
| LLA9 | 450 | 190 | 42 | 20-M20×70 | 80-125 | 132-212 | 145-180 | 5000 | 1250 | 6.47 | 111 |
| LLA10 | 550 | 230 | 52 | 24-M24×80 | 100-150 | 167-252 | 180-220 | 10000 | 1000 | 17.55 | 191 |
| LLA11 | 700 | 280 | 70 | 32-M30×90 | 130-180 | 202-302 | 220-270 | 20000 | 800 | 54.1 | 373 |
Note:
1. For 2 half coupling Shaft holes, Y,J,J1 type shaft hole may be used as required,but Z,J type shaft hole shall not be used at both ends.
2. S dimension should take into consideration if Z1 shaft hole is to be used.
♦Other Products List
| Transmission Machinery Parts Name |
Model |
| Universal Coupling | WS,WSD,WSP |
| Cardan Shaft | SWC,SWP,SWZ |
| Tooth Coupling | CL,CLZ,GCLD,GIICL, GICL,NGCL,GGCL,GCLK |
| Disc Coupling | JMI,JMIJ,JMII,JMIIJ |
| High Flexible Coupling | LM |
| Chain Coupling | GL |
| Jaw Coupling | LT |
| Grid Coupling | JS |
♦Our Company
HangZhou CZPT Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the design and manufacture of various types of coupling. There are 86 employees in our company, including 2 senior engineers and no fewer than 20 mechanical design and manufacture, heat treatment, welding, and other professionals.
Advanced and reasonable process, complete detection means. Our company actively introduces foreign advanced technology and equipment, on the basis of the condition, we make full use of the advantage and do more research and innovation. Strict to high quality and operate strictly in accordance with the ISO9000 quality certification system standard mode.
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of “quality first, service first, continuous improvement and innovation to meet the customers” for the management and “zero defect, zero complaints” as the quality objective.
♦Our Services
1.Design Services
Our design team has experience in cardan shaft relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.
2.Product Services
Raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→ Packing → Shipping
3.Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.
4.Research & Development
We usually research the new needs of the market and develop the new model when there is new cars in the market.
5.Quality Control
Every step should be special test by Professional Staff according to the standard of ISO9001 and TS16949.
♦FAQ
Q 1: Are you trading company or manufacturer?
A: We are a professional manufacturer specializing in manufacturing various series of couplings.
Q 2: Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with customized artworks of PDF or AI format.
Q 3: How long is your delivery time?
Generally it is 20-30 days if the goods are not in stock. It is according to quantity.
Q 4: Do you provide samples ? Is it free or extra ?
Yes, we could offer the sample but not for free. Actually we have a very good price principle, when you make the bulk order then cost of sample will be deducted.
Q 5: How long is your warranty?
A: Our Warranty is 12 months under normal circumstance.
Q 6: What is the MOQ?
A: Usually our MOQ is 1 pcs.
Q 7: Do you have inspection procedures for coupling ?
A: 100% self-inspection before packing.
Q 8: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.
Q 9: What’s your payment?
A: T/T.
♦Contact UsWeb: huadingcoupling
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China
| Standard Or Nonstandard: | Standard |
|---|---|
| Shaft Hole: | as Required |
| Torque: | as Required |
| Bore Diameter: | as Required |
| Speed: | as Required |
| Structure: | as Required |
| Samples: |
US$ 500/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
PTO Shaft Safety Chains
PTO shaft is the part of a tractor that helps transfer power from the tractor to the equipment it is hooked to. A PTO shaft is important if you have a tiller or bush hog. The correct PTO shaft size is crucial for both the tractor and the equipment. If the PTO shaft size is not correct for your equipment, it may not work.
Safety chains
<br/Safety chains are an essential part of securing your PTO shaft. They prevent a rotating plastic shield from coming loose and causing injury or damage. It is important to protect your PTO and any other drive shafts on your machine. Watch the video below for more information about the dangers of unguarded PTOs.
PTOs are an efficient way to transfer mechanical power between tractors and implements. They helped revolutionize North American agriculture during the 1930s. Despite their convenience, PTOs have also proven to be one of the most common farm machinery hazards. This fact sheet outlines several important PTO safety precautions.
Safety chains for PTO shafts are necessary to protect both tractor and implement from damage. The PTO shaft must be attached properly to the tractor and the implement before starting the equipment. Before operating, be sure that the safety chains are positioned in a way that allows them to fully move. When operating the PTO, avoid being too aggressive as this can damage the drive line and shaft. For further safety, make sure to fit a torque limiter or clutch on the implement end of the PTO shaft.
PTOs are great for plowing, mowing, and shredding, but they also have potential to cause injuries if you don’t use a safety chain. It’s best to get a chain that is long enough to prevent injuries. Also, be sure that the PTO shaft does not compress completely at any point during the operating range. There should be several inches of overlap in the longest operating extension of the PTO.
Another common hazard with PTOs is IID shafts. While many machines and tractors have driveline guards, these are often missing. If you have a PTO with an IID, you should consider installing a safety chain.
Shield
A swingable tractor PTO shaft shield assembly consists of an inverted U-shaped shield member slidably attached to a bracket. It extends above the PTO shaft and has several notches and pins that engage each other. It can be held in a number of positions and can be retracted when not in use. It also includes a cover member that covers the space between the shield and tractor and abuts the raised portion of the shield member.
The PTO shaft shield is typically made of plastic, but it can also be made of metal. Plastic is less likely to break or damage than metal. The shield is supported by a bracket 51 with a curved distal end 57 and a non-metallic guard 59. When used in conjunction with a bracket, a PTO shaft shield should be properly installed to prevent damage to the shaft.
Keeping the PTO shaft shield in good condition is crucial to the safety of your tractor and your workers. An improperly installed PTO shaft shield can result in severe injuries. It may also ensnare or strike people in the vicinity. Proper maintenance will prevent many of these injuries. Equipment manufacturers have made great strides in reducing the risks of PTO mishaps. Operators are also responsible for keeping the shields in good condition. Removing the guards will only increase the risk to the operator.
A PTO shaft shield is a tubular assembly that is mounted on the tractor PTO shaft. It consists of two telescopic pieces that are held in place by shield support bearings. This shield protects the PTO shaft and the universal joints from debris and prevents premature wear. The shield can be easily removed and replaced if necessary.
IID shaft guard
The IID shaft guard is a safety device used to protect PTO powered machinery from the possibility of separating while in use. The shaft, which is a telescoping shaft, is attached to the PTO stub on tractors. The telescopic feature is convenient when moving across uneven ground. However, this type of shaft can cause serious injury if it separates while in use.
The IID shaft guard can prevent these injuries by completely covering the shaft. The guard is made of metal or plastic and rotates along with the shaft. A person can react in less than five tenths of a second, making the IID shaft guard an important part of PTO safety.
PTO shafts rotate at speeds as high as 540 rpm, which is very fast. A limb could be wrapped around the driveline shaft, causing a serious injury or death. Because of the speed of a PTO, it can be difficult for an individual to discern whether it is engaged or not and may not be aware of the danger.
An IID shaft guard should be fitted to every tractor PTO shaft. It should be tested and rotated regularly. It is also important to keep the tractor engine off when working around the PTO shaft. Using a drawbar to protect driveline components is also important. It will prevent stress on the driveline and reduce the possibility of separation.
Overrunning clutch
An overrunning clutch on a PTO shaft is a mechanism that allows the PTO shaft to rotate freely in one direction while restricting the speed of the implement being hauled behind the tractor. This clutch is also useful for preventing the speed of the implement from exceeding the speed of the tractor while slowing down. It comes in two basic configurations, one for a clockwise and the other for a counter-clockwise direction.
Another type of overrun clutch is used on tractors with a PTO driven bush hog. A bush hog has a flywheel and blades that drive the transmission through the PTO shaft. Without an overrunning clutch, these implements would freewheel while the tractor is driving and would potentially break the shaft.
A PTO overrunning clutch prevents power from backfeeding into the transmission, the part that transmits power to the rear wheels. Without an overrunning clutch, the tractor could backfeed power, causing an accident if the blade assembly hits an object. As such, it is essential to use the overrunning clutch to ensure that your tractor will be safe.
Direction of rotation
Despite its name, the direction of rotation of a PTO shaft can change if necessary. Most PTOs have a single-direction rotation, but you can often reverse the direction by installing a reverse PTO adapter. However, you should only use reverse PTOs when absolutely necessary.
A standard PTO rotation direction has been defined by the International Organization for Standardization (ISO). It is considered necessary to adhere to this standard, as improper rotation can cause damage to implements attached to a PTO. This standard helps farmers avoid problems such as ruined implements. While the direction of rotation of a PTO shaft is not always the same for all PTOs, there are some tractors that allow it to rotate both ways, while others have no restrictions.
The direction of rotation of a PTO shaft can be changed by using a hydraulic pump. Another way to connect a PTO is through a “sandwich” type split shaft unit. These units are mounted between the transmission and engine, and they usually receive drive directly from the engine shaft. They can also deliver complete engine power to a PTO. However, you must modify your vehicle’s driveline to install such a split-shaft unit.
editor by CX 2023-05-25
China Stainless Steel Flexible Double Universal Cardan Joint Pto Drive Wsp Type Retractable Small Cross Shaft Universal Joint Coupling with Great quality
Merchandise Description
Densen customized SWC-BF Kind universal coupling shaft coupling,common couplings joint
We have pros to remedy your inquiries, please make contact with us right!
| Product Identify | Densen customized SWC-BF Sort common coupling shaft coupling,common couplings joint |
| DN mm | a hundred and sixty~640mm |
| Axis Angle | 25/15° |
| Rated Torque | sixteen~1250 N·m |
| Exhaustion torque | 8~630N·m |
| Content | 35CrMo |
| Application | Extensively used in metallurgy, mining, engineering and other fields. |
Why Decide on Us
1. 1 end service:
We have 5 own factories and fifty+ sub-contractors found in various regions of China to supply you 1-end manufacturing and purchasing providers to assist you conserve time and reduce procurement value.
