Product Description
100HP Farm Agri Garden Lawn Agriculture Machinery Tractor
Technical Parameters
| Model No. | TL1004 | |
| Type | 4*4 | |
| Engine | Model | QC4115TA |
| Rated power(kw) | 73.5 | |
| RPM | 2300 | |
| Overall dimension (L*W*H) | 4365*2048*3060 | |
| Tread(mm) | Front | 1610(Can be adjusted to 1950) |
| Rear | 1620(Can be adjusted to 2571) | |
| Wheelbase | 2195 | |
| Clutch Type | Single blade,dry,butterfly spring pressed, separate operation, double function | |
| Gear Box | Two shaft, Straight teeth, differential lock | |
| Gear shift | 16F+8R | |
| Weight (kg) | 3400 | |
| Tyre | Front | 8.3-24 |
| Rear | 14.9-30 | |
| PTO(RPM) | Rear seperated, 540/1000 rpm | |
| PTO Shaft Spline (mm) | 8D-38×32×6 | |
Tractor Features
1.Fuel consumption reach upto 1 liter/hour diesel.
2. Differential lock prevent rear wheels skidding when climbing, operating in paddy land and rainy weather.
3.Equip with double speed of PTO shaft 540/760 rpm. Adapted to different field type.
4.Adopt full hydraulic steering, independent fuel tank, easy operating and high mobility.
5.Adjustable front and rear tracks meet agricultural needs of different areas. Extra-large water tank and high capacity maintenance-free battery make the machine with best heat-dispersion and starting performance.
6.Can adopt to various implements,such as plough,disc plough,ratory tiller,disc harrow,etc
Service
Pre-sales service
1, 24 hours online .Your inquiry will be quick reply by email .
2,Professionally and patiently introduction,details pictures and working video to show machine .
3,Visting our factory.
Service on sales
1,Test every machine and inspect the machine seriously .
2,Send the machine picture which you order , then packing it with standard export package after you confirm the machine is ok .
3,Delivery:If ship by sea .after delivery to seaport .Will tell you the shipping time and arrival time . Finally, send all original documents to you by Express. We will tell you the tracking number after we post the documents.
After-sales service
1, 24 hours online to solve any problem . Supply you English manual book and technical support , maintain and install video to help you solve the problem, or dispatch worker to your factory.
2 Training how to install the machine, training how to use, maintain and repair the machine.
FAQ
1. What is the voltage/phase for this machine ?
220V 50Hz/single phase ,380V 50Hz/three phase .We also could produce according to customer’s requirement.
2. What is your terms of payment?
T/T 30% as deposit, and &70% before delivery. We will show you the photos of the products and packages before you pay the balance.
3. What your terms of delivery?
EXW,FOB,CFR,CIF,DAF.
4. How about your delivery time?
Generally, it will take about 13 days after receipt of deposit payment. The specific delivery time depends on the items and the quantity of your order.
5. What’s your MOQ?
1 set
6. How should I do if meet some trouble while using?
We can supply English manual book and also take a video for showing how to resolve the problems or dispatch our worker to your factory.
| After-sales Service: | Yes |
|---|---|
| Warranty: | 1year |
| Type: | Wheel Tractor |
| Usage: | Farm Tractor, Garden Tractor, Lawn Tractor, Compact Tractor, Diesel Engine Tractor |
| Certification: | ISO, CCC, ISO/TS16949 |
| Drive Wheel: | 4WD |
| Customization: |
Available
| Customized Request |
|---|
The Different Parts of a PTO Shaft
Power Take-Off (PTO) shafts are an integral part of a tractor’s driveline. Without them, a tractor cannot operate. It is essential to understand the different parts of a PTO shaft, as they are crucial for the operation of your tractor. These parts are typically overlooked during routine tractor maintenance checks, but knowing more about them will help you practice on farm machinery better.
Tractor’s power take-off (PTO) shaft
A Tractor’s power take-off (or PTO) shaft transfers power from the tractor to an implement. These shafts typically rotate at speeds between 540 and 1000 rpm. A number of safety features help prevent accidental contact between the shaft and the implement.
In order to avoid this problem, tractor operators should be vigilant while operating their tractors. They should make sure that the tractor’s power take-off (PTO) shaft is shielded. These shields include a master shield for the PTO stub, a PTO integral journal shield, and an implement input connection shield. The PTO master shield is mounted on the tractor and extends over the PTO stub on three sides. It is designed to prevent collisions between the tractor and any connected machine drive shaft.
A power take-off (PTO) shaft is an important component on any tractor. It is a shaft that transmits mechanical power from a tractor to an implement or separate machine. Early PTOs used a transmission and were located at the rear of the tractor. They are now available with hydraulic or mechanical drivelines. These power take-offs transfer the tractor’s power to a secondary piece of equipment through a driveshaft.
Proper PTO shaft guards protect people from stepping on rotating shafts. The PTO should not compress fully at any point in the operating range. It should have several inches of overlap at the maximum operating extension. A PTO guard should be positioned properly for each machine.
Despite these benefits, there are still many risks associated with PTO shafts. These powerful and potentially dangerous pieces of machinery can cause severe injury if not used safely. Luckily, proper installation of safety shields can reduce the risk of injury.
Types
PTO shafts come in a variety of different shapes, sizes, and materials. The most common types are square and round, but there are also star-shaped and trilobed types. While the star-shaped type is a typical North American design, the trilobed and lemon-shaped varieties are typically German or Italian. Typically, the lemon-shaped ones are made of an alloy called ‘Lemon Yellow.’ In some cases, the shaft will come with snap rings.
Different manufacturers use various materials for their PTO shafts. The tube of a welded drive shaft must be strong enough to handle the force exerted by the PTO. There are many different materials available, but some are stronger than others. Before choosing the type of drive shaft that is right for your machine, make sure that you know the exact measurements of your driveline.
When deciding between different types of PTO shafts, you must also consider the materials that will be used for your particular application. While splines are the most common material for PTO shafts, you can find various types that have different uses. Carbon steel is malleable and has a low carbon content, which makes it more reliable. A ferrous steel is more durable and contains metals like nickel, chromium, and molybdenum, which make it a great alternative to carbon steel.
