Product Description
Made in China Paddy tire tractors DQ904 90HP 4WD wheel farm Tractor hot sale in Philippines
Tractor Main Features and Advantages:
1.Equipped famous brand engine showing advanced capacity,low fuel consumption,high economic efficiency.
2. Streamlined appearance design, beautiful and generous.
3.Transmission Case adopt meshed shift and add the gearbox interlock device makes the operation more smoothly,reliable and easier.
4. Double action clutch with disc spring, perform steadily and easy to operate.
5. Fully hydraulic steering system greatly reduced driver’s work strength.
6. Wet disc brake device, reliable brake performance.
7. Separate injection of hydraulic oil, reliable to operate.
8. The lifter with force and position adjustment, with reliable lift.
9. Tractor PTO:
PTO in Double speed : 540/760r/min Optional, For high working efficiency.
PTO shaft of 6 or 8 spline Optional, adaptable for agricultural equipment of all over the world.
10. Big Chassis and Heavy-duty Rear axle for Durable Strong machine.
11. Full series light, ROPS,Sunshade/Canopy, Fan/Heater/Air-conditioned cabin are all available, for more comfortable driving environment.
Tractor Main specificaiton and Technical parameters:
Model | DQ900 | DQ904 | DQ950 | DQ954 |
Drive type | 4×2 | 4×4 | 4×2 | 4×4 |
Engine | ||||
Engine type | YTO or CZPT brand, 4 or 6 cylinder diesel engine | |||
Capacity of fuel tank(L) | 150 | 150 | 150 | 150 |
Rated speed (r/min) | 2300 | |||
Engine power at rated speed(kw/hp) | 66.2kw/90HP | 69.8kw/95HP | ||
Transmission | ||||
Clutch | Dry, dual-stage type | |||
PTO Speed (rpm) | 540/1000 or 760/1000 | |||
Gearshift | 8F+4R/16F+8R(optional)/8F+8R(optional) | |||
Hydraulic system | ||||
Hydraulic output valve | 2-Group (optional) | |||
Three point linkage | ||||
Category of 3-point link | Category II | |||
Lifting force (at point of 610mm)KN | >15 | >16 | >15 | >16 |
Technical parameter | ||||
Dimension (LxWxH) (mm) | 4593x2050x2810 | |||
Wheel base(mm) | 2362 | 2195 | 2362 | 2195 |
Track base(mm) front wheel | 1485 | 1610 | 1485 | 1610 |
Track base(mm) rear wheel | 1620 | |||
The smallest clearance(mm) | 476 | 379 | 476 | 379 |
Front tyre | 6.5-20 | 11.2-24 | 6.5-20 | 11.2-24 |
Rear tyre | 16.9-34(common)/18.4-30(optional) | |||
Optional Configurations | ||||
Common cabin with Fan; Heater cabin; AC cabin; ROPS; Canopy (Sunshade); 8F+8R shuttle gearshift, 16F+4R creeper gearshift, 2-Group Hydraulic output valve; Front ballast, Rear ballast; Paddy tire, 18.4-30 big rear tire, 6 cylinder diesel engine, Heavy-duty rear, Air brake, Swing draw bar | ||||
Loading Quantity/40HC | 3 Sets in Nude packing for CBU shipping |
DQ904 90HP 4WD Tractor details show:
Advance Manufacutring Line:
Tractor Packing and Loading container for Delivering goods :
Different Configurations DQ904 90HP 4WD Tractor for choose:
Both Standard R1 tire and Paddy tire tractors are all available :
Best price will be quoted for you as soon as receive your Requirement !
Type: | Wheel Tractor |
---|---|
Usage: | Farm Tractor, Garden Tractor, Lawn Tractor |
Certification: | ISO, CE, CCC, Pvoc, Coc |
Drive Wheel: | 4WD |
Emission Standard: | Euro III |
Fuel: | Gas / Diesel |
Customization: |
Available
| Customized Request |
---|
Choosing the Right PTO Shaft
There are several different types of PTO shaft. These include the Transmission PTO, the Economy PTO, the Type 4″ pto shaft, and the Two-stage clutch pto shaft. It is important to choose the correct one to ensure a smooth operation. When choosing a PTO shaft, consider the characteristics and uses of each type.
Transmission PTO
If you have been experiencing trouble with your Transmission PTO shaft, you may want to take it to a mechanic to have it looked at. A PTO problem can be frustrating and costly to fix. Here are some tips for resolving PTO problems. Start by checking your transmission oil and air pressure levels. Also, check for cracked or kinked hoses and screens. If none of these steps resolve the issue, you may need to replace your PTO.
There are two types of Transmission PTO shafts, Type 1 and Type 2. The first type was designed to be used for 540 rpm applications. Later versions were designed to handle higher PTO powers, and the diameter was changed to increase its speed. Both types have different diameters, so be sure to check the spline count.