2. Your eyes in China:
Our commitment to quality permeates from quoting, scheduling, production, inspection to supply into your warehouse, our QC staff will remark the glitches if has on QC files for your examining prior to shipping as your 3rd celebration.
3. Your R&Dconsultant:
With skilled engineers group and 29 years manufacture expertise ,we would aid you function out problems for the duration of new parts’ growth, optimize design and style and suggest the most cost-successful answer.
4. Your Unexpected emergency Solver:
With continued grown factories staff and our QC groups situated in different areas, if customers need to expedite the shipping and delivery, we would be CZPT to adopt another manufacturing facility to generate with each other right away.
5. Top quality Warranty:
No subject how extended time the items sent, we are responsible for the good quality. In case the merchandise be rejected, we would replace them or return fund in accordance to your demand from customers with no hesitation
FAQQ1. Are you a producer or a trader?
Manufacture, we have 5 possess foundries, 4 in ZheJiang Province, 1 in ZHangZhoug Province
Q2. Do you have MOQ request?
1 pcs for each purchase is okay with us , except if material is rarely used.
Q3. If I only have a sample,with no drawings, can you estimate then manufacture for me?
Just ship us the sample, we would have the sample simulated and calculated by professional equipment then situation formal drawings for
you , at the exact same time, we could support you enhance the design and style according to your demand and relevant processes’ feasibility.
|
US $10-59 / kg | |
1 kg (Min. Order) |
###
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
###
| Standard Or Nonstandard: | Standard |
|---|---|
| Structure: | Universal |
| Material: | Steel |
###
| Samples: |
US$ 20/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Product Name | Densen customized SWC-BF Type universal coupling shaft coupling,universal couplings joint |
| DN mm | 160~640mm |
| Axis Angle | 25/15° |
| Rated Torque | 16~1250 N·m |
| Fatigue torque | 8~630N·m |
| Material | 35CrMo |
| Application | Widely used in metallurgy, mining, engineering and other fields. |
|
US $10-59 / kg | |
1 kg (Min. Order) |
###
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
###
| Standard Or Nonstandard: | Standard |
|---|---|
| Structure: | Universal |
| Material: | Steel |
###
| Samples: |
US$ 20/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Product Name | Densen customized SWC-BF Type universal coupling shaft coupling,universal couplings joint |
| DN mm | 160~640mm |
| Axis Angle | 25/15° |
| Rated Torque | 16~1250 N·m |
| Fatigue torque | 8~630N·m |
| Material | 35CrMo |
| Application | Widely used in metallurgy, mining, engineering and other fields. |
The Different Parts of a PTO Shaft
Power Take-Off (PTO) shafts are an integral part of a tractor’s driveline. Without them, a tractor cannot operate. It is essential to understand the different parts of a PTO shaft, as they are crucial for the operation of your tractor. These parts are typically overlooked during routine tractor maintenance checks, but knowing more about them will help you practice on farm machinery better.
Tractor’s power take-off (PTO) shaft
A Tractor’s power take-off (or PTO) shaft transfers power from the tractor to an implement. These shafts typically rotate at speeds between 540 and 1000 rpm. A number of safety features help prevent accidental contact between the shaft and the implement.
In order to avoid this problem, tractor operators should be vigilant while operating their tractors. They should make sure that the tractor’s power take-off (PTO) shaft is shielded. These shields include a master shield for the PTO stub, a PTO integral journal shield, and an implement input connection shield. The PTO master shield is mounted on the tractor and extends over the PTO stub on three sides. It is designed to prevent collisions between the tractor and any connected machine drive shaft.
A power take-off (PTO) shaft is an important component on any tractor. It is a shaft that transmits mechanical power from a tractor to an implement or separate machine. Early PTOs used a transmission and were located at the rear of the tractor. They are now available with hydraulic or mechanical drivelines. These power take-offs transfer the tractor’s power to a secondary piece of equipment through a driveshaft.
Proper PTO shaft guards protect people from stepping on rotating shafts. The PTO should not compress fully at any point in the operating range. It should have several inches of overlap at the maximum operating extension. A PTO guard should be positioned properly for each machine.
Despite these benefits, there are still many risks associated with PTO shafts. These powerful and potentially dangerous pieces of machinery can cause severe injury if not used safely. Luckily, proper installation of safety shields can reduce the risk of injury.
Types
PTO shafts come in a variety of different shapes, sizes, and materials. The most common types are square and round, but there are also star-shaped and trilobed types. While the star-shaped type is a typical North American design, the trilobed and lemon-shaped varieties are typically German or Italian. Typically, the lemon-shaped ones are made of an alloy called ‘Lemon Yellow.’ In some cases, the shaft will come with snap rings.
Different manufacturers use various materials for their PTO shafts. The tube of a welded drive shaft must be strong enough to handle the force exerted by the PTO. There are many different materials available, but some are stronger than others. Before choosing the type of drive shaft that is right for your machine, make sure that you know the exact measurements of your driveline.
When deciding between different types of PTO shafts, you must also consider the materials that will be used for your particular application. While splines are the most common material for PTO shafts, you can find various types that have different uses. Carbon steel is malleable and has a low carbon content, which makes it more reliable. A ferrous steel is more durable and contains metals like nickel, chromium, and molybdenum, which make it a great alternative to carbon steel.
A PTO gearbox input shaft extends between the PTO gearbox and the PTO clutch. It is mounted with a toothed wheel 8. An inductive sensor 9 on the shaft outputs a pulsed electronic signal based on the rotational speed of the shaft. These pulsed signals are called inductive speed sensors.
Rotation direction
The PTO shaft is a critical part of the power take-off of a farm tractor. It allows the tractor to transfer power from the engine to an implement such as a mower or other garden equipment. The rotation direction of the PTO shaft depends on the type of implement. Some implements only accept rotation in one direction, while others require rotation in both directions.
Safety chain
One of the best ways to protect your PTO shaft is to use a safety chain. A safety chain is a chain that is attached to the PTO shaft, and it prevents the plastic shield from spinning on the shaft. This chain should be fastened to a suitable point on your machine or tractor. It should not be attached to the lower lift arms or the U-guard.
PTO shafts can be very dangerous if they are not guarded. They can rotate as high as 1000 rpm and could seriously injure you. It is also important to ensure that the PTO shaft guard is fitted correctly, and that the tractor is turned off before working on it. In addition, avoiding wearing loose clothing when working around a PTO shaft can help protect your life.
Another way to protect the PTO shaft is to shield the IID shaft. This can be done by using shielding over the straight part of the shaft, the PTO connection, or the Implement Input Connection. A protruding bolt or pin can catch clothing and snag it. If not shielded, the clothing can wrap around the shaft, trapping the person against it.
A good safety chain should be positioned between the tractor and the PTO shaft. The chain should be at least 50 mm wider than the PTO shaft, and should be in good condition. It should cover the entire length of the PTO shaft from the tractor to the first bearing. The PTO shaft must also be fitted with the correct bearing ring. It is also vital to ensure that the PTO guard does not bend or break, as this could result in damage to the PTO shaft.
Shield
A PTO shaft shield protects the PTO shaft from possible impacts. It is typically made of plastic, but can also be made of metal. These shields are easy to damage, and are therefore preferably made of a durable material. The shields are held in place with brackets. The shields are made with two parts: an inner shield and a protective sleeve.
An improvement to the PTO shaft shield is a bracket that supports both the outer and PTO shaft. It is shown in conjunction with a towed machine in FIGS. 2 and 7. FIG. 7 is a side elevation of the bracket mounted to the tongue of the machine. This shield is designed to prevent the PTO shaft from becoming damaged during the towed process.
The main risk associated with PTO mishaps is entanglement, which can result in serious injuries. If a shaft separates from a tractor, it can strike nearby workers or people. Proper maintenance can minimize the risk of entanglement and save lives. Thankfully, equipment manufacturers have made huge strides in reducing the risk of these accidents. Operators should always make sure that the PTO shaft shield is in place to avoid the risk of entanglement.
In addition to preventing entanglement, a PTO shaft shield also helps protect the universal joints that are mounted on the PTO shaft. The shield is made of plastic or steel. It is typically shaped like an inverted U and covers both the top and sides of the shaft. A detachable PTO shaft shield is also available.
As with all parts of a PTO driveline, the PTO shaft shield should be maintained to prevent damage to the bearings. It is necessary to inspect the shield and replace it whenever it becomes damaged. PTO equipment is often used outdoors, and it is frequently exposed to crop debris, rust, and dirt that can affect the bearings. Proper maintenance will extend the equipment’s lifespan and reduce maintenance costs.
editor by czh 2022-12-26
China High Quality Standard Cardan Flexible Coupling Shaft agri supply pto shaft
Solution Description
Telescopic quick cardan shaft Coupling(SWP-B)
SWP break up bearing housing cross shaft universal coupling is appropriate for machinery,lifting and transportation machinery and other heavy machinery. Connecting 2 axes whose axes are not on the identical straight line. The rotation diameter is 160-640mm. The nominal torque Tn=16-1250Kn·m,axis angle A-F sort β≤25°.G type≤5°. SWP common joint coupling is connected to the other mechanical parts by large toughness bolts and self locking nuts. The torque is transmitted via the flange end key and the friction amongst the flange.