A PTO gearbox input shaft extends between the PTO gearbox and the PTO clutch. It is mounted with a toothed wheel 8. An inductive sensor 9 on the shaft outputs a pulsed electronic signal based on the rotational speed of the shaft. These pulsed signals are called inductive speed sensors.
Rotation direction
The PTO shaft is a critical part of the power take-off of a farm tractor. It allows the tractor to transfer power from the engine to an implement such as a mower or other garden equipment. The rotation direction of the PTO shaft depends on the type of implement. Some implements only accept rotation in one direction, while others require rotation in both directions.
Safety chain
One of the best ways to protect your PTO shaft is to use a safety chain. A safety chain is a chain that is attached to the PTO shaft, and it prevents the plastic shield from spinning on the shaft. This chain should be fastened to a suitable point on your machine or tractor. It should not be attached to the lower lift arms or the U-guard.
PTO shafts can be very dangerous if they are not guarded. They can rotate as high as 1000 rpm and could seriously injure you. It is also important to ensure that the PTO shaft guard is fitted correctly, and that the tractor is turned off before working on it. In addition, avoiding wearing loose clothing when working around a PTO shaft can help protect your life.
Another way to protect the PTO shaft is to shield the IID shaft. This can be done by using shielding over the straight part of the shaft, the PTO connection, or the Implement Input Connection. A protruding bolt or pin can catch clothing and snag it. If not shielded, the clothing can wrap around the shaft, trapping the person against it.
A good safety chain should be positioned between the tractor and the PTO shaft. The chain should be at least 50 mm wider than the PTO shaft, and should be in good condition. It should cover the entire length of the PTO shaft from the tractor to the first bearing. The PTO shaft must also be fitted with the correct bearing ring. It is also vital to ensure that the PTO guard does not bend or break, as this could result in damage to the PTO shaft.
Shield
A PTO shaft shield protects the PTO shaft from possible impacts. It is typically made of plastic, but can also be made of metal. These shields are easy to damage, and are therefore preferably made of a durable material. The shields are held in place with brackets. The shields are made with two parts: an inner shield and a protective sleeve.
An improvement to the PTO shaft shield is a bracket that supports both the outer and PTO shaft. It is shown in conjunction with a towed machine in FIGS. 2 and 7. FIG. 7 is a side elevation of the bracket mounted to the tongue of the machine. This shield is designed to prevent the PTO shaft from becoming damaged during the towed process.
The main risk associated with PTO mishaps is entanglement, which can result in serious injuries. If a shaft separates from a tractor, it can strike nearby workers or people. Proper maintenance can minimize the risk of entanglement and save lives. Thankfully, equipment manufacturers have made huge strides in reducing the risk of these accidents. Operators should always make sure that the PTO shaft shield is in place to avoid the risk of entanglement.
In addition to preventing entanglement, a PTO shaft shield also helps protect the universal joints that are mounted on the PTO shaft. The shield is made of plastic or steel. It is typically shaped like an inverted U and covers both the top and sides of the shaft. A detachable PTO shaft shield is also available.
As with all parts of a PTO driveline, the PTO shaft shield should be maintained to prevent damage to the bearings. It is necessary to inspect the shield and replace it whenever it becomes damaged. PTO equipment is often used outdoors, and it is frequently exposed to crop debris, rust, and dirt that can affect the bearings. Proper maintenance will extend the equipment’s lifespan and reduce maintenance costs.
editor by CX 2023-05-04
China 35HP 30HP 40HP 60HP Compact Farming Equipment Agricultural Small Tractors 50HP Mini 4X4 4WD Agricol Agriculture Farm Tractor pto shaft at tractor supply
Merchandise Description
Our Benefits
Sales rank:China’s top a few.
Sample: Assist sample order.
OEM: Assist specialized changes.
Cost-free teach: plant coaching on installation and maintenance tactics.
QC: Quality inspection prior to shipping for every single unit.
Our Catalog
Product Description
| We have numerous versions about the device, if you are interested, we will deliver the catalogue and specifics for you, please ship the enquiry.thanks. |
Our have numerous types 4 wheel tractor of power.#12HP #15HP #18HP #20HP #22HP #25HP #28HP #30HP #35HP #40HP #45HP #50HP #60HP #70HP.
Farm tractor diesel engine has basic and compact construction, manipulate, mild bodyweight, can be commonly utilized for a variety of subject. like small farmland, vineyards, flower backyard garden, greenhouse notably ideal for mountainous area.
HangZhou LANSU TRACTOR
#12HP #15HP #18HP #20HP #22HP #25HP #28HP #30HP #35HP ,
multifunction, reliable quality, reasonably priced
Can be equipped with variety of agricultural tools for distinct farming works
Renowned and substantial-quality engine, improve chassis, robust energy
Energy emission upgrade, more advanced efficiency, low gas consumption, high reliability
Simple operation, number of upkeep
Can design and style and create the tractors in OEM
Multi cylinder tractor
#25HP #28HP #30HP #35HP #40HP #45HP #50HP #60HP #70HP.
HangZhou Lansu ,tractor use popular s brand entrance push axle so that top quality is highly reputable.
Adopting a new kind of substantial force lifter makes the function more handy and flexible.
Equipped with exterior double oil cylinders, the functioning influence is better.