Transmission PTOs are commonly used between tractors and farm equipment. These PTOs have the feature of a universal transmission, although the input and output ends are not always on the same plane. The drive shaft is also able to vary the angle between input and output ends. This allows the drive shaft to operate within a specified left and right expansion range.
When replacing a transmission PTO, make sure you check the shaft’s speed and backlash before installing it. In addition, check the transmission gears to ensure they are in good condition. Experts from suppliers recommend inspecting and replacing any debris on the gaskets. They also recommend setting backlash units between the transmission and PTO. In general, backlash units should range from 6,000 to 12,000 units.
To maintain the efficiency of your Transmission PTO, it is necessary to maintain the proper oil level. Make sure you regularly check the PTO fluid and filter. A change of fluid and filter is recommended every 75,000 miles and 300,000 miles. Using a dial indicator can help you to check backlash and prevent damage to the PTO or mating gear.
Economy PTO
The Economy PTO shaft allows you to reduce the engine speed when driving your PTO. This mode uses different gears to adjust the PTO shaft revs. The cab-mounted control/monitoring unit 14 uses the PTO speed information to set the parameters of the PTO. In order to operate this system, you must be aware of the lever 21 position and the type of shaft fitted.
The ratio of the input shaft 7 and the output shaft 22 determines the precise value. The ratio also depends on the type of PTO shaft and the ratio of the gearbox. There are two different types of PTO shafts, and each has different toothed wheels. To choose the right one, you should know the ratio of the shaft and the gearbox.
A Domestic PTO shaft is the most common type used in North America. It comes in a wide range of diameters and splines and can be used on a variety of applications. It is durable and is resistant to pressure, impacts, and tension. It is also equipped with a shear pin and slip clutch to protect the PTO from common obstacles.
An Economy PTO shaft enables your tractor to run at lower rpms, reducing noise and vibrations. It is perfect for a variety of agricultural equipment and is controlled by your tractor’s transmission. It is available in two types: mechanical and hydraulic. A mechanical version has a clutch, while a hydraulic version has a lever to control the torque.
The Economy PTO shaft allows you to reduce fuel costs and increase productivity by up to 2%. It also reduces noise in the cab, which is a plus. Its auto-mode feature helps you operate the Economy PTO with ease. This system can also be programmed to automatically disengage the PTO when the linkage is raised.
Two-stage clutch on pto shaft
If you’re looking to get the most out of your tractor, you should check the clutch for two-stage operation. Two-stage clutches use two separate stages to disengage the PTO and gears. If the clutch does not disengage when you push the pedal, you’ll need to adjust it. Rust buildup can cause the clutch to stick and require a rebuild or replacement. Fortunately, there are many ways to check whether your clutch is slipping.
A two-stage clutch is commonly used in transmissions with live PTOs. The first stage operates the driven portion of the transmission, while the second stage controls the PTO. This arrangement allows the PTO to work independently of the transmission, which is especially useful in tractors that use mower attachments.
This two-stage clutch is usually accompanied by a gearbox. The gears in the PTO shaft are set up to rotate at a rate of 540 revolutions per minute (rpm) when the engine is running. The second clutch is designed to operate at a higher speed and can be used with different power sources.
A two-stage clutch on the PTO shaft is a good option if you’re using a tractor that doesn’t have a slip clutch. It will limit the tractor’s torque, so you’ll save money on fuel while doing work. It also helps reduce noise and vibration.
Types of independent pto shafts
Independent PTO shafts come with their own clutch, which enables them to run independently from the tractor’s transmission. There are two main types of independent PTO shafts: mechanical and hydraulic. The mechanical version has a separate on-off selector and control lever. The hydraulic version only has a single selector.
These different types of PTO shafts are only compatible with specific implements. The speed at which they transfer energy is different, too, and some are faster than others. This is why some large tractors have higher-speed PTOs than smaller tractors. A transmission PTO requires a parking break, while an independent PTO does not.
A newer type of independent PTO shaft, the Type 4, is also available. This model runs at a higher rotational speed, around 1300 rpm, which allows for a more efficient transfer of power. In addition, the Type 4 shaft is larger, with 22 splines and a diameter of 57.5 mm. It is designed to support PTO powers of up to 450 kW or 600 horsepower.
Another type is called a “sandwich” type, which is mounted between the transmission and engine. It receives its drive from the engine shaft. This type can transfer the full power of the engine to the PTO, although it needs modifications to the driveline. It also comes with its own lubrication system.