♦SWP B Type Cardan Shaft Simple Parameter And Major Dimension(JB/T3241-1991)
| Type | Tactical diameter D mm |
Nominal torque Tn kN·m |
Fatique torque Tf kN·m |
Axis angle β (°) |
Stretch duration S mm |
Measurement(mm) | Rotary inertia kg·m2 |
Mass kg |
|||||||||
| L | D1 js11 |
D2 H7 |
D3 | E | E1 | B×h | h1 | L1 | n-d | ||||||||
| SWP160B | a hundred and sixty | sixteen | 8 | ≤10 | 50 | 585 | a hundred and forty | ninety five | 114 | 15 | four | 20×12 | six | eighty five | 6-thirteen | .14 | forty four |
| SWP180B | 180 | twenty | ten | ≤10 | 60 | 640 | a hundred and fifty five | 105 | 121 | fifteen | four | 24×14 | seven | ninety five | 6-fifteen | .23 | fifty four |
| SWP200B | two hundred | 31.5 | 16 | ≤10 | 70 | 730 | one hundred seventy five | a hundred twenty five | seventeen | seventeen | five | 28×16 | 8 | 110 | eight-fifteen | .36 | 75 |
| SWP225B | 225 | forty | twenty | ≤10 | seventy six | 830 | 196 | 135 | 152 | 20 | 5 | 32×18 | 9 | one hundred thirty | eight-seventeen | .sixty one | 108 |
| SWP250B | 250 | sixty three | 31.five | ≤10 | 80 | 860 | 218 | 150 | 168 | 25 | 5 | 40×25 | 12.five | a hundred thirty five | eight-19 | .ninety eight | 138 |
| SWP285B | 285 | ninety | 45 | ≤10 | a hundred | a thousand | 245 | 170 | 194 | 27 | 7 | 40×30 | fifteen | one hundred fifty | 8-21 | 2.12 | 229 |
| SWP315B | 315 | a hundred and forty | 63 | ≤10 | one hundred ten | 1120 | 280 | 185 | 219 | 32 | seven | 40×30 | 15 | a hundred and seventy | 10-23 | 3.80 | 309 |
| SWP350B | 350 | a hundred and eighty | ninety | ≤10 | one hundred twenty | 1230 | 310 | 210 | 245 | 35 | eight | 50×32 | sixteen | 185 | 10-23 | six.60 | 408 |
| SWP390B | 390 | 250 | 112 | ≤10 | 120 | 1310 | 345 | 235 | 273 | 40 | eight | 70×36 | 18 | 205 | ten-twenty five | 10.50 | 539 |
| SWP435B | 435 | 355 | 160 | ≤10 | 150 | 1555 | 385 | 255 | 299 | forty two | ten | 80×40 | twenty | 235 | 16-28 | 22.39 | 903 |
| SWP480B | 480 | 450 | 224 | ≤10 | a hundred and seventy | 17440 | 425 | 275 | 351 | 47 | 12 | 90×45 | 22.five | 265 | sixteen-31 | 38.21 | 1243 |
| SWP550B | 550 | 710 | 315 | ≤10 | one hundred ninety | 1905 | 492 | 320 | 402 | fifty | 12 | 100×45 | 22.five | 290 | sixteen-31 | 61.00 | 1643 |
| SWP600B | 600 | 1000 | five hundred | ≤10 | 210 | 2600 | 544 | 380 | 450 | 55 | fifteen | 90×55 | 27.five | 360 | 22-34 | 99.13 | 2335 |
| SWP640B | 640 | 1250 | 630 | ≤10 | 230 | 2780 | 575 | 385 | 480 | sixty | fifteen | 100×60 | 30 | 385 | 18-38 | a hundred and seventy.21 | 27.twenty |
♦Product Present
♦Other Items Record
| Transmission Machinery Components Identify |
Design |
| Universal Coupling | WS,WSD,WSP |
| Cardan Shaft | SWC,SWP,SWZ |
| Tooth Coupling | CL,CLZ,GCLD,GIICL, GICL,NGCL,GGCL,GCLK |
| Disc Coupling | JMI,JMIJ,JMII,JMIIJ |
| High Flexible Coupling | LM |
| Chain Coupling | GL |
| Jaw Coupling | LT |
| Grid Coupling | JS |
♦Our Company
Our firm provides distinct kinds of items. Substantial quality and affordable value. We adhere to the principle of “top quality initial, services initial, constant enhancement and innovation to fulfill the buyers” for the administration and “zero defect, zero complaints” as the good quality aim. To best our support, we give the goods with good top quality at the sensible cost.
Welcome to customize items from our factory and please offer your design and style drawings or speak to us if you require other specifications.
♦Our Providers
1.Design Solutions
Our layout group has expertise in cardan shaft relating to merchandise style and growth. If you have any needs for your new item or wish to make further enhancements, we are right here to supply our assistance.
2.Merchandise Services
raw components → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping
three.Samples Process
We could build the sample in accordance to your necessity and amend the sample consistently to satisfy your want.
4.Investigation & Development
We typically analysis the new requirements of the industry and produce the new design when there is new automobiles in the market place.
five.High quality Control
Every step ought to be particular examination by Professional Employees in accordance to the standard of ISO9001 and TS16949.
♦FAQ
Q 1: Are you trading company or producer?
A: We are a professional maker specializing in manufacturing
numerous collection of couplings.
Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with tailored artworks of PDF or AI structure.
Q 3:How extended is your shipping and delivery time?
Typically it is 20-30 days if the products are not in inventory. It is in accordance to quantity.
Q 4: Do you give samples ? Is it totally free or extra ?
Indeed, we could offer you the sample but not for free of charge.In fact we have a very excellent value basic principle, when you make the bulk get then value of sample will be deducted.
Q 5: How extended is your warranty?
A: Our Warranty is twelve thirty day period under standard circumstance.
Q 6: What is the MOQ?
A:Typically our MOQ is 1pcs.
Q 7: Do you have inspection methods for coupling ?
A:100% self-inspection just before packing.
Q 8: Can I have a visit to your manufacturing unit ahead of the buy?
A: Sure,welcome to pay a visit to our manufacturing facility.
Q 9: What is your payment?
A:1) T/T. 2) L/C
♦Get in touch with Us
Internet: huadingcoupling
Include: No.1 HangZhou Street,Chengnan park,HangZhou Metropolis,ZheJiang Province,China
|
US $74.85-149,700 / Piece | |
1 Piece (Min. Order) |
###
| Standard Or Nonstandard: | Standard |
|---|---|
| Shaft Hole: | as Your Requirement |
| Torque: | as Your Requirement |
| Bore Diameter: | as Your Requirement |
| Speed: | as Your Requirement |
| Structure: | Flexible |
###
| Customization: |
Available
|
|---|
###
| Type | Tactical diameter D mm |
Nominal torque Tn kN·m |
Fatique torque Tf kN·m |
Axis angle β (°) |
Stretch length S mm |
Size(mm) | Rotary inertia kg·m2 |
Mass kg |
|||||||||
| L | D1 js11 |
D2 H7 |
D3 | E | E1 | B×h | h1 | L1 | n-d | ||||||||
| SWP160B | 160 | 16 | 8 | ≤10 | 50 | 585 | 140 | 95 | 114 | 15 | 4 | 20×12 | 6 | 85 | 6-13 | 0.14 | 44 |
| SWP180B | 180 | 20 | 10 | ≤10 | 60 | 640 | 155 | 105 | 121 | 15 | 4 | 24×14 | 7 | 95 | 6-15 | 0.23 | 54 |
| SWP200B | 200 | 31.5 | 16 | ≤10 | 70 | 730 | 175 | 125 | 17 | 17 | 5 | 28×16 | 8 | 110 | 8-15 | 0.36 | 75 |
| SWP225B | 225 | 40 | 20 | ≤10 | 76 | 830 | 196 | 135 | 152 | 20 | 5 | 32×18 | 9 | 130 | 8-17 | 0.61 | 108 |
| SWP250B | 250 | 63 | 31.5 | ≤10 | 80 | 860 | 218 | 150 | 168 | 25 | 5 | 40×25 | 12.5 | 135 | 8-19 | 0.98 | 138 |
| SWP285B | 285 | 90 | 45 | ≤10 | 100 | 1000 | 245 | 170 | 194 | 27 | 7 | 40×30 | 15 | 150 | 8-21 | 2.12 | 229 |
| SWP315B | 315 | 140 | 63 | ≤10 | 110 | 1120 | 280 | 185 | 219 | 32 | 7 | 40×30 | 15 | 170 | 10-23 | 3.80 | 309 |
| SWP350B | 350 | 180 | 90 | ≤10 | 120 | 1230 | 310 | 210 | 245 | 35 | 8 | 50×32 | 16 | 185 | 10-23 | 6.60 | 408 |
| SWP390B | 390 | 250 | 112 | ≤10 | 120 | 1310 | 345 | 235 | 273 | 40 | 8 | 70×36 | 18 | 205 | 10-25 | 10.50 | 539 |
| SWP435B | 435 | 355 | 160 | ≤10 | 150 | 1555 | 385 | 255 | 299 | 42 | 10 | 80×40 | 20 | 235 | 16-28 | 22.39 | 903 |
| SWP480B | 480 | 450 | 224 | ≤10 | 170 | 17440 | 425 | 275 | 351 | 47 | 12 | 90×45 | 22.5 | 265 | 16-31 | 38.21 | 1243 |
| SWP550B | 550 | 710 | 315 | ≤10 | 190 | 1905 | 492 | 320 | 402 | 50 | 12 | 100×45 | 22.5 | 290 | 16-31 | 61.00 | 1643 |
| SWP600B | 600 | 1000 | 500 | ≤10 | 210 | 2600 | 544 | 380 | 450 | 55 | 15 | 90×55 | 27.5 | 360 | 22-34 | 99.13 | 2335 |
| SWP640B | 640 | 1250 | 630 | ≤10 | 230 | 2780 | 575 | 385 | 480 | 60 | 15 | 100×60 | 30 | 385 | 18-38 | 170.21 | 27.20 |
###
| Transmission Machinery Parts Name |
Model |
| Universal Coupling | WS,WSD,WSP |
| Cardan Shaft | SWC,SWP,SWZ |
| Tooth Coupling | CL,CLZ,GCLD,GIICL, GICL,NGCL,GGCL,GCLK |
| Disc Coupling | JMI,JMIJ,JMII,JMIIJ |
| High Flexible Coupling | LM |