Solution Parameters
| MODEL | LS-Mini tractor 12hp | ||
| Engine | Model | 195 | |
| Type | 1cylinder,4-stroke,horizontal,water-cooled,diesel | ||
| Cooling Mode | Condenser (Radiator) | ||
| Power | 12hp | ||
| Combustion System | Direct Injection | ||
| Cylinder Bore | 92mm | ||
| Piston Stroke | 95mm | ||
| Compression Ratio | eighteen:01 | ||
| Rated Speed | 2400rpm | ||
| Fuel Efficiency: | ≤257gl/kw.hr | ||
| Displacement | .632 | ||
| Fuel Tank Capacity | 8L | ||
| Water Tank Capacity | 2L | ||
| Net Weight | 112kg | ||
| Gross Weight | 122 | ||
| Overall dimensions:(L×W×H) | 2140×905×1175mm Without tiller | ||
| Overall dimensions:(L×W×H) | 2600×1000×1175mm With tiller | ||
| Front wheel size | 5.00-12 | ||
| Back wheel size | seven.fifty-16 | ||
| Ground clearance | 180mm | ||
| Working weight | 490kg | ||
| Transmission style | Belt transmission | ||
| Steering style | Steering wheel power steering system | ||
| Brakes | Two side wheel brake | ||
| Starter | Electric start/Hand crank | ||
| Seat | Adjustable | ||
| Gear style | (3+1)*2 6 Forward, 2 Reverse | ||
| Speed | Forward | one.sixty eight, 2.sixty one, 4.22, 6.seventy nine, 10.57, 17.08 | |
| Reverse | 1.29, 5.22 | ||
| Rotary tiller | Transmission Type | Middle Gears Transmission, or side gears transmission | |
| Width | 1000mm Adjustable | ||
| Number of blades | 18-20pcs | ||
| Working depth | one hundred fifty-250mm | ||
| Up and down control | Hydraulic system | ||
| Design | LS-Modest tractor 25hp | ||
| Wheel push | 4×2 | ||
| Dimensions | 2700×1400×1400 | ||
| Weight(kg) | 950-1571 | ||
| Front wheel(mm) | 900,1000,1100,1200 adjustable | ||
| Rear wheel(mm) | 960,a thousand,1100,1200,1300 adjustable | ||
| Wheel foundation(mm) | 1400 | ||
| Min. ground distance(mm) | 350 | ||
| Equipment change | six+one | ||
| Tyre dimension | nine.5-twenty/five hundred-fourteen | ||
| Motor Type | |||
| Rated power(kW) | 18.32kw | ||
| Rated speed (r/min) | Drinking water cooled,vertical,4 stoke and direct injection | ||
| Commence | Electrical | ||
| Transmission | 2200 | ||
| Clutch | single ,dry friction, solitary clutch | ||
| Link/PTO | 3×2+one | ||
| 3 position suspension/ Rear P.T.O 540 | |||
| Model | LS- Center tractor 50hp | ||
| Horsepower&Push Variety | 50hp, 4×4 | ||
| Motor | |||
| Engine Product | 50HP | ||
| Sort | Vertical, Water-Cooled, Four Strokes, Immediate in Injection | ||
| Rated Output(kW) | 36.eight | ||
| TRACTOR PARAMETER | |||
| Dimension L*W*H (mm) | 3558*1500*2245 | ||
| Wheel Base (mm) | 1900 | ||
| Wheel Tread F/R(mm) | 1060/1100 | ||
| Min Ground Clearance(mm) | three hundred | ||
| TRANSMISSION | |||
| Gear Shift | 8F+2R | ||
| Clutch Type | Dry One-stage | ||
| Running Technique | |||
| Tire F/R | 650-16/eleven.2-24 | ||
| Steering | Hydraulic Steering | ||
| Brake | Toe Sort | ||
| Park Brake | Latch Pedal | ||
| Operating Technique | |||
| Hitch | Partial Divided Type, 3-Level hydraulic hitch,Classification one | ||
| Max. Lift Pressure(N) | ≥6300 | ||
| Rear PTO | Rear Rectangle Spline, 6 Enamel, 540/720rpm | ||
Accessories and Resources
Farming instruments for Farm tractor
Farm tractor is a all-powerful agricultural machinery.lt can help farmers land consolidation (plought,rotary tillaqe, scarification,ditching,ridqing, earth up,grass mower Paddy subject beating and so forth).
Crop planting and seeders (wheat, , corn, soybean seed, peanut, planting potatoes, veggies eto Harvest (rice, wheat harvest, corn , peanut, potatoes, sweet potato Onions, ginger, qarlic).
The other administration of land, drinking water, spray, fertilization, paddy area operation and many others).
Packaging & Shipping and delivery
Firm Profile
With a lot more than 20 years of sector encounters, our worldwide trade headquarters found in port town -HangZhou, machines produced in HangZhou, HangZhou, HangZhou, ZheJiang China. There are 7 series with in excess of sixty various of farming machines offered like electricity tiller, walking tractor, 4 wheel tractor, spray machine, thresher and supporting farm resources,these kinds of as rotary tiller,plow,harrow,entrance loader,backhoe,grass bander, trailer,pump,corn planter,corn harvester and reaper. Presently passed the intercontinental certification agency -S G S certification,technological person can be despatched abroad. In the subject of farming equipment,we can meet up with varied buyer wants by advanced technological innovation and most well-known agricultural device.Exported to far more than forty countries especially South The usa,eastern Europe,center the us and we are top quality provider of help to agricultural machinery task in africa. with prefect One-cease agricultural equipment products service system we get wonderful track record. We are dedicated to producing benefit for our clients and our purpose is to permit farmers in the entire world to enjoy reliable, high quality, cost-effective full set of agricultural devices.
three. Our commitments:
a. With us, your funds is protected.
b. At least 12 months guarantee, quality inspection ahead of cargo.
c. Factory direct provide farming equipment and support you earning more cash.
d. Near the port, rapid creation and with out M O Q, on time supply.
e. OEM offered, offering customized feature equipment to enlarge market place share.
f. Fast solution in 10 minutes.