Independent PTO shafts can be manually operated or electronically controlled. The independent PTO is easy to engage and is often operated by shifting the PTO selector lever away from the ‘OFF’ position or by flipping the PTO switch to the “ON” position. Independent PTO shafts may also feature an additional manual clutch. This clutch helps regulate heavy loads and protects the PTO drive system.
editor by CX 2023-04-25
China Custom Tractor Agricultural Equipment 4WD 60HP Farm Tractors cutting pto shaft
Product Description
Agricultural Equipment 4WD 60HP Farm Tractor Price for Sale
Technical Parameter
Model No. | TL600 | |
Type | 4*2 | |
Engine | Model | 4105 |
Rated power(kw) | 46 | |
RPM | 2400 | |
Overall dimension (L*W*H) | 3740*1910*2590 | |
Tread(mm) | Front | 1500 |
Rear | 1530 | |
Wheelbase | 2188 | |
Clutch Type | Single blade,dry,butterfly spring pressed, separate operation, double function | |
Gear Box | Two shaft, Straight teeth, differential lock | |
Gear shift | (4+1)*2 | |
Weight (kg) | 2960 | |
Tyre | Front | 7.50-16 |
Rear | 14.9-30 | |
PTO(RPM) | Rear seperated, 540/760 rpm | |
PTO Shaft Spline (mm) | 6D-38×32×6 | |
Conveyance | SKD,6 units in a 40’HC container |
Tractor Features
1.Fuel consumption reach upto 1 liter/hour diesel.
2. Differential lock prevent rear wheels skidding when climbing, operating in paddy land and rainy weather.
3.Equip with double speed of PTO shaft 540/760 rpm. Adapted to different field type.
4.Adopt full hydraulic steering, independent fuel tank, easy operating and high mobility.
5.Adjustable front and rear tracks meet agricultural needs of different areas. Extra-large water tank and high capacity maintenance-free battery make the machine with best heat-dispersion and starting performance.
6.Can adopt to various implements,such as plough,disc plough,ratory tiller,disc harrow,etc.
Company Profile
TANGLAND International Company, is a wholly-owned subsidiary of CZPT GROUP, is the professional company for Trading & International Exchange and cooperation. We set up branches in ZheJiang , ZheJiang and HangZhou, as well as overseas assembling plant, or/and showing room and service centre, in Pakistan, UAE, and some Asian & African countries. CZPT GROUP is a comprehensive company including manufacturing, assembling, Casting & Foundry, producing Casting parts, Electric Vehicle, Tractor, Light truck, Semi-trailer, Steel ball and Nylon 6 products, Running an Industrial products’Information & Exchange Platform, the headquarter is in Ji’nan, ZheJiang , and assembling, machining & foundry and castingplants are in HangZhou, HangZhou, HangZhou and HangZhou, theInformation and Exchange platform named-TANGLANDINFORMATION & TECHNOLOGY COMPANY.
Workshop
Package
Our Service
Pre-Sales Service
1. 24 hours online .Your inquiry will be quick reply by email .
2. Professionally and patiently introduction,details pictures and working video to show machine .
3.Visting our Factory.
On-Sale Service
1,Test every machine and inspect the machine seriously .
2,Send the machine picture which you order , then packing it with standard export package after you confirm the machine is ok .
3,Delivery:If ship by sea .after delivery to seaport .Will tell you the shipping time and arrival time . Finally, send all original documents to you by Express. We will tell you the tracking number after we post the documents.
After-Sales Service
1. Training how to install the machine, training how to use,maintain and repair the machine.
2. Engineers available to service machinery overseas.
3. 24 hours online to solve any problem . Supply you English manual book and technical support , maintain and install video to help you solve the problem, or dispatch worker to your factory.
FAQ
Q1.What is your terms of payment?
A:T/T 40% as deposit,and 60% before loading.we will show you the photos of the products and packages before you pay the balance.
Q2.What your terms of delivery?
A:EXW,FOB,CFR,CIF,DAF.
Q3.How about your delivery time?
A:Generally,it will take about 20 days after receipt of deposit payment.The specific delivery time depends on the items and the quantity of your order.
Q4.Are you interested in dealership with local company?
A:Yes,we are quite interested in this business.we’d like to cooperate with some local partner to sell more tractors in local market and supply better service.
Q5.Do you test all your tractors before delivery?
A:Yes,we have 100% tractor test and complete quality control system before delivery.
Q6.How do you make our business long-term and good relationship?
A:1.We keep good quality,competitive price and efficient service to ensure our customers benefit;
2.We protect the benefit of dealer or agent,in specifical period and region.
After-sales Service: | Yes |
---|---|
Warranty: | One Year |
Type: | Wheel Tractor |
Usage: | Farm Tractor, Garden Tractor, Lawn Tractor, Compact Tractor, Diesel Engine Tractor |
Certification: | ISO, CCC, ISO/TS16949 |
Drive Wheel: | 2WD/4WD |
Customization: |
Available
| Customized Request |
---|
PTO Shafts and PTO Shaft Shields
When choosing a PTO shaft, measuring the various pieces is an important aspect. Each piece must be measured in a specific way, with the shaft in a closed position. Measure the length between the outsides of the yokes. The closed length will help you determine the correct PTO series size for the horsepower of your tractor.