| Chain Coupling | GL |
| Jaw Coupling | LT |
| Grid Coupling | JS |
|
US $74.85-149,700 / Piece | |
1 Piece (Min. Order) |
###
| Standard Or Nonstandard: | Standard |
|---|---|
| Shaft Hole: | as Your Requirement |
| Torque: | as Your Requirement |
| Bore Diameter: | as Your Requirement |
| Speed: | as Your Requirement |
| Structure: | Flexible |
###
| Customization: |
Available
|
|---|
###
| Type | Tactical diameter D mm |
Nominal torque Tn kN·m |
Fatique torque Tf kN·m |
Axis angle β (°) |
Stretch length S mm |
Size(mm) | Rotary inertia kg·m2 |
Mass kg |
|||||||||
| L | D1 js11 |
D2 H7 |
D3 | E | E1 | B×h | h1 | L1 | n-d | ||||||||
| SWP160B | 160 | 16 | 8 | ≤10 | 50 | 585 | 140 | 95 | 114 | 15 | 4 | 20×12 | 6 | 85 | 6-13 | 0.14 | 44 |
| SWP180B | 180 | 20 | 10 | ≤10 | 60 | 640 | 155 | 105 | 121 | 15 | 4 | 24×14 | 7 | 95 | 6-15 | 0.23 | 54 |
| SWP200B | 200 | 31.5 | 16 | ≤10 | 70 | 730 | 175 | 125 | 17 | 17 | 5 | 28×16 | 8 | 110 | 8-15 | 0.36 | 75 |
| SWP225B | 225 | 40 | 20 | ≤10 | 76 | 830 | 196 | 135 | 152 | 20 | 5 | 32×18 | 9 | 130 | 8-17 | 0.61 | 108 |
| SWP250B | 250 | 63 | 31.5 | ≤10 | 80 | 860 | 218 | 150 | 168 | 25 | 5 | 40×25 | 12.5 | 135 | 8-19 | 0.98 | 138 |
| SWP285B | 285 | 90 | 45 | ≤10 | 100 | 1000 | 245 | 170 | 194 | 27 | 7 | 40×30 | 15 | 150 | 8-21 | 2.12 | 229 |
| SWP315B | 315 | 140 | 63 | ≤10 | 110 | 1120 | 280 | 185 | 219 | 32 | 7 | 40×30 | 15 | 170 | 10-23 | 3.80 | 309 |
| SWP350B | 350 | 180 | 90 | ≤10 | 120 | 1230 | 310 | 210 | 245 | 35 | 8 | 50×32 | 16 | 185 | 10-23 | 6.60 | 408 |
| SWP390B | 390 | 250 | 112 | ≤10 | 120 | 1310 | 345 | 235 | 273 | 40 | 8 | 70×36 | 18 | 205 | 10-25 | 10.50 | 539 |
| SWP435B | 435 | 355 | 160 | ≤10 | 150 | 1555 | 385 | 255 | 299 | 42 | 10 | 80×40 | 20 | 235 | 16-28 | 22.39 | 903 |
| SWP480B | 480 | 450 | 224 | ≤10 | 170 | 17440 | 425 | 275 | 351 | 47 | 12 | 90×45 | 22.5 | 265 | 16-31 | 38.21 | 1243 |
| SWP550B | 550 | 710 | 315 | ≤10 | 190 | 1905 | 492 | 320 | 402 | 50 | 12 | 100×45 | 22.5 | 290 | 16-31 | 61.00 | 1643 |
| SWP600B | 600 | 1000 | 500 | ≤10 | 210 | 2600 | 544 | 380 | 450 | 55 | 15 | 90×55 | 27.5 | 360 | 22-34 | 99.13 | 2335 |
| SWP640B | 640 | 1250 | 630 | ≤10 | 230 | 2780 | 575 | 385 | 480 | 60 | 15 | 100×60 | 30 | 385 | 18-38 | 170.21 | 27.20 |
###
| Transmission Machinery Parts Name |
Model |
| Universal Coupling | WS,WSD,WSP |
| Cardan Shaft | SWC,SWP,SWZ |
| Tooth Coupling | CL,CLZ,GCLD,GIICL, GICL,NGCL,GGCL,GCLK |
| Disc Coupling | JMI,JMIJ,JMII,JMIIJ |
| High Flexible Coupling | LM |
| Chain Coupling | GL |
| Jaw Coupling | LT |
| Grid Coupling | JS |
Safety Precautions For a PTO Shaft
When you are working around PTOs, be sure to observe several safety precautions. These include removing the shield, keeping a safe distance from the machine, and avoiding entanglement. Entanglement is a serious injury that can even lead to death. Workers who are near the machine should always maintain a safe distance, especially if the speed of the machine is fast enough to entangle clothing. The speed of the PTO is usually 540 to 1,000 revolutions per minute, and the speed is enough to cause injury in a split second.
Safety precautions
One of the most important safety precautions for a PTO shaft is to make sure that it is properly guarded at all times. An unguarded PTO shaft can entanglement a worker, cause an injury, or even cause death. Operator awareness is key in preventing this hazard. Among other things, workers should not make repairs while the PTO is in use or wear loose or frayed clothing when working near the PTO. Likewise, they should read and follow instructions provided with their tractor and implement. Finally, they should use PTO shafts only for their intended purpose.
Another important safety precaution is to wear a protective gear such as a helmet and gloves before operating a PTO shaft. This type of equipment can be extremely dangerous because of its speed. A PTO shaft that is rotating at 540 rpm can travel two metres in less than a second. Damaged shielding is a common cause of entanglement, so it is important to check your machinery for damage before operating it.
When operating a tractor, PTOs should be kept clear of loose clothing. Loose clothing can easily catch on a rotating PTO shaft. Long hair or jewelry can also become entangled in a PTO shaft. It is also important to remember to secure the PTO shaft guard when the tractor is not in use. Also, never engage a PTO when the engine is off.
Types of pto shafts
PTO shafts are used in tractors and other equipment to secure the secondary gear in the tractor. They are available in different styles and sizes. These shafts are designed to withstand pressure, impacts, and tension. They may also include a shear pin and slip clutch. Before buying a new PTO shaft, make sure to check its measurements.
There are two types of PTO shafts available in an Agric rototiller. The first one has a slip clutch and the other has a shear pin safety device. In order to identify the type of PTO shaft used in a particular tractor, it is important to understand what it is used for.
There are two types of PTO shafts: the external and internal. The latter is used for larger machines, such as a lawnmower. The former is suitable for agricultural applications and is the preferred type for large tractors. The former is suitable for plowing, mowing, and shredding.
Transmission PTO shafts are the oldest type of PTO. They are connected to the tractor’s transmission. When a tractor is in gear, it stops the PTO shaft. However, when it’s not, it’s ineffective and can pose serious problems, such as when mowing. This type of PTO can also cause an overrun clutch to prevent the PTO shaft from working properly.
Reaction time
It’s important to know your reaction time when working around a power take-off (PTO) shaft. This part of the machine rotates at approximately 540 revolutions per minute and can pull in seven feet per second. Reaction time can be affected by age, physical condition, medications, lack of sleep, and stress. If you’re working around a PTO, be sure to remove any loose jewelry or other items that might interfere with your reaction time.
PTO accidents can be caused by several factors. The operator, the machine, and the environment all play a role. The operator’s physical and mental condition can also contribute to unsafe actions. For example, young operators may lack the knowledge and experience to recognize hazards. Older workers may also have slower reaction times, which can make it difficult to react quickly to slippery work areas.
Reaction time is measured as the time between a stimulus and the response. It does not include the time required to move the hand. Reaction time is a critical factor in sports, where athletes need to be quick to respond to the moves of their opponents. A good reaction time is necessary to score points.
A demonstration of the speed of a PTO shaft is a great tool to demonstrate how dangerous this part of a machine can be. To demonstrate the speed, use a 7-foot sash cord tied to a sliding collar universal joint. Select a 540-rpm PTO shaft, and a three-inch diameter shield. In one second, the rotating shaft makes nine revolutions and travels 7.1 feet. However, a cordless drill does not rotate at full speed and will take at least two seconds to wrap around the string.
Standardization
The standardization of PTO shafts in tractors is a major project. The EU Machinery Directive requires the protection of operators from rotating parts, such as the PTO. This is especially important when parts are accessible, as clothing can easily be wrapped around them, resulting in an accident. To prevent such accidents, manufacturers have begun to install non-rotating guards over the PTO drive shaft. These guards comply with the current EU good practice.