Inexpensive value, reputable high quality, enjoys farming.
|
US $3,500-8,000 / Piece | |
1 Piece (Min. Order) |
###
| After-sales Service: | Warranty |
|---|---|
| Warranty: | 1 Year |
| Type: | Wheel Tractor |
| Usage: | Farm Tractor |
| Certification: | ISO, CE, EPA, CCC, ISO/TS16949, EEC, XQC, Customer Requirement |
| Drive Wheel: | 4WD |
###
| Samples: |
US$ 2200/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| We have many models about the machine, if you are interested, we will send the catalogue and details for you, please send the enquiry.thanks. |
###
| MODEL | LS-Mini tractor 12hp | ||
| Engine | Model | 195 | |
| Type | 1cylinder,4-stroke,horizontal,water-cooled,diesel | ||
| Cooling Mode | Condenser (Radiator) | ||
| Power | 12hp | ||
| Combustion System | Direct Injection | ||
| Cylinder Bore | 92mm | ||
| Piston Stroke | 95mm | ||
| Compression Ratio | 18:01 | ||
| Rated Speed | 2400rpm | ||
| Fuel Efficiency: | ≤257gl/kw.hr | ||
| Displacement | 0.632 | ||
| Fuel Tank Capacity | 8L | ||
| Water Tank Capacity | 2L | ||
| Net Weight | 112kg | ||
| Gross Weight | 122 | ||
| Overall dimensions:(L×W×H) | 2140×905×1175mm Without tiller | ||
| Overall dimensions:(L×W×H) | 2600×1000×1175mm With tiller | ||
| Front wheel size | 5.00-12 | ||
| Back wheel size | 7.50-16 | ||
| Ground clearance | 180mm | ||
| Working weight | 490kg | ||
| Transmission style | Belt transmission | ||
| Steering style | Steering wheel power steering system | ||
| Brakes | Two side wheel brake | ||
| Starter | Electric start/Hand crank | ||
| Seat | Adjustable | ||
| Gear style | (3+1)*2; 6 Forward, 2 Reverse | ||
| Speed | Forward | 1.68, 2.61, 4.22, 6.79, 10.57, 17.08 | |
| Reverse | 1.29, 5.22 | ||
| Rotary tiller | Transmission Type | Middle Gears Transmission, or side gears transmission | |
| Width | 1000mm Adjustable | ||
| Number of blades | 18-20pcs | ||
| Working depth | 150-250mm | ||
| Up and down control | Hydraulic system | ||
###
| Model | LS-Small tractor 25hp | ||
| Wheel drive | 4×2 | ||
| Dimensions | 2700×1400×1400 | ||
| Weight(kg) | 950-1010 | ||
| Front wheel(mm) | 900,1000,1100,1200 adjustable | ||
| Rear wheel(mm) | 960,1000,1100,1200,1300 adjustable | ||
| Wheel base(mm) | 1400 | ||
| Min. ground distance(mm) | 350 | ||
| Gear shift | 6+1 | ||
| Tyre size | 9.5-20/500-14 | ||
| ENGINE Type | |||
| Rated power(kW) | 18.32kw | ||
| Rated speed (r/min) | Water cooled,vertical,4 stoke and direct injection | ||
| Start | Electric | ||
| Transmission | 2200 | ||
| Clutch | single ,dry friction, single clutch | ||
| Connection/PTO | 3×2+1 | ||
| 3 point suspension/ Rear P.T.O 540 | |||
###
| MODEL | LS- Middle tractor 50hp | ||
| Horsepower&Drive Type | 50hp, 4×4 | ||
| ENGINE | |||
| Engine Model | 50HP | ||
| Type | Vertical, Water-Cooled, Four Strokes, Direct in Injection | ||
| Rated Output(kW) | 36.8 | ||
| TRACTOR PARAMETER | |||
| Dimension L*W*H (mm) | 3558*1500*2245 | ||
| Wheel Base (mm) | 1900 | ||
| Wheel Tread F/R(mm) | 1060/1100 | ||
| Min Ground Clearance(mm) | 300 | ||
| TRANSMISSION | |||
| Gear Shift | 8F+2R | ||
| Clutch Type | Dry Single-stage | ||
| RUNNING SYSTEM | |||
| Tire F/R | 650-16/11.2-24 | ||
| Steering | Hydraulic Steering | ||
| Brake | Toe Type | ||
| Park Brake | Latch Pedal | ||
| WORKING SYSTEM | |||
| Hitch | Partial Separated Type, 3-Point hydraulic hitch,Category 1 | ||
| Max. Lift Force(N) | ≥6300 | ||
| Rear PTO | Rear Rectangle Spline, 6 Teeth, 540/720rpm | ||
|
US $3,500-8,000 / Piece | |
1 Piece (Min. Order) |
###
| After-sales Service: | Warranty |
|---|---|
| Warranty: | 1 Year |
| Type: | Wheel Tractor |
| Usage: | Farm Tractor |
| Certification: | ISO, CE, EPA, CCC, ISO/TS16949, EEC, XQC, Customer Requirement |
| Drive Wheel: | 4WD |
###
| Samples: |
US$ 2200/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| We have many models about the machine, if you are interested, we will send the catalogue and details for you, please send the enquiry.thanks. |
###
| MODEL | LS-Mini tractor 12hp | ||
| Engine | Model | 195 | |
| Type | 1cylinder,4-stroke,horizontal,water-cooled,diesel | ||
| Cooling Mode | Condenser (Radiator) | ||
| Power | 12hp | ||
| Combustion System | Direct Injection | ||
| Cylinder Bore | 92mm | ||
| Piston Stroke | 95mm | ||
| Compression Ratio | 18:01 | ||
| Rated Speed | 2400rpm | ||
| Fuel Efficiency: | ≤257gl/kw.hr | ||
| Displacement | 0.632 | ||
| Fuel Tank Capacity | 8L | ||
| Water Tank Capacity | 2L | ||
| Net Weight | 112kg | ||
| Gross Weight | 122 | ||
| Overall dimensions:(L×W×H) | 2140×905×1175mm Without tiller | ||
| Overall dimensions:(L×W×H) | 2600×1000×1175mm With tiller | ||
| Front wheel size | 5.00-12 | ||
| Back wheel size | 7.50-16 | ||
| Ground clearance | 180mm | ||
| Working weight | 490kg | ||
| Transmission style | Belt transmission | ||
| Steering style | Steering wheel power steering system | ||
| Brakes | Two side wheel brake | ||
| Starter | Electric start/Hand crank | ||
| Seat | Adjustable | ||
| Gear style | (3+1)*2; 6 Forward, 2 Reverse | ||
| Speed | Forward | 1.68, 2.61, 4.22, 6.79, 10.57, 17.08 | |
| Reverse | 1.29, 5.22 | ||
| Rotary tiller | Transmission Type | Middle Gears Transmission, or side gears transmission | |
| Width | 1000mm Adjustable | ||
| Number of blades | 18-20pcs | ||
| Working depth | 150-250mm | ||
| Up and down control | Hydraulic system | ||
###
| Model | LS-Small tractor 25hp | ||
| Wheel drive | 4×2 | ||
| Dimensions | 2700×1400×1400 | ||
| Weight(kg) | 950-1010 | ||
| Front wheel(mm) | 900,1000,1100,1200 adjustable | ||
| Rear wheel(mm) | 960,1000,1100,1200,1300 adjustable | ||
| Wheel base(mm) | 1400 | ||