540 rpm
A 540 RPM PTO Shaft will fit CZPT PTO models. These shafts are slightly indexed to allow for easy PTO drive hookups. These shafts will also work with 1000 RPM implements. They also feature a snap ring that will allow for quick and easy removal.
PTO shafts are commonly divided into two types: 1000 RPM and 540 RPM. The 540 RPM PTO shafts are smaller, with only six splines, while the 1000 RPM PTO shafts are larger. The 540 RPM version is used with implements that require less horsepower and are made for light-duty use.
The PTO shaft transfers power from the tractor’s engine to a PTO-driven implement. When operating at its recommended speed, the PTO shaft rotates at 540 rpm (9 times per second). The higher speed PTO shafts have more splines.
Safety chains
Safety chains for PTO shafts are an important safety feature to consider when operating a tractor. These chains are welded to the drive end of a tractor or implement. They are used to prevent the plastic shield from spinning on the PTO shaft. The chain’s reaction time is slower than the speed of the PTO shaft, which makes it important for safety.
When operating a tractor, it is important to follow the manufacturer’s instructions and keep the machine and equipment in a safe location. A poorly-guarded PTO can entrap ground personnel or cause a serious accident. Operator awareness is also important. It is important to avoid stepping over a revolving shaft, wearing loose clothing, or making repairs while the tractor is running. It is also important to follow the manufacturer’s instructions and use the PTO for its intended purpose.
The safety chains for PTO shafts must be properly connected and fully functional before each use. During a PTO operation, the PTO shaft may rotate as much as 1000 rpm, which is potentially deadly. In addition to safety chains, the tractor should have a clutch or torque limiter fitted on the implement end.
The PTO shaft must have a correct length for the machine. If it is a sliding metal PTO drive shaft, it is important to lubricate it according to manufacturer’s specifications. Lubrication is recommended after every eight hours of operation. Also, make sure that the button on the end of the PTO shaft moves freely. Hammering it into place can damage the guard and the shaft.
A PTO driveline hazard is one of the oldest farm machinery hazards. It refers to the PTO or Implement Input Connection. There are often protruding pins and bolts on the driveline, which can snag clothing.
Shield
The PTO shaft shield is a protective piece that encloses a PTO shaft. These shields are usually plastic, but some are also made of metal. They are made to protect the PTO shaft from debris, which can cause premature wear and damage to the universal joints. A PTO shaft shield is not a permanent fixture, but can be easily removed for replacement or repair.
The PTO shaft shield should be checked periodically to ensure that it is in good condition. It should have no loose ends or loose bolts. Ensure that the shear bolts and pins are the right length and hardness for the PTO shaft. Additionally, the operator should wear snug clothing to avoid stepping on the PTO shaft while working.
The PTO shaft shield should fit snugly over the PTO shaft. If the PTO shaft is loose, it may be difficult to attach the safety shield. However, with a proper PTO shaft shield, the process should be quick and easy. A CZPT safety clip allows easy removal and prevents co-rotation between the inner driveshaft and the safety shield. The driveline safety shield from RPM Transmissions is made of CZPT, which is a rigid and durable material.
In addition, some machine drive shafts are lacking a shield. This can cause a safety hazard. Without a PTO shaft shield, an operator may accidentally touch the shaft and get injured. These guards prevent this danger by enclosing the shaft in a plastic or metal guard.
The PTO shaft shield is a crucial part of tractor safety. It helps protect the operator from accidental entanglement while operating the tractor. When the PTO shaft stub becomes separated, it can cause severe injuries and even fatalities. Thankfully, the industry has made tremendous progress in reducing the risks associated with PTO mishaps. Operators must make sure they maintain the shields and do not remove them if not in use.
Reverse rotation
The PTO shaft reverse rotation mechanism prevents the main drive shaft from moving in a direction opposite to the direction of rotation of the driven shaft. The mechanism is compact, reducing the length of the rotation shaft. The mechanism includes two reversing members: first reversing member 151 rotates in a clockwise direction and second reversing member 153 rotates in a counterclockwise direction.
In a PTO shaft reverse rotation mechanism, a driven shaft is inserted into a hollow cylindrical body. It is rotatably positioned relative to the main driving shaft 112 and radially symmetrically around it. As a result, the driving and reverse-rotation mechanisms are symmetric.
One such PTO shaft reverse rotation mechanism has a main drive shaft and a driven shaft, and a plurality of transmission units coupled to it. The driven shaft and the transmission member rotate in tandem. The transmission units are arranged radially about the main driving member and the driven shaft. Alternatively, one of the reversing units may comprise the second reversing member and the first driving member.
editor by CX
2023-04-14
China 35HP 30HP 40HP 60HP Compact Farming Equipment Agricultural Small Tractors 50HP Mini 4X4 4WD Agricol Agriculture Farm Tractor pto shaft at tractor supply
Merchandise Description
Our Benefits
Sales rank:China’s top a few.