The European Standard EN 12965:2003+A2:2009 specifies the safety requirements for PTO drive shafts and their guards. It also specifies safe working practices for these components. The standard was approved by CEN on 16 September 2019. It is important to follow these regulations to ensure safe operation.
In the 1980s, a movement began among agricultural engineers to standardize the PTO shaft. The movement began because the different types of PTO shafts had not been interchangeable. A common example is the Deutz-Fendt shaft, which had become a standard for tractors.
As the power for PTO drives comes from the gearbox, the counter shaft acts as the PTO outlet. Standardization of PTO speeds makes it easier for manufacturers to design equipment to meet a specified speed. For example, a thresher is expected to run at a specific peripheral velocity of the threshing cylinder, which is a function of standard PTO speeds. This also allows designers to plan pulley arrangements with the standard PTO speed in mind.
Safety chains
The PTO shaft is an integral part of a tractor or implement, so it’s essential to secure it with safety chains. These chains are welded to both ends of the shaft and serve as backup connections between the tractor and trailer coupling point. There are several types of chains available, from domestic to metric, to meet your specific needs.
Because of the high speeds of PTO shafts, it’s crucial to protect these parts from being tangled. A single fall of a PTO shaft can cause serious injury or even death. In such an unfortunate situation, safety chains can prevent such injuries. PTO shafts are also extremely dangerous because the components can become hot while they are operating.
In addition to safety chains, operators must also be aware of the hazards that can occur when working near a PTO shaft. Unsafe behaviors, such as performing repairs while operating a machine, or wearing frayed clothing can lead to serious injury or death. In addition, all users should follow the instructions on the tractor or implement they’re using. It’s also essential to use a PTO shaft for its intended purpose.
In addition to safety chains, farmers should also ensure that the PTO drive shaft is securely attached to the tractor or implement. A broken or damaged PTO guard can be just as dangerous as an unprotected shaft. In addition, a poorly fitting PTO guard may provide a false sense of security. For this reason, it’s important to use protective clothing when operating a tractor or implement powered by a PTO.
Shield
The CZPT-Co universal fit PTO shaft shield is a simple and easy to use shield that has a patented lever release. The shield comes in two sizes, the smaller diameter shield is for shafts with a diameter of 1 5/16″ to 2 1/8″ and the larger diameter shield fits shafts of 2″ to 3 1/8″. Each shield is pre-installed with an assortment of bearings. The shield’s length is measured from the end of the yoke bearing groove to the other end.
If you’ve ever tried to work on a PTO shaft, you know that it can be frustrating. A PTO shaft shield is a safety device that covers the shaft and prevents it from rotating. These shields are also designed to be easy to connect and remove. The CZPT safety clip makes it easy to connect or disconnect the shield, and locks into place to prevent it from rotating with the inner driveshaft. The CZPT material used in RPM Transmissions driveline safety shields is strong and rigid.
Another improvement of this PTO shaft shield is the bracket that supports the two-piece PTO shaft and outer shield. The bracket is shown in FIG. 2 as an angled front view. FIG. 7 is a side elevation view of the bracket mounted to the machine tongue.
editor by czh 2022-12-20
Best factory made in China – replacement parts – PTO shaft manufacturer & factory Plum-Shaped drive shaft kancil 660 Flexible Coupling Used for Connecting Pump and Motor with ce certificate top quality low price
We – EPG Group the largest agricultural gearbox and pto manufacturing unit in China with 5 different branches. For far more details: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
adams front driveshaft jk Underneath atwoods pto shaft the kubota pto shaft broke direction 2005 cadillac cts travel shaft of 55 inch driveshaft managerial drive shafts suppliers sense pto shaft collection dimensions of northern resource pto shaft “Serving 2001 ford f150 generate shaft agriculture, pto shaft caught in tractor scoring a success by way of good quality of products and honesty in enterprise”, our merchandise have been reliable by consumers and have obtained a larger share of industry. EPG Machinery is located in XiHu Area HangZhou Zhejiang ,China. It is 30km from our factory to HangZhou intercontinental airport. Industrial Adaptable Jaw Coupling For Transmission
1&period of time The couplings are employed for common goal&period of time They supply a range of hub and factor assortment to meet distinct demands&period of time
2&period of time They allow rapid and effortless assembly by indicates of taper bush&interval They are presented in each pilot bore and finished bore&period of time
three&time period Tailored requirement is offered&period of time
The rated torque T and the highest torque Tmax of the coupling
Solution Show
| Specification |
Rated torque T &lsqbNm&rbrack |
Max&interval torque Tmax&lsqbNm&rbrack |
||
| NBR elastomer |
Polyurethane elastomer | NBR elastomer | Polyurethane elastomer | |
| 240 | one thousand | a thousand | 3000 | 7000 |
| three hundred | 2000 | 2000 | 6000 | 17500 |
| 350 | 3400 | ten thousand | 15710 | 31500 |
| 400 | 5050 | 16000 | 15200 | 48000 |
| 450 | 6850 | 21000 | 20500 | 62000 |
| five hundred | 10300 | 35000 | 30900 | 110000 |
| 550 | 13200 | 45000 | 39600 | 135000 |
| 600 | 16500 | 55000 | 49500 | 163000 |
| 650 | 19700 | 65000 | 59000 | 176000 |
| seven-hundred | 26700 | 90000 | 80000 | 275000 |
| 800 | 39000 | 120000 | 118000 | 380000 |
| 900 | 54000 | 180000 | 162000 | 550000 |
StHangZhourd&colonDIN&comma CEMA&comma ASTM&comma SHA and and so forth&time period
Our company materials various types of merchandise&period Large quality and realistic value&period of time We stick to the basic principle of “quality first&comma support initial&comma constant improvement and innovation to meet up with the clients” for the administration and “zero defect&comma zero grievances” as the quality aim&time period To EPT our service&comma we supply the items with good high quality at the reasonable cost&period of time
Products Record
| Transmission Machinery Parts Name | Model |
| common coupling | WS WSD WSP |
| cardan shaft | SWC SWP SWZ |
| tooth coupling | CL CLZ GCLD GIICL GICL NGCL GGCL PGCLK |
| disc coupling | JMI JMIJ JMII JMIIJ |
| higher versatile coupling | LM |
| chain coupling | GL |
| jaw coupling | LT |
| grid coupling | JS |
Our Providers
24 hours on the internet support
Enquiry will be replied in 2 hrs
Manufacturing facility Address&colon
No&interval eleven&comma HangZhou Road&comma ChengNan Industrial Park&comma HangZhou&comma HangZhou&comma ZheJiang &comma China
FAQ
one&period of time Are u a manufacturer&quest
We are a expert manufacturer specializing in production cardan shaft and various series of couplings&period of time We source couplings for the wholesalers and dealers from different countries&period
2&period Can you do OEM&quest
Yes&comma we can&interval We can do OEM & ODM for all the clients with customized artworks of PDF or AI format&period of time
3&interval How does your factory do concerning good quality control&quest
Top quality is priority&excl We always attach fantastic relevance to quality managing from the very beginning to the very end&colon
one&rpar To begin with&comma we have specialized QC section to handle the quality&comma and we also take the third formal government to inspect the cargoes ahead of delivery&period
two&rpar Next&comma we have all comprehensive information for nonconformity goods&comma then we will make summary according to these documents&comma stay away from it occur once more&period
three&rpar Thirdly&comma We do notice the relev EPT codes of conduct & legal guidelines from government in setting&comma human right elements like no children labor&comma no prisoner labor and so on&period of time
4&period of time How can I get samples&quest
We are appreciated that new customers spend for the express charge for samples and this demand will be deducted once orders are unveiled&period of time
Welcome to personalize merchandise from our factory and p EPT send us far more detai EPT about your acquiring&interval
Thank you for your time and interest&interval
Best price made in China – replacement parts – PTO shaft manufacturer & factory Customize drive shaft naza ria Flexible Coupling for Heavy Machine with ce certificate top quality low price
We – EPG Group the biggest agricultural gearbox and pto manufacturing facility in China with 5 diverse branches. For more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
john deere b pto shaft removal Primary push shaft u joint puller products pto overrun clutch removal incorporate: king kutter pto yoke manure bush hog 2615 areas diagram spreading toyota avensis push shaft truck, mesa drive shaft potato refurbished generate shafts planting/harvesting shear bolts for tractor pto machine, ford 9n pto shaft disc plough, disc harrow, grass Mower/slasher, corn and wheat thershers, seeder, mouldboard plow, deep subsoiler devices, rotary tiller, rear blade, fertilizer spreader, mix rice harvester, corn thresher, farm trailer, ridger, trencher, stubble cleaner, earth auger, cultivator and its add-ons: Plow disc blades, harrowing movie, plough suggestion and share, cultivator tine, casting parts and many others. Beneath the direction of managerial sense of “Serving agriculture, scoring a good results by way of good quality of merchandise and honesty in enterprise”, our merchandise have been trusted by consumers and have obtained a larger share of market place.
Mobile: +86~13083988828escopic flange extended cardan shaft Coupling(SWP-E)
SWP split bearing housing cross shaft universal coupling is ideal for machinery,lifting and transportation equipment and other hefty machinery. Connecting two axes whose axes are not on the same straight line. The rotation diameter is one hundred sixty-640mm. The nominal torque Tn=16-1250Kn·m,axis angle A-F kind β≤25°.G type≤5°.