| Min. ground distance(mm) | 350 | ||
| Gear shift | 6+1 | ||
| Tyre size | 9.5-20/500-14 | ||
| ENGINE Type | |||
| Rated power(kW) | 18.32kw | ||
| Rated speed (r/min) | Water cooled,vertical,4 stoke and direct injection | ||
| Start | Electric | ||
| Transmission | 2200 | ||
| Clutch | single ,dry friction, single clutch | ||
| Connection/PTO | 3×2+1 | ||
| 3 point suspension/ Rear P.T.O 540 | |||
###
| MODEL | LS- Middle tractor 50hp | ||
| Horsepower&Drive Type | 50hp, 4×4 | ||
| ENGINE | |||
| Engine Model | 50HP | ||
| Type | Vertical, Water-Cooled, Four Strokes, Direct in Injection | ||
| Rated Output(kW) | 36.8 | ||
| TRACTOR PARAMETER | |||
| Dimension L*W*H (mm) | 3558*1500*2245 | ||
| Wheel Base (mm) | 1900 | ||
| Wheel Tread F/R(mm) | 1060/1100 | ||
| Min Ground Clearance(mm) | 300 | ||
| TRANSMISSION | |||
| Gear Shift | 8F+2R | ||
| Clutch Type | Dry Single-stage | ||
| RUNNING SYSTEM | |||
| Tire F/R | 650-16/11.2-24 | ||
| Steering | Hydraulic Steering | ||
| Brake | Toe Type | ||
| Park Brake | Latch Pedal | ||
| WORKING SYSTEM | |||
| Hitch | Partial Separated Type, 3-Point hydraulic hitch,Category 1 | ||
| Max. Lift Force(N) | ≥6300 | ||
| Rear PTO | Rear Rectangle Spline, 6 Teeth, 540/720rpm | ||
PTO Shaft Safety Chains
PTO shaft is the part of a tractor that helps transfer power from the tractor to the equipment it is hooked to. A PTO shaft is important if you have a tiller or bush hog. The correct PTO shaft size is crucial for both the tractor and the equipment. If the PTO shaft size is not correct for your equipment, it may not work.
>
Safety chains
<br/Safety chains are an essential part of securing your PTO shaft. They prevent a rotating plastic shield from coming loose and causing injury or damage. It is important to protect your PTO and any other drive shafts on your machine. Watch the video below for more information about the dangers of unguarded PTOs.
PTOs are an efficient way to transfer mechanical power between tractors and implements. They helped revolutionize North American agriculture during the 1930s. Despite their convenience, PTOs have also proven to be one of the most common farm machinery hazards. This fact sheet outlines several important PTO safety precautions.
Safety chains for PTO shafts are necessary to protect both tractor and implement from damage. The PTO shaft must be attached properly to the tractor and the implement before starting the equipment. Before operating, be sure that the safety chains are positioned in a way that allows them to fully move. When operating the PTO, avoid being too aggressive as this can damage the drive line and shaft. For further safety, make sure to fit a torque limiter or clutch on the implement end of the PTO shaft.
PTOs are great for plowing, mowing, and shredding, but they also have potential to cause injuries if you don’t use a safety chain. It’s best to get a chain that is long enough to prevent injuries. Also, be sure that the PTO shaft does not compress completely at any point during the operating range. There should be several inches of overlap in the longest operating extension of the PTO.
Another common hazard with PTOs is IID shafts. While many machines and tractors have driveline guards, these are often missing. If you have a PTO with an IID, you should consider installing a safety chain.
Shield
A swingable tractor PTO shaft shield assembly consists of an inverted U-shaped shield member slidably attached to a bracket. It extends above the PTO shaft and has several notches and pins that engage each other. It can be held in a number of positions and can be retracted when not in use. It also includes a cover member that covers the space between the shield and tractor and abuts the raised portion of the shield member.
The PTO shaft shield is typically made of plastic, but it can also be made of metal. Plastic is less likely to break or damage than metal. The shield is supported by a bracket 51 with a curved distal end 57 and a non-metallic guard 59. When used in conjunction with a bracket, a PTO shaft shield should be properly installed to prevent damage to the shaft.
Keeping the PTO shaft shield in good condition is crucial to the safety of your tractor and your workers. An improperly installed PTO shaft shield can result in severe injuries. It may also ensnare or strike people in the vicinity. Proper maintenance will prevent many of these injuries. Equipment manufacturers have made great strides in reducing the risks of PTO mishaps. Operators are also responsible for keeping the shields in good condition. Removing the guards will only increase the risk to the operator.
A PTO shaft shield is a tubular assembly that is mounted on the tractor PTO shaft. It consists of two telescopic pieces that are held in place by shield support bearings. This shield protects the PTO shaft and the universal joints from debris and prevents premature wear. The shield can be easily removed and replaced if necessary.
IID shaft guard
The IID shaft guard is a safety device used to protect PTO powered machinery from the possibility of separating while in use. The shaft, which is a telescoping shaft, is attached to the PTO stub on tractors. The telescopic feature is convenient when moving across uneven ground. However, this type of shaft can cause serious injury if it separates while in use.
The IID shaft guard can prevent these injuries by completely covering the shaft. The guard is made of metal or plastic and rotates along with the shaft. A person can react in less than five tenths of a second, making the IID shaft guard an important part of PTO safety.