Sample: Assist sample order.
OEM: Assist specialized changes.
Cost-free teach: plant coaching on installation and maintenance tactics.
QC: Quality inspection prior to shipping for every single unit.
Our Catalog
Product Description
We have numerous versions about the device, if you are interested, we will deliver the catalogue and specifics for you, please ship the enquiry.thanks. |
Our have numerous types 4 wheel tractor of power.#12HP #15HP #18HP #20HP #22HP #25HP #28HP #30HP #35HP #40HP #45HP #50HP #60HP #70HP.
Farm tractor diesel engine has basic and compact construction, manipulate, mild bodyweight, can be commonly utilized for a variety of subject. like small farmland, vineyards, flower backyard garden, greenhouse notably ideal for mountainous area.
HangZhou LANSU TRACTOR
#12HP #15HP #18HP #20HP #22HP #25HP #28HP #30HP #35HP ,
multifunction, reliable quality, reasonably priced
Can be equipped with variety of agricultural tools for distinct farming works
Renowned and substantial-quality engine, improve chassis, robust energy
Energy emission upgrade, more advanced efficiency, low gas consumption, high reliability
Simple operation, number of upkeep
Can design and style and create the tractors in OEM
Multi cylinder tractor
#25HP #28HP #30HP #35HP #40HP #45HP #50HP #60HP #70HP.
HangZhou Lansu ,tractor use popular s brand entrance push axle so that top quality is highly reputable.
Adopting a new kind of substantial force lifter makes the function more handy and flexible.
Equipped with exterior double oil cylinders, the functioning influence is better.
Solution Parameters
MODEL | LS-Mini tractor 12hp | ||
Engine | Model | 195 | |
Type | 1cylinder,4-stroke,horizontal,water-cooled,diesel | ||
Cooling Mode | Condenser (Radiator) | ||
Power | 12hp | ||
Combustion System | Direct Injection | ||
Cylinder Bore | 92mm | ||
Piston Stroke | 95mm | ||
Compression Ratio | eighteen:01 | ||
Rated Speed | 2400rpm | ||
Fuel Efficiency: | ≤257gl/kw.hr | ||
Displacement | .632 | ||
Fuel Tank Capacity | 8L | ||
Water Tank Capacity | 2L | ||
Net Weight | 112kg | ||
Gross Weight | 122 | ||
Overall dimensions:(L×W×H) | 2140×905×1175mm Without tiller | ||
Overall dimensions:(L×W×H) | 2600×1000×1175mm With tiller | ||
Front wheel size | 5.00-12 | ||
Back wheel size | seven.fifty-16 | ||
Ground clearance | 180mm | ||
Working weight | 490kg | ||
Transmission style | Belt transmission | ||
Steering style | Steering wheel power steering system | ||
Brakes | Two side wheel brake | ||
Starter | Electric start/Hand crank | ||
Seat | Adjustable | ||
Gear style | (3+1)*2 6 Forward, 2 Reverse | ||
Speed | Forward | one.sixty eight, 2.sixty one, 4.22, 6.seventy nine, 10.57, 17.08 | |
Reverse | 1.29, 5.22 | ||
Rotary tiller | Transmission Type | Middle Gears Transmission, or side gears transmission | |
Width | 1000mm Adjustable | ||
Number of blades | 18-20pcs | ||
Working depth | one hundred fifty-250mm | ||
Up and down control | Hydraulic system |
Design | LS-Modest tractor 25hp | ||
Wheel push | 4×2 | ||
Dimensions | 2700×1400×1400 | ||
Weight(kg) | 950-1571 | ||
Front wheel(mm) | 900,1000,1100,1200 adjustable | ||
Rear wheel(mm) | 960,a thousand,1100,1200,1300 adjustable | ||
Wheel foundation(mm) | 1400 | ||
Min. ground distance(mm) | 350 | ||
Equipment change | six+one | ||
Tyre dimension | nine.5-twenty/five hundred-fourteen | ||
Motor Type | |||
Rated power(kW) | 18.32kw | ||
Rated speed (r/min) | Drinking water cooled,vertical,4 stoke and direct injection | ||
Commence | Electrical | ||
Transmission | 2200 | ||
Clutch | single ,dry friction, solitary clutch | ||
Link/PTO | 3×2+one | ||
3 position suspension/ Rear P.T.O 540 |
Model | LS- Center tractor 50hp | ||
Horsepower&Push Variety | 50hp, 4×4 | ||
Motor | |||
Engine Product | 50HP | ||
Sort | Vertical, Water-Cooled, Four Strokes, Immediate in Injection | ||
Rated Output(kW) | 36.eight | ||
TRACTOR PARAMETER | |||
Dimension L*W*H (mm) | 3558*1500*2245 | ||
Wheel Base (mm) | 1900 | ||
Wheel Tread F/R(mm) | 1060/1100 | ||
Min Ground Clearance(mm) | three hundred | ||
TRANSMISSION | |||
Gear Shift | 8F+2R | ||
Clutch Type | Dry One-stage | ||
Running Technique | |||
Tire F/R | 650-16/eleven.2-24 | ||
Steering | Hydraulic Steering | ||
Brake | Toe Sort | ||
Park Brake | Latch Pedal | ||
Operating Technique | |||
Hitch | Partial Divided Type, 3-Level hydraulic hitch,Classification one | ||
Max. Lift Pressure(N) | ≥6300 | ||
Rear PTO | Rear Rectangle Spline, 6 Enamel, 540/720rpm |
Accessories and Resources
Farming instruments for Farm tractor
Farm tractor is a all-powerful agricultural machinery.lt can help farmers land consolidation (plought,rotary tillaqe, scarification,ditching,ridqing, earth up,grass mower Paddy subject beating and so forth).