·SWP E Type Cardan Shaft Standard Parameter And Primary Dimension(JB/T3241-1991)
| Type | Tactical diameter D mm |
Nominal torque Tn kN·m |
Fatique torque Tf kN·m |
Axis angle β (°) |
Measurement(mm) | Rotary inertia kg·mtwo |
Mass kg |
|||||||||||
| Lmin | Done js11 |
Dtwo H7 |
Dthree | E | Eone | B×h | hone | L1 | n-d | Lmin | Improve 100 |
Lmin | Improve one hundred |
|||||
| SWP160E | one hundred sixty | sixteen | eight | ≤10 | 715 | one hundred forty | ninety five | 114 | 15 | four | 20×12 | 6 | eighty five | 6-13 | .15 | .0056 | 35 | two.one |
| SWP180E | a hundred and eighty | twenty | ten | ≤10 | 800 | a hundred and fifty five | one zero five | 121 | fifteen | four | 24×14 | 7 | ninety five | six-fifteen | .25 | .0072 | forty seven | 2.three |
| SWP200E | two hundred | 31.5 | sixteen | ≤10 | 880 | 175 | a hundred twenty five | 127 | 17 | 5 | 28×16 | 8 | one hundred ten | 8-fifteen | .42 | .0114 | sixty seven | three.4 |
| SWP225E | 225 | forty | twenty | ≤10 | 1000 | 196 | one hundred thirty five | 152 | 20 | 5 | 32×18 | 9 | a hundred thirty | eight-seventeen | .75 | .5710 | 94 | 6.six |
| SWP250E | 250 | sixty three | 31.5 | ≤10 | 1055 | 218 | 150 | 168 | 25 | 5 | 40×25 | twelve.five | one hundred thirty five | eight-19 | 1.26 | .0407 | one hundred forty | seven.3 |
| SWP285E | 285 | ninety | 45 | ≤10 | 1210 | 245 | 170 | 194 | 27 | 7 | 40×30 | 15 | one hundred fifty | eight-21 | two.sixty seven | .0702 | 206 | nine.4 |
| SWP315E | 315 | 140 | 63 | ≤10 | 1345 | 280 | 185 | 219 | 32 | 7 | 40×30 | fifteen | a hundred and seventy | 10-23 | four.38 | .1144 | 271 | 12. |
| SWP350E | 350 | a hundred and eighty | 90 | ≤10 | 1480 | 310 | 210 | 245 | 35 | eight | 50×32 | sixteen | 185 | 10-23 | 7.42 | .1663 | 355 | 13.6 |
| SWP390E | 390 | 250 | 112 | ≤10 | 1623 | 345 | 235 | 273 | forty | 8 | 70×36 | eighteen | 205 | 10-25 | thirteen.27 | .2695 | 501 | 18. |
| SWP435E | 435 | 355 | 160 | ≤10 | 1860 | 385 | 255 | 299 | forty two | 10 | 80×40 | 20 | 235 | 16-28 | 24.62 | .3645 | 825 | twenty. |
| SWP480E | 480 | 450 | 224 | ≤10 | 2122 | 425 | 275 | 351 | forty seven | 12 | 90×45 | 22.five | 265 | 16-31 | 42.81 | .7571 | 1144 | 28. |
| SWP550E | 550 | 710 | 315 | ≤10 | 2338 | 492 | 320 | 402 | fifty | 12 | 100×45 | 22.five | 290 | sixteen-31 | sixty eight.eighty one | 1.1842 | 1589 | 35.seven |
| SWP600E | 600 | one thousand | 500 | ≤10 | 2930 | 544 | 380 | 450 | fifty five | fifteen | 90×55 | 27.5 | 360 | 22-34 | a hundred and ten.sixty | 1.7159 | 2243 | forty.five |
| SWP640E | 640 | 1250 | 630 | ≤10 | 3170 | 575 | 385 | 480 | 60 | 15 | 100×60 | 30 | 385 | eighteen-38 | 177.77 | 2.3080 | 3140 | 48.3 |
Our business materials different varieties of items. Higher good quality and realistic value. We adhere to the principle of “good quality first, service very first, continuous improvement and innovation to meet up with the customers” for the administration and “zero defect, zero complaints” as the high quality aim. To EPT our provider, we offer the merchandise with good high quality at the affordable price.
Our Services
24 several hours online service
Enquiry will be replied in 2 hrs
Manufacturing facility Address:
No. eleven HangZhou Road, ChengNan Industrial Park, HangZhou Town, HangZhou, ZheJiang , China
FAQ
one. Are u a manufacturer?
We are a professional manufacturer specializing in manufacturing cardan shafts and various series of couplings. We supply couplings for the wholesalers and dealers from different countries.
2. Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with custom-made artworks of PDF or AI structure.
three. How does your manufacturing unit do concerning good quality manage?
Top quality is precedence! We always attach great significance to top quality controlling from the quite starting to the extremely stop:
one) To begin with, we have specialized QC section to control the good quality, and we also settle for the 3rd formal authorities to examine the cargoes ahead of supply.
two) Secondly, we have all comprehensive data for nonconformity goods, then we will make summary in accordance to these information, avoid it come about once again.
3) Thirdly, We do observe the relev EPT codes of perform & rules from authorities in surroundings, human proper aspects like no kids labor, no prisoner labor and so on.
4. How can I get samples?
We are appreciated that new customers spend for the convey payment for samples and this cost will be deducted once orders are released.
Welcome to customise goods from our manufacturing facility and remember to give your design drawings or contact us if you want other requirements.
Many thanks.
Hot shop made in China – replacement parts – in Nantes France Sale Flexible Rubber Gear Coupling 16196467 Components with top quality
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Solution description:
Coupling
OMGType Rubber Factor For Adaptable Pump Shaft Coupling are all sophisticated shaft link units. They are widely used for push shaft conclude link of huge-scale tools such as steel rolling, lifting, forging and oil and EPT sorts of mechanical products.
Torque: 22.4~2500NM
Dress in: < 0.05cm3 / 1.61km
Merchandise hardness: SHA98°
Use of temperature: -forty~100ºC
EPT very hot sale P/N
| rubber versatile coupling | 290657100 | GA132-a hundred and sixty |
| rubber versatile coupling | 1614873800 | GA132-a hundred and sixty |
| rubber flexible coupling | 1614873900 | GA160 |
| rubber versatile coupling | 1615436200/295711600 | |
| rubber adaptable coupling | 295711701 | |
| rubber adaptable coupling | 295711501 | |
| rubber flexible coupling | 290657100 | |
| rubber adaptable coupling | GR65 | 100HP |
| rubber flexible coupling | 100HP | |
| rubber versatile coupling | GR90 | 200HP |
| rubber adaptable coupling | HRC180 | EPT variety |
| rubber versatile coupling | HRC230 | EPT sort |
| rubber versatile coupling | 148(8829003-322) | 100HP |
| rubber flexible coupling | 128,(8829003-326/312) | 75HP |
| rubber adaptable coupling | 168 | |
| rubber flexible coupling | 45672 | 40HP |
| rubber versatile coupling | 250004-641 | 50HP |
| rubber versatile coupling | E20 | |
| rubber versatile coupling | E30 | |
| rubber adaptable coupling | E40 | |
| rubber adaptable coupling | E50 | |
| rubber versatile coupling | E60 | |
| rubber flexible coupling | E70 | |
| rubber flexible coupling | GR100 | |
| rubber versatile coupling | GR110 | |
| rubber adaptable coupling | 202/SA-120W | |
| rubber adaptable coupling | 227/SA-250W | |
| rubber adaptable coupling | GR48 | |
| rubber versatile coupling | 250018-551 | |
| rubber flexible coupling | 0571 99 | |
Relevant Products
| Air Compressor Day-to-day Consumables | Air/oil/pipeline Filter,Oil Separator, Lubricant. |
| Air Compressor Electrial Components | Pressure/temprature sensor, Differential Pressure Sensor,strain/temp. change. |
| Air Compressor Preventive Servicing Package | Min. stress Kit, Oil stop Package,Verify Valve Package, Unloading Valve Kit, Security valve package and so on. |
| Aircompressor Motor | MainMotor, Fan Motor. |
| Air Compressor Spare Parts | hose,o-ring, oil stage guage, shaft, equipment wheel,display, diaphragm,couplings. |
| Air Compressor rotor | for Atlas Copco, Ingersoll Rand, Sullair,CompAir, Fusheng,Quincy. |
| Air Compressor Cooler | Following Cooler, Oil Cooler. |
Our providers:
1.24 hrs a day, 7 days a week
2.1-quit buying
3.Low-cost, fa EPT and effective
4.satisfactory shares
5.seventeen many years ordeals
six. Critically high quality management
7.Superb strategy
No make a difference what you want, ju EPT ship me your element amount , favorable cost will be quoted immedia tel: +86~thirteen 0571 88828y.
our objective is to “offer the be EPT goods and providers to our customers”
one.Substantial Good quality With Favorable Value
We make certain that the components we offer are satisfied your wants with high high quality .
Business Data
Hongkong EPT business Itd-its compressor manufacturing facility covers an area of far more than one hundred fifty acres,situated in Zone B,Xihu (We EPT Lake) Dis.a Industrial Park,HangZhou Metropolis,ZheJiang Province which specializing in investigation&improvement and production of air compressors.The product has achieved the intercontinental level and income in Southea EPT Asia&North American market with excellent cooperation and complex strengths of German associates.
We’re a Hello-Tech firm focus in study, growth, manufacture and distribution of air compressor and spare elements. With our rich experience, job technologyand arduous top quality manage, our merchandise are widely employed in air compressor field with great opinions and constant orders from much more than 2,000 clients in domestic and oversea marketplace.We can remedy any specialized difficulties you may encounter with your air compressor and supply numerous varieties of air compressor parts for you.