PTO shafts rotate at speeds as high as 540 rpm, which is very fast. A limb could be wrapped around the driveline shaft, causing a serious injury or death. Because of the speed of a PTO, it can be difficult for an individual to discern whether it is engaged or not and may not be aware of the danger.
An IID shaft guard should be fitted to every tractor PTO shaft. It should be tested and rotated regularly. It is also important to keep the tractor engine off when working around the PTO shaft. Using a drawbar to protect driveline components is also important. It will prevent stress on the driveline and reduce the possibility of separation.
Overrunning clutch
An overrunning clutch on a PTO shaft is a mechanism that allows the PTO shaft to rotate freely in one direction while restricting the speed of the implement being hauled behind the tractor. This clutch is also useful for preventing the speed of the implement from exceeding the speed of the tractor while slowing down. It comes in two basic configurations, one for a clockwise and the other for a counter-clockwise direction.
Another type of overrun clutch is used on tractors with a PTO driven bush hog. A bush hog has a flywheel and blades that drive the transmission through the PTO shaft. Without an overrunning clutch, these implements would freewheel while the tractor is driving and would potentially break the shaft.
A PTO overrunning clutch prevents power from backfeeding into the transmission, the part that transmits power to the rear wheels. Without an overrunning clutch, the tractor could backfeed power, causing an accident if the blade assembly hits an object. As such, it is essential to use the overrunning clutch to ensure that your tractor will be safe.
Direction of rotation
Despite its name, the direction of rotation of a PTO shaft can change if necessary. Most PTOs have a single-direction rotation, but you can often reverse the direction by installing a reverse PTO adapter. However, you should only use reverse PTOs when absolutely necessary.
A standard PTO rotation direction has been defined by the International Organization for Standardization (ISO). It is considered necessary to adhere to this standard, as improper rotation can cause damage to implements attached to a PTO. This standard helps farmers avoid problems such as ruined implements. While the direction of rotation of a PTO shaft is not always the same for all PTOs, there are some tractors that allow it to rotate both ways, while others have no restrictions.
The direction of rotation of a PTO shaft can be changed by using a hydraulic pump. Another way to connect a PTO is through a “sandwich” type split shaft unit. These units are mounted between the transmission and engine, and they usually receive drive directly from the engine shaft. They can also deliver complete engine power to a PTO. However, you must modify your vehicle’s driveline to install such a split-shaft unit.
editor by czh 2023-01-30
China Farm Cultivator Rotary Power Tiller with Pto Plough for Tabacco pto shaft extension tractor supply
Item Description
Product Description
Chinese Foremost Power Tiller Manufacturer
Beautiful appearance, outstanding creation, easy operation, sturdy and tough. This equipment adopts the most innovative worm gear box, worm wheel, worm, 2 or 4-travel travel, high steadiness, basic safety and dependability, the handle can be adjusted from top to base, the orchard is far more convenient and flexible to use.Gasoling one hundred seventy motor/diesel air-cooled motor/diesel water-cooled 186 engine.
In depth Photographs
| GASOLINE Design | |||
| Item | a hundred and seventy | 177 | one hundred ninety |
| Motor | 7hp | 9hp | 12hp |
| Transmission variety | Gear drive/belt push | ||
| Start off model | Manual/electric starter | ||
| Functioning width | 500mm | ≥960mm | 1050-1350mm |
| Doing work depth | ≥100mm | 200mm | 200mm |
| Size of wheel | 400-8/350-six | ||
| Adjustment of handle bar | 360 degree horizon and forty five degree vertical | ||
| Gas use | ≤10kh/ha | ||
| Gasoline tank | 5L | ||
| Weight(KG) | a hundred and twenty | 132 | a hundred and fifty |
| Working efficiency | o.1-.2acre/h | o.1-.2acre/h | .3-.4acre/h |
| Doing work velocity | >0.3m/s | ||
| Bundle dimensions | seventy nine*45.5*86cm | ninety eight*fifty seven*81cm | ninety eight*fifty seven*81cm |
| DIESEL Model | |||
| Item | 173 | 178 | 186 |
| Motor | 7hp | 9hp | 12hp |
| Transmission kind | Gear travel | ||
| Commence design | Manual/electrical starter | ||
| Functioning width | 500mm | ≥960mm | 1050-1350mm |
| Working depth | ≥100mm | 200mm | 200mm |
| Size of wheel | 400-8/350-six | ||
| Adjustment of take care of bar | 360 degree horizon and 45 degree vertical | ||
| Fuel consumption | ≤10kh/ha | ||
| Fuel tank | 5L | ||
| Bodyweight(KG) | 164kg | 178kg | 182kg |
| Functioning efficiency | o.1-.2acre/h | o.1-.2acre/h | .3-.4acre/h |
| Functioning speed | >0.3m/s | ||
| Package size | seventy nine*45.5*86cm | 102*57*81cm | 102*57*81cm |
Engineers accessible to support machinery abroad
Farming tools mini energy tiller device
FAQ
1.Q: Total price tag list for these goods
A: If you need the price tag listing for these products, make sure you notify the item design so that I can quotation you appropriately. Remember to recognize we have a very wide merchandise selection, we do not usually provide complete merchandise price listing.
two. Q: Business terms
A: Cargo time: twenty five-30days following your payment
Shipment: By sea
Loading port: HangZhou port, China
Location port: …To be advised
Payment: T/T,L/C
Warranty: 1 year
3.Q:How can I order from you?
A: You should send us your enquiry record we will reply you inside 1 operating days.
4.Q:If the finger I look for are not in your catalogue, what ought to I do?
A: We can develop it according to your drawing or sample.
five. Q: Why choose BIA for cooperation?
A: Evaluating with our opponents, we have significantly more advantages as follows:
one. Much more than 20years in manufacturing farming machine
2. Far more Professional Sales staffs to promise the far better service
three. Much more agri equipment for your selection
4. Much more New products into your variety to avoid cost competitors
five. More substantial amount manufacturing and shipment
six. Better high quality to assure far better Credit score.