Crop planting and seeders (wheat, , corn, soybean seed, peanut, planting potatoes, veggies eto Harvest (rice, wheat harvest, corn , peanut, potatoes, sweet potato Onions, ginger, qarlic).
The other administration of land, drinking water, spray, fertilization, paddy area operation and many others).
Packaging & Shipping and delivery
Firm Profile
With a lot more than 20 years of sector encounters, our worldwide trade headquarters found in port town -HangZhou, machines produced in HangZhou, HangZhou, HangZhou, ZheJiang China. There are 7 series with in excess of sixty various of farming machines offered like electricity tiller, walking tractor, 4 wheel tractor, spray machine, thresher and supporting farm resources,these kinds of as rotary tiller,plow,harrow,entrance loader,backhoe,grass bander, trailer,pump,corn planter,corn harvester and reaper. Presently passed the intercontinental certification agency -S G S certification,technological person can be despatched abroad. In the subject of farming equipment,we can meet up with varied buyer wants by advanced technological innovation and most well-known agricultural device.Exported to far more than forty countries especially South The usa,eastern Europe,center the us and we are top quality provider of help to agricultural machinery task in africa. with prefect One-cease agricultural equipment products service system we get wonderful track record. We are dedicated to producing benefit for our clients and our purpose is to permit farmers in the entire world to enjoy reliable, high quality, cost-effective full set of agricultural devices.
three. Our commitments:
a. With us, your funds is protected.
b. At least 12 months guarantee, quality inspection ahead of cargo.
c. Factory direct provide farming equipment and support you earning more cash.
d. Near the port, rapid creation and with out M O Q, on time supply.
e. OEM offered, offering customized feature equipment to enlarge market place share.
f. Fast solution in 10 minutes.
Inexpensive value, reputable high quality, enjoys farming.
US $3,500-8,000 / Piece | |
1 Piece (Min. Order) |
###
After-sales Service: | Warranty |
---|---|
Warranty: | 1 Year |
Type: | Wheel Tractor |
Usage: | Farm Tractor |
Certification: | ISO, CE, EPA, CCC, ISO/TS16949, EEC, XQC, Customer Requirement |
Drive Wheel: | 4WD |
###
Samples: |
US$ 2200/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
We have many models about the machine, if you are interested, we will send the catalogue and details for you, please send the enquiry.thanks. |
###
MODEL | LS-Mini tractor 12hp | ||
Engine | Model | 195 | |
Type | 1cylinder,4-stroke,horizontal,water-cooled,diesel | ||
Cooling Mode | Condenser (Radiator) | ||
Power | 12hp | ||
Combustion System | Direct Injection | ||
Cylinder Bore | 92mm | ||
Piston Stroke | 95mm | ||
Compression Ratio | 18:01 | ||
Rated Speed | 2400rpm | ||
Fuel Efficiency: | ≤257gl/kw.hr | ||
Displacement | 0.632 | ||
Fuel Tank Capacity | 8L | ||
Water Tank Capacity | 2L | ||
Net Weight | 112kg | ||
Gross Weight | 122 | ||
Overall dimensions:(L×W×H) | 2140×905×1175mm Without tiller | ||
Overall dimensions:(L×W×H) | 2600×1000×1175mm With tiller | ||
Front wheel size | 5.00-12 | ||
Back wheel size | 7.50-16 | ||
Ground clearance | 180mm | ||
Working weight | 490kg | ||
Transmission style | Belt transmission | ||
Steering style | Steering wheel power steering system | ||
Brakes | Two side wheel brake | ||
Starter | Electric start/Hand crank | ||
Seat | Adjustable | ||
Gear style | (3+1)*2; 6 Forward, 2 Reverse | ||
Speed | Forward | 1.68, 2.61, 4.22, 6.79, 10.57, 17.08 | |
Reverse | 1.29, 5.22 | ||
Rotary tiller | Transmission Type | Middle Gears Transmission, or side gears transmission | |
Width | 1000mm Adjustable | ||
Number of blades | 18-20pcs | ||
Working depth | 150-250mm | ||
Up and down control | Hydraulic system |
###
Model | LS-Small tractor 25hp | ||
Wheel drive | 4×2 | ||
Dimensions | 2700×1400×1400 | ||