The brand name EPT is intention to make high performance screw air compressor to preserve the electricity,save the vitality and help save your costGreen electrical power make human existence a lot more harmonious and lower-carbon.
YOU Could LIKE
Services kits:unloading valve kits, Bare minimum pressure valve kit,
End oil valve package, examine valve kit, thermostat valve package and a lot more
Valve assembly:air intake valve, thermostat valve, solenoid valve, bare minimum strain valve package, blow off valve, drain valve and much more
Rubber parts: hose, coupling, elbow, anti-vibration pad, housing, belt
Sensor: temperature sensor, pressure sensor, oil level sensor
EPT parts: gear wheel, controller, temperature switch, pressure swap, cleaning agent
Packaging&Transport
packing: EPT packing & authentic Packing & exterior packing
transport: 1-3 operating days
Blister bag / Bubble bag/ Kraft paper /Acrylic box or as customer’s ask for.
Outside the house deal :
Carton wooden box and woven bags or as customer’s request.
Payment conditions :
L/C, T/T, Paypal, Western union, Trade assurance purchase and etc.
Transportation and transport :
DHL, TNT, UPS, EMS, FEDEX and and many others
Certification
FAQ
Q1: Are you manufacturing unit or trade company?
A1:We are manufacturing unit.
Q2: What the specifically handle of your factory?
A2: Our head office is positioned in 2F Xingshun Technology Park, Chongtou group,Chang’an, HangZhou City ZheJiang Province,china.
And our factory is positioned in Region B,Business Zone,Lian hua County, HangZhou Metropolis, ZheJiang Porvince, China. (That is our boss’s hometown)
Q3: Warranty terms of your equipment?
A3: One calendar year guarantee for the machine and technological help in accordance to your demands.
This fall: Will you offer some spare parts of the machines?
A4: Yes, of training course. we can offer all spare parts for the devices
Q5: How extended will you take to arrange production?
A5:380V 50HZ we can supply the goods inside 10 days. EPT electricity or EPT colour we will shipping and delivery within 14-18days
Q6: Can you settle for EPT orders?
A6: Yes, with professional design team, OEM orders are highly welcome.
Get in touch with US
Hongkong EPT Industry Ltd
Place of work include:Space 1702 Vank heart,Changan,HangZhoug,China.
Tel:+86-769-81583101
Phone/+86~13083988828 13858117778925721063
Web site: internet
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 various branches. For more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of authentic equipment manufacturer’s (OEM) component numbers or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating merchandise use and compatibility. Our business and the listed replacement components contained herein are not sponsored, approved, or created by the OEM.
Flexible made in China – replacement parts – in Krakow Poland Shaft Chain Pump Coupling Kc 6018 with ce certificate top quality low price
We – EPG Team the bigge EPT Chain and agricultural gearbox manufacturing unit in China with 5 diverse branches. For much more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Item Description
The roller chain coupling is a flexible coupling of amazingly basic building. It is composed of a combination of a single coupling chain and a pair of coupling sprockets. Versatile and powerful, the roller chain coupling is suited for a wide selection of coupling applications.
Roller chain coupling can utilized for the setting which with higher temperature, damp and dirty problems. It is not suited for the situation which is in higher velocity and with powerful influence load. Roller chain coupling must working with outstanding lubrication and safety protect problems.
The widespread chain coupling involves double roller chain coupling, one row roller chain coupling, tooth condition chain coupling, nylon chain coupling. Its scale is compact and its bodyweight is mild. But roller chain coupling will not have high requirement to set up precision.
Generally talking, it is typically in extended service life. Manufacturing line gear for different types of frozen food and dehydrated veggies should transportation by stainless metal chain. Roller chains are extensively applied to household, industrial and agricultural equipment, involves conveyor, drawing machine, printing device, vehicle, bike and bicycle.
Major Characteristics
one.Straightforward construction,straightforward assembly and disassembly.
two.Light-weight bodyweight,and long provider daily life.
three.Have a certain capacity to compensate for installation less precision.
four.Suitable for substantial temperature,soaked and dusty industrial environment.
five.Can not for higher velocity,violent vibration.
Techncial Day
| KASIN No. | Chain Kind | d | L | G | S | D | H | C | Excess weight/Kg | A | B | Casing Excess weight/Kg |
| 3012 | 06B-2 × 12 | twelve~sixteen | sixty four.8 | 29.eight | 5.two | 35 | 45 | 10.2 | .31 | sixty nine | 63 | .22 |
| 4012 | forty-2 × 12 | twelve~22 | seventy nine.four | 36 | 7.4 | 35 | 62 | fourteen.four | .seventy three | 77 | seventy two | .three |
| 4014 | forty-2 × 14 | twelve~28 | 79.4 | 36 | 7.four | 43 | 69 | fourteen.four | 1.twelve | 84 | seventy five | .31 |
| 4016 | forty-2 × 16 | fourteen~32 | 87.4 | forty | seven.four | 50 | 77 | fourteen.four | one.5 | ninety two | seventy two | .35 |
| 5014 | fifty-2 × 14 | fifteen~35 | ninety nine.seven | forty five | nine.7 | 55 | 86 | 18.1 | two.15 | a hundred and one | 85 | .forty seven |
| 5016 | fifty-2 × 16 | sixteen~40 | 99.seven | forty five | nine.seven | sixty two | ninety three | 18.one | two.75 | one hundred ten | 87 | .five |
| 5018 | 50-2 × 18 | 16~forty five | ninety nine.7 | 45 | nine.7 | 70 | 106 | 18.1 | three.six | 122 | 85 | .6 |
| 6018 | 60-2 × 18 | 20~56 | 123.5 | 56 | 11.5 | 85 | 127 | 22.8 | 6.55 | 147 | 105 | 1.2 |
| 6571 | 60-2 × 20 | twenty~60 | 123.five | fifty six | eleven.5 | a hundred | 139 | 22.8 | eight.38 | 158 | a hundred and five | one.six |
| 6571 | sixty-2 × 22 | twenty~71 | 123.five | 56 | eleven.5 | 110 | 151 | 22.eight | ten.4 | 168 | 117 | one.8 |
| 8018 | eighty-2 × 18 | 20~eighty | 141.2 | 63 | fifteen.2 | 110 | 169 | 29.three | thirteen.2 | one hundred ninety | 129 | 2.5 |
| 8571 | 80-2 × 20 | 20~90 | a hundred forty five.2 | sixty five | fifteen.2 | one hundred twenty | 185 | 29.3 | sixteen.2 | 210 | 137 | 2.9 |
| 8571 | eighty-2 × 22 | twenty~a hundred | 157.two | seventy one | fifteen.two | a hundred and forty | 202 | 29.3 | 21.8 | 226 | 137 | three.6 |
| 1571 | one hundred-2 × 22 | 65~a hundred and ten | 178.eight | 80 | 18.8 | 162 | 233 | 38.eight | 32.4 | 281 | 153 | four.6 |
| 12018 | 120-2 × 18 | 35~one hundred twenty five | 202.7 | ninety | 22.seven | 170 | 256 | forty five.four | 43.two | 307 | 181 | 6.2 |
| 12571 | a hundred and twenty-2 × 22 | 35~140 | 222.seven | one hundred | 22.seven | 210 | 304 | forty five.four | sixty nine.one | 357 | 181 | 8.one |
Related Products
NM Coupling Curved Jaw Coupling FCL Coupling
Producing
Apps:
About Us
Kasin group was recognized in 1989, and its fir EPT item is casting provider trolley for energy & free conveyor method. In 1995, EPT purchased HangZhou Guoping Forging Factory (LYGP), a marketer of forging bolts & nuts to electrical power & free line industry in china. With this acquisition, EPT positioned itself as one of main areas suppliers of monorail and electricity & free conveyor technique in china.
In 2005, H&H Corp., a professional company of massive measurement conveyor chain, was bought a portion as sharehould by Kasin, and labored as export window to all in excess of the globe, especially bucket elevator chain, sugar mill chain, welded mill scaper chain.
In 2015, EPT proven itself machinery company/ EPT machinery(ZheJiang )Co.,Ltd., developed fleixible coupling, eg: FCL Coupling, NM Coupling, Curved Jaw Coupling, Chain Coupling andJaw Coupling.
Today, EPT is 1 of the bigge EPT specialist speciali EPT of EPT Class EPT Chain, Drop Forged Rivetless Chain, Forged Chain, Sugar Mill Chain, Bucket EPT Chain, Adaptable Couplings and 100% to oversea market, masking Japan, U.S. and Europ and so forth.
With the certification of ISO 9001 and GB/T 19001, EPT give best top quality merchandise at the reasonable price, to win-earn scenario in lengthy-terms cooperation, adhering to the slogan: “FIR EPT TIME, Every TIME”.
Our mission is to supply highe EPT top quality merchandise at the be EPT possible price tag. And in performing so, to offer an unmatched client experience and to build client tru EPT and fulfillment. Honest, Good quality, Effective, Building, Protection the 5 vital elements constituting KASIN, which is the crucial motto for all of the EPT employees. Consequently, we keep striving to construct a corporate program that is extremely appreciated and we hope that you carry on to decide on and use EPT goods with delight and satisfaction.
Exhibition
Certificates
Our Provider
one. The concerns about the coupling will be answered inside 24 several hours.
two. Update the procession of manufacturing.
three. Our expert engineer can solution complex questions,support you solve specialized issues and help you select the mo EPT suited item in accordance to your requirment.
4. Warranty twelve months: Totally free substitute of defective merchandise in twelve months.
Packing Detai EPT & Delivery
Internal Packing: Carton, Regular export packing or In accordance to customer’s necessity
Outer packing: wooden instances or In accordance to customer’s prerequisite
FAQ
Q: Are you investing business or producer ?
A: We are professionally company in China and possess ourself Forging & Casting-workshop, warmly welcome to pay a visit to our factory at any time.
Q: How extended is your shipping time?
A: Typically it is 5-10 times if the goods are in stock. or it is 15-25 times if the merchandise are not in stock, it is in accordance to quantity.
Q: Do you offer samples ? is it free of charge or added ?
A: Indeed, it’s offered for EPT to submit sample for acceptance free of charge of demand, however it truly is EPT regulation: for new potentioal buyer, sample is free of charge but client is responsilble for logistic payment.
Q: What is your conditions of payment ?
A: 100%T/T Before cargo after examine well
If you have an EPT question, p EPT truly feel free to speak to us as beneath:
EPT Industries(ZheJiang ) Co.,Ltd.
No.989,Guoshun Road, ZheJiang FengPu Industrial Park,
FengXian District, ZheJiang , P.R.China, 201400
Tel: 86~571-8822571/8822 0571 -57152031 Fax: 86~571-8822571/8822 0571 -57152030
Http://
The use of first tools manufacturer’s (OEM) element numbers or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our business and the detailed substitution areas contained herein are not sponsored, approved, or created by the OEM.
Lovejoy Cost made in China – replacement parts – in Sao Jose dos Campos Brazil Standard L070 Flexible Jaw Coupling with top quality
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 distinct branches. For far more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
EPT L070 Jaw Kind couplings are offered in the industry’s huge EPT variety of inventory bore/keyway mixtures.
These couplings require no lubrication and offer hugely reliable services for gentle, medium, and hefty responsibility electrical motor and inside combustion electricity transmission applications.
Now we offer a few diverse kinds of the inserts,rubber,urethane and hytrel,color can be created to order..
For the hubs,commom content is GG25 and aluminum.
Remember to contact us to learn more.
ZheJiang shine transmission equipment Co., Ltd is specialised in producing and marketing transmission products. Our merchandise are exported to the globe renowned machinery firm in Europe, The usa, South Africa, Australia, southea EPT Asia and so on.
Our principal merchandise include: European pulley, American pulley, couplings, taper bushing, qd bush, lock factor, adjustable motor base, motor rail, sprockets, chain, bolt on hubs, weld on hubs, jaw crusher tools & spare areas and all varieties of non-regular Casting products and so on.
The very good good quality of our products is demonstrated in a variety of equipment tools. For illustration, mining tools, grain tools, supporter, air compressor, vacuum pump, woodworking equipment, papermaking machinery, mixing products etc.
Our slogan is”certified merchandise acquire customers, good services benefits consumers”. By setting up a closer cooperation with outdated and new clients, We’ EPT be in a position to guarantee a acquire-win scenario build and development with each other.
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 distinct branches. For much more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of original equipment manufacturer’s (OEM) part figures or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our firm and the detailed substitution components contained herein are not sponsored, accredited, or produced by the OEM.
Fire price made in China – replacement parts – in Cali Colombia Protection Ductile Casting Iron Grooved Flexible Coupling with top quality
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 distinct branches. For far more particulars: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Fire Defense Ductile Casting Iron Grooved Flexible Coupling
Sort: Rigid coupling, Flexible coupling
Materials: Ductile Iron ASTM A536 Gr.sixty five-forty five-12
Tecnique: Casting
Dimensions: 1″-twelve”, special measurement and layout as for each your drawing
Force: 300PSI/2.07Mpa
Surface Treatment method: Dacromet, Galvanized, Paiting (Purple(RAL3000), Orange, Blue)
Certification: FM, UL, ISO
Packaging Particulars:
one) Carton boxes, plywood pallet(1CBM)with plastic film,30boxes per pallet at most.
two) Plywood cases(1CBM). Or as customer’s necessity.
Application:
one) Automatic sprinkler technique for hearth protection on commercial, civil and municipal constructions like water giving, fuel giving, heat supplying, and many others.
two) Industrial pipeline technique on delivery, mine, oil area, textile, powder plant, and so on.
three) Pipeline program on subway station, railway station, airport, seaport, bridge, etc.
| Product: | FM UL Ductile Casting Iron Grooved Pipe Fittings |
| Series: | Rigid coupling, Flexible coupling, Elbow, Tee, Cross, Mechanical Tee, Reducer, Adaptor Flange, Convoluted Flange, Split Flange |
| Regular: | Ductile Iron: conform to ASTM A536 Gr.65-forty five-12 Groove Common: AWWA C606-Groove and Shouldered Joints Thread Standard: NPT, BSPT, BSP/RC Bolts and Nuts: ASTM A449 |
| Techonology: | Casting |
| Dimensions: | one”-twelve”, unique dimensions and design and style in accordance to customer’s drawing |
| Pressure: | 300PSI/2.07Mpa |
| Treatment method: | Dacromet, Galvanized, Paiting(Crimson(RAL3000), Orange, Blue) |
| Certificates: | FM & UL |
| Packaging Information | 1) Carton bins, plywood pallet(1CBM)with plastic film,30boxes for every pallet at most. two) Plywood cases(1CBM). Or as customer’s prerequisite. three)Plastic bag with single merchandise(This is not our regular packing, but can do as customer’s requirement |
| Software: | Hearth security |
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 different branches. For a lot more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of original gear manufacturer’s (OEM) element quantities or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating product use and compatibility. Our organization and the detailed replacement elements contained herein are not sponsored, accepted, or made by the OEM.
Casting Custom made in China – replacement parts – in Aracaju Brazil Pipe Fitting Flexible Coupling Cdu Joint with top quality
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 diverse branches. For much more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Factory Wholesale Ductile Iron CDU Coupling With Complete Specs
Merchandise Description
Feature: ductile iron grooved coupling
1) Substance:ductile iron ASTM A536-twelve/ QT450-10 / GGG45
2) Decreasing installation fees
three) Application: Electricity plant Heating,air flow and air conditioning Industrial plant Water treatment method Plumbing Fire safety Mining and mine processing Oil area Maritime. This sort of coupling is developed for the pipe bearing reasonable strain. It enables managed angle, linear and rotational movement at every joint and provides the extra rewards of expansion, contraction and deflection. This is usful to accommodate uneven laying surfaces, and movement from thermal modifications, location, seismic impact or EPT triggers. Flexible coupling can be used in fire security program, feed drinking water, fuel technique and and many others.
Detailed Images
UL&FM Ductile Iron Grooved Pipe Fitting
| Merchandise Title | Ductile Iron grooved Pipe fittings |
| Products Collection | Rigid Coupling, Flexible Coupling |
| Grooved Equal Tee, Grooved Lowering Tee | |
| Grooved Mechanical Tee, Threaded Mechanical Tee, Threaded U-Bolted Mechanical Tee | |
| 90°Elbow,45°Elbow,22.5°Elbow,eleven.25°Elbow | |
| Grooved Equal Cross, Grooved Reducing Cross ,Threaded Reducing Cross | |
| Grooved Reducer, Threaded Reducer, Grooved Eccentric Reducer | |
| Grooved Adaptor Flange, Threaded Adaptor Flange, | |
| Cap | |
| Produce for each Customer’s Drawing | |
| Merchandise Assortment | FM UL authorized Ductile Iron grooved Pipe fitting and Couplings Joints |
| Certification | FM/UL |
| Dimensions | 1inch-12inch |
| Material | Ductile Iron, ASTM A536/QT450-ten |
| Technic | Casting |
| Functioning Force | three hundred PSI/2.07 Mpa |
| Surface area End | Epoxy Powder, Paint, Galvanization, |
| Payment Term | T/T,L/C |
| Application | 1)Automatic sprinkler method for fire defense on professional ,civil and municipal constructions like drinking water supplying ,fuel giving, warmth supplying, etc |
| 2)Industrial pipeline program on transport ,mine, oil subject, textile, powder plant, and so forth. | |
| 3)Pipeline technique on subway station ,railway station ,airport, seaport, bridge, and so on |
Solution Process
Company Info
Ji EPT Casting Factory has a complete set of casting, machining, coating, rubber, testing and EPT manufacturing and good quality testing method. The top goods of the company are grooved pipe fittings and accessories, from the United States, blended with the genuine, in rigid accordance with the ISO9001 global quality administration technique to arrange manufacturing, the items have handed the countrywide mounted hearth extinguishing and hearth supervision and inspection heart, the mechanical component of industrial products tests heart and a number of authoritative department testing and certification, all in accordance with the countrywide common GB5135.
Our Certificate
Packaging and Shipment
FAQ
Q: Are you investing organization or manufacturer?
A: We are a factory.
Q: How lengthy is your shipping and delivery time?
A: Typically fifteen days soon after the down payment. EPT thirty to ninety times.
Q: Do you provide samples? Is it cost-free or added?
A: Yes, we could provide the sample for free charge but do not shell out the co EPT of freight.
Q: What is your conditions of payment?
A: Payment<=1000USD, 100% in advance.
Payment>=1000USD, thirty% T/T in progress ,balance before shippment.
If you have an EPT concern, p EPT really feel cost-free to make contact with us.
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 various branches. For much more information: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of authentic equipment manufacturer’s (OEM) element numbers or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating merchandise use and compatibility. Our company and the listed substitute parts contained herein are not sponsored, accepted, or produced by the OEM.