7. Faster delivery time: Only7days
eight. Much more adhere high quality checking ahead of cargo.
nine. A lot more affordable soon after-income support phrases.
10. More popular model: BIA” brand and “CE”ceitification.
11.Reduced restore charge and negative assessment charge
Remember to really feel free to contact me if you have any inquiries.
Thanks. Have a nice working day!
|
US $230-390 / Set | |
1 Set (Min. Order) |
###
| Type: | Rotary Tiller |
|---|---|
| Application Field: | Agriculture, Livestock, Aquaculture, Fisheries, Forestry |
| Farming Policy: | Dry Cultivating Machinery |
| Power Source: | Diesel |
| Operation: | Movable Operation, Land |
| Traction Type: | Hanging |
###
| Samples: |
US$ 500/SET
1 SET(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| GASOLINE MODEL | |||
| Item | 170 | 177 | 190 |
| Engine | 7hp | 9hp | 12hp |
| Transmission type | Gear drive/belt drive | ||
| Start model | Manual/electric starter | ||
| Working width | 500mm | ≥960mm | 1050-1350mm |
| Working depth | ≥100mm | 200mm | 200mm |
| Size of wheel | 400-8/350-6 | ||
| Adjustment of handle bar | 360 degree horizon and 45 degree vertical | ||
| Fuel consumption | ≤10kh/ha | ||
| Fuel tank | 5L | ||
| Weight(KG) | 120 | 132 | 150 |
| Working efficiency | o.1-0.2acre/h | o.1-0.2acre/h | 0.3-0.4acre/h |
| Working speed | >0.3m/s | ||
| Package size | 79*45.5*86cm | 98*57*81cm | 98*57*81cm |
| DIESEL MODEL | |||
| Item | 173 | 178 | 186 |
| Engine | 7hp | 9hp | 12hp |
| Transmission type | Gear drive | ||
| Start model | Manual/electric starter | ||
| Working width | 500mm | ≥960mm | 1050-1350mm |
| Working depth | ≥100mm | 200mm | 200mm |
| Size of wheel | 400-8/350-6 | ||
| Adjustment of handle bar | 360 degree horizon and 45 degree vertical | ||
| Fuel consumption | ≤10kh/ha | ||
| Fuel tank | 5L | ||
| Weight(KG) | 164kg | 178kg | 182kg |
| Working efficiency | o.1-0.2acre/h | o.1-0.2acre/h | 0.3-0.4acre/h |
| Working speed | >0.3m/s | ||
| Package size | 79*45.5*86cm | 102*57*81cm | 102*57*81cm |
|
US $230-390 / Set | |
1 Set (Min. Order) |
###
| Type: | Rotary Tiller |
|---|---|
| Application Field: | Agriculture, Livestock, Aquaculture, Fisheries, Forestry |
| Farming Policy: | Dry Cultivating Machinery |
| Power Source: | Diesel |
| Operation: | Movable Operation, Land |
| Traction Type: | Hanging |
###
| Samples: |
US$ 500/SET
1 SET(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| GASOLINE MODEL | |||
| Item | 170 | 177 | 190 |
| Engine | 7hp | 9hp | 12hp |
| Transmission type | Gear drive/belt drive | ||
| Start model | Manual/electric starter | ||
| Working width | 500mm | ≥960mm | 1050-1350mm |
| Working depth | ≥100mm | 200mm | 200mm |
| Size of wheel | 400-8/350-6 | ||
| Adjustment of handle bar | 360 degree horizon and 45 degree vertical | ||
| Fuel consumption | ≤10kh/ha | ||
| Fuel tank | 5L | ||
| Weight(KG) | 120 | 132 | 150 |
| Working efficiency | o.1-0.2acre/h | o.1-0.2acre/h | 0.3-0.4acre/h |
| Working speed | >0.3m/s | ||
| Package size | 79*45.5*86cm | 98*57*81cm | 98*57*81cm |
| DIESEL MODEL | |||
| Item | 173 | 178 | 186 |
| Engine | 7hp | 9hp | 12hp |
| Transmission type | Gear drive | ||
| Start model | Manual/electric starter | ||
| Working width | 500mm | ≥960mm | 1050-1350mm |
| Working depth | ≥100mm | 200mm | 200mm |
| Size of wheel | 400-8/350-6 | ||
| Adjustment of handle bar | 360 degree horizon and 45 degree vertical | ||
| Fuel consumption | ≤10kh/ha | ||
| Fuel tank | 5L | ||
| Weight(KG) | 164kg | 178kg | 182kg |
| Working efficiency | o.1-0.2acre/h | o.1-0.2acre/h | 0.3-0.4acre/h |
| Working speed | >0.3m/s | ||
| Package size | 79*45.5*86cm | 102*57*81cm | 102*57*81cm |
Safety Precautions For a PTO Shaft
When you are working around PTOs, be sure to observe several safety precautions. These include removing the shield, keeping a safe distance from the machine, and avoiding entanglement. Entanglement is a serious injury that can even lead to death. Workers who are near the machine should always maintain a safe distance, especially if the speed of the machine is fast enough to entangle clothing. The speed of the PTO is usually 540 to 1,000 revolutions per minute, and the speed is enough to cause injury in a split second.
Safety precautions
One of the most important safety precautions for a PTO shaft is to make sure that it is properly guarded at all times. An unguarded PTO shaft can entanglement a worker, cause an injury, or even cause death. Operator awareness is key in preventing this hazard. Among other things, workers should not make repairs while the PTO is in use or wear loose or frayed clothing when working near the PTO. Likewise, they should read and follow instructions provided with their tractor and implement. Finally, they should use PTO shafts only for their intended purpose.
Another important safety precaution is to wear a protective gear such as a helmet and gloves before operating a PTO shaft. This type of equipment can be extremely dangerous because of its speed. A PTO shaft that is rotating at 540 rpm can travel two metres in less than a second. Damaged shielding is a common cause of entanglement, so it is important to check your machinery for damage before operating it.