Weight(kg) | 950-1010 | ||
Front wheel(mm) | 900,1000,1100,1200 adjustable | ||
Rear wheel(mm) | 960,1000,1100,1200,1300 adjustable | ||
Wheel base(mm) | 1400 | ||
Min. ground distance(mm) | 350 | ||
Gear shift | 6+1 | ||
Tyre size | 9.5-20/500-14 | ||
ENGINE Type | |||
Rated power(kW) | 18.32kw | ||
Rated speed (r/min) | Water cooled,vertical,4 stoke and direct injection | ||
Start | Electric | ||
Transmission | 2200 | ||
Clutch | single ,dry friction, single clutch | ||
Connection/PTO | 3×2+1 | ||
3 point suspension/ Rear P.T.O 540 |
###
MODEL | LS- Middle tractor 50hp | ||
Horsepower&Drive Type | 50hp, 4×4 | ||
ENGINE | |||
Engine Model | 50HP | ||
Type | Vertical, Water-Cooled, Four Strokes, Direct in Injection | ||
Rated Output(kW) | 36.8 | ||
TRACTOR PARAMETER | |||
Dimension L*W*H (mm) | 3558*1500*2245 | ||
Wheel Base (mm) | 1900 | ||
Wheel Tread F/R(mm) | 1060/1100 | ||
Min Ground Clearance(mm) | 300 | ||
TRANSMISSION | |||
Gear Shift | 8F+2R | ||
Clutch Type | Dry Single-stage | ||
RUNNING SYSTEM | |||
Tire F/R | 650-16/11.2-24 | ||
Steering | Hydraulic Steering | ||
Brake | Toe Type | ||
Park Brake | Latch Pedal | ||
WORKING SYSTEM | |||
Hitch | Partial Separated Type, 3-Point hydraulic hitch,Category 1 | ||
Max. Lift Force(N) | ≥6300 | ||
Rear PTO | Rear Rectangle Spline, 6 Teeth, 540/720rpm |
US $3,500-8,000 / Piece | |
1 Piece (Min. Order) |
###
After-sales Service: | Warranty |
---|---|
Warranty: | 1 Year |
Type: | Wheel Tractor |
Usage: | Farm Tractor |
Certification: | ISO, CE, EPA, CCC, ISO/TS16949, EEC, XQC, Customer Requirement |
Drive Wheel: | 4WD |
###
Samples: |
US$ 2200/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
We have many models about the machine, if you are interested, we will send the catalogue and details for you, please send the enquiry.thanks. |
###
MODEL | LS-Mini tractor 12hp | ||
Engine | Model | 195 | |
Type | 1cylinder,4-stroke,horizontal,water-cooled,diesel | ||
Cooling Mode | Condenser (Radiator) | ||
Power | 12hp | ||
Combustion System | Direct Injection | ||
Cylinder Bore | 92mm | ||
Piston Stroke | 95mm | ||
Compression Ratio | 18:01 | ||
Rated Speed | 2400rpm | ||
Fuel Efficiency: | ≤257gl/kw.hr | ||
Displacement | 0.632 | ||
Fuel Tank Capacity | 8L | ||
Water Tank Capacity | 2L | ||
Net Weight | 112kg | ||
Gross Weight | 122 | ||
Overall dimensions:(L×W×H) | 2140×905×1175mm Without tiller | ||
Overall dimensions:(L×W×H) | 2600×1000×1175mm With tiller | ||
Front wheel size | 5.00-12 | ||
Back wheel size | 7.50-16 | ||
Ground clearance | 180mm | ||
Working weight | 490kg | ||
Transmission style | Belt transmission | ||
Steering style | Steering wheel power steering system | ||
Brakes | Two side wheel brake | ||
Starter | Electric start/Hand crank | ||
Seat | Adjustable | ||
Gear style | (3+1)*2; 6 Forward, 2 Reverse | ||
Speed | Forward | 1.68, 2.61, 4.22, 6.79, 10.57, 17.08 | |
Reverse | 1.29, 5.22 | ||
Rotary tiller | Transmission Type | Middle Gears Transmission, or side gears transmission | |
Width | 1000mm Adjustable | ||
Number of blades | 18-20pcs | ||
Working depth | 150-250mm | ||
Up and down control | Hydraulic system |
###
Model | LS-Small tractor 25hp | ||
Wheel drive | 4×2 | ||
Dimensions | 2700×1400×1400 | ||
Weight(kg) | 950-1010 | ||
Front wheel(mm) | 900,1000,1100,1200 adjustable | ||
Rear wheel(mm) | 960,1000,1100,1200,1300 adjustable | ||
Wheel base(mm) | 1400 | ||
Min. ground distance(mm) | 350 | ||
Gear shift | 6+1 | ||
Tyre size | 9.5-20/500-14 | ||
ENGINE Type | |||
Rated power(kW) | 18.32kw | ||
Rated speed (r/min) | Water cooled,vertical,4 stoke and direct injection | ||
Start | Electric | ||
Transmission | 2200 | ||
Clutch | single ,dry friction, single clutch | ||
Connection/PTO | 3×2+1 | ||
3 point suspension/ Rear P.T.O 540 |
###
MODEL | LS- Middle tractor 50hp | ||
Horsepower&Drive Type | 50hp, 4×4 | ||
ENGINE | |||
Engine Model | 50HP | ||
Type | Vertical, Water-Cooled, Four Strokes, Direct in Injection | ||
Rated Output(kW) | 36.8 | ||
TRACTOR PARAMETER | |||
Dimension L*W*H (mm) | 3558*1500*2245 | ||
Wheel Base (mm) | 1900 | ||
Wheel Tread F/R(mm) | 1060/1100 | ||
Min Ground Clearance(mm) | 300 | ||
TRANSMISSION | |||
Gear Shift | 8F+2R | ||
Clutch Type | Dry Single-stage | ||
RUNNING SYSTEM | |||
Tire F/R | 650-16/11.2-24 | ||
Steering | Hydraulic Steering | ||
Brake | Toe Type | ||
Park Brake | Latch Pedal | ||
WORKING SYSTEM | |||
Hitch | Partial Separated Type, 3-Point hydraulic hitch,Category 1 | ||
Max. Lift Force(N) | ≥6300 | ||
Rear PTO | Rear Rectangle Spline, 6 Teeth, 540/720rpm |
PTO Shaft Safety Chains
PTO shaft is the part of a tractor that helps transfer power from the tractor to the equipment it is hooked to. A PTO shaft is important if you have a tiller or bush hog. The correct PTO shaft size is crucial for both the tractor and the equipment. If the PTO shaft size is not correct for your equipment, it may not work.
>
Safety chains
<br/Safety chains are an essential part of securing your PTO shaft. They prevent a rotating plastic shield from coming loose and causing injury or damage. It is important to protect your PTO and any other drive shafts on your machine. Watch the video below for more information about the dangers of unguarded PTOs.
PTOs are an efficient way to transfer mechanical power between tractors and implements. They helped revolutionize North American agriculture during the 1930s. Despite their convenience, PTOs have also proven to be one of the most common farm machinery hazards. This fact sheet outlines several important PTO safety precautions.
Safety chains for PTO shafts are necessary to protect both tractor and implement from damage. The PTO shaft must be attached properly to the tractor and the implement before starting the equipment. Before operating, be sure that the safety chains are positioned in a way that allows them to fully move. When operating the PTO, avoid being too aggressive as this can damage the drive line and shaft. For further safety, make sure to fit a torque limiter or clutch on the implement end of the PTO shaft.
PTOs are great for plowing, mowing, and shredding, but they also have potential to cause injuries if you don’t use a safety chain. It’s best to get a chain that is long enough to prevent injuries. Also, be sure that the PTO shaft does not compress completely at any point during the operating range. There should be several inches of overlap in the longest operating extension of the PTO.
Another common hazard with PTOs is IID shafts. While many machines and tractors have driveline guards, these are often missing. If you have a PTO with an IID, you should consider installing a safety chain.
Shield
A swingable tractor PTO shaft shield assembly consists of an inverted U-shaped shield member slidably attached to a bracket. It extends above the PTO shaft and has several notches and pins that engage each other. It can be held in a number of positions and can be retracted when not in use. It also includes a cover member that covers the space between the shield and tractor and abuts the raised portion of the shield member.
The PTO shaft shield is typically made of plastic, but it can also be made of metal. Plastic is less likely to break or damage than metal. The shield is supported by a bracket 51 with a curved distal end 57 and a non-metallic guard 59. When used in conjunction with a bracket, a PTO shaft shield should be properly installed to prevent damage to the shaft.
Keeping the PTO shaft shield in good condition is crucial to the safety of your tractor and your workers. An improperly installed PTO shaft shield can result in severe injuries. It may also ensnare or strike people in the vicinity. Proper maintenance will prevent many of these injuries. Equipment manufacturers have made great strides in reducing the risks of PTO mishaps. Operators are also responsible for keeping the shields in