When operating a tractor, PTOs should be kept clear of loose clothing. Loose clothing can easily catch on a rotating PTO shaft. Long hair or jewelry can also become entangled in a PTO shaft. It is also important to remember to secure the PTO shaft guard when the tractor is not in use. Also, never engage a PTO when the engine is off.
Types of pto shafts
PTO shafts are used in tractors and other equipment to secure the secondary gear in the tractor. They are available in different styles and sizes. These shafts are designed to withstand pressure, impacts, and tension. They may also include a shear pin and slip clutch. Before buying a new PTO shaft, make sure to check its measurements.
There are two types of PTO shafts available in an Agric rototiller. The first one has a slip clutch and the other has a shear pin safety device. In order to identify the type of PTO shaft used in a particular tractor, it is important to understand what it is used for.
There are two types of PTO shafts: the external and internal. The latter is used for larger machines, such as a lawnmower. The former is suitable for agricultural applications and is the preferred type for large tractors. The former is suitable for plowing, mowing, and shredding.
Transmission PTO shafts are the oldest type of PTO. They are connected to the tractor’s transmission. When a tractor is in gear, it stops the PTO shaft. However, when it’s not, it’s ineffective and can pose serious problems, such as when mowing. This type of PTO can also cause an overrun clutch to prevent the PTO shaft from working properly.
Reaction time
It’s important to know your reaction time when working around a power take-off (PTO) shaft. This part of the machine rotates at approximately 540 revolutions per minute and can pull in seven feet per second. Reaction time can be affected by age, physical condition, medications, lack of sleep, and stress. If you’re working around a PTO, be sure to remove any loose jewelry or other items that might interfere with your reaction time.
PTO accidents can be caused by several factors. The operator, the machine, and the environment all play a role. The operator’s physical and mental condition can also contribute to unsafe actions. For example, young operators may lack the knowledge and experience to recognize hazards. Older workers may also have slower reaction times, which can make it difficult to react quickly to slippery work areas.
Reaction time is measured as the time between a stimulus and the response. It does not include the time required to move the hand. Reaction time is a critical factor in sports, where athletes need to be quick to respond to the moves of their opponents. A good reaction time is necessary to score points.
A demonstration of the speed of a PTO shaft is a great tool to demonstrate how dangerous this part of a machine can be. To demonstrate the speed, use a 7-foot sash cord tied to a sliding collar universal joint. Select a 540-rpm PTO shaft, and a three-inch diameter shield. In one second, the rotating shaft makes nine revolutions and travels 7.1 feet. However, a cordless drill does not rotate at full speed and will take at least two seconds to wrap around the string.
Standardization
The standardization of PTO shafts in tractors is a major project. The EU Machinery Directive requires the protection of operators from rotating parts, such as the PTO. This is especially important when parts are accessible, as clothing can easily be wrapped around them, resulting in an accident. To prevent such accidents, manufacturers have begun to install non-rotating guards over the PTO drive shaft. These guards comply with the current EU good practice.
The European Standard EN 12965:2003+A2:2009 specifies the safety requirements for PTO drive shafts and their guards. It also specifies safe working practices for these components. The standard was approved by CEN on 16 September 2019. It is important to follow these regulations to ensure safe operation.
In the 1980s, a movement began among agricultural engineers to standardize the PTO shaft. The movement began because the different types of PTO shafts had not been interchangeable. A common example is the Deutz-Fendt shaft, which had become a standard for tractors.
As the power for PTO drives comes from the gearbox, the counter shaft acts as the PTO outlet. Standardization of PTO speeds makes it easier for manufacturers to design equipment to meet a specified speed. For example, a thresher is expected to run at a specific peripheral velocity of the threshing cylinder, which is a function of standard PTO speeds. This also allows designers to plan pulley arrangements with the standard PTO speed in mind.
Safety chains
The PTO shaft is an integral part of a tractor or implement, so it’s essential to secure it with safety chains. These chains are welded to both ends of the shaft and serve as backup connections between the tractor and trailer coupling point. There are several types of chains available, from domestic to metric, to meet your specific needs.
Because of the high speeds of PTO shafts, it’s crucial to protect these parts from being tangled. A single fall of a PTO shaft can cause serious injury or even death. In such an unfortunate situation, safety chains can prevent such injuries. PTO shafts are also extremely dangerous because the components can become hot while they are operating.
In addition to safety chains, operators must also be aware of the hazards that can occur when working near a PTO shaft. Unsafe behaviors, such as performing repairs while operating a machine, or wearing frayed clothing can lead to serious injury or death. In addition, all users should follow the instructions on the tractor or implement they’re using. It’s also essential to use a PTO shaft for its intended purpose.
In addition to safety chains, farmers should also ensure that the PTO drive shaft is securely attached to the tractor or implement. A broken or damaged PTO guard can be just as dangerous as an unprotected shaft. In addition, a poorly fitting PTO guard may provide a false sense of security. For this reason, it’s important to use protective clothing when operating a tractor or implement powered by a PTO.
Shield
The CZPT-Co universal fit PTO shaft shield is a simple and easy to use shield that has a patented lever release. The shield comes in two sizes, the smaller diameter shield is for shafts with a diameter of 1 5/16″ to 2 1/8″ and the larger diameter shield fits shafts of 2″ to 3 1/8″. Each shield is pre-installed with an assortment of bearings. The shield’s length is measured from the end of the yoke bearing groove to the other end.
If you’ve ever tried to work on a PTO shaft, you know that it can be frustrating. A PTO shaft shield is a safety device that covers the shaft and prevents it from rotating. These shields are also designed to be easy to connect and remove. The CZPT safety clip makes it easy to connect or disconnect the shield, and locks into place to prevent it from rotating with the inner driveshaft. The CZPT material used in RPM Transmissions driveline safety shields is strong and rigid.
Another improvement of this PTO shaft shield is the bracket that supports the two-piece PTO shaft and outer shield. The bracket is shown in FIG. 2 as an angled front view. FIG. 7 is a side elevation view of the bracket mounted to the machine tongue.
editor by czh 2023-01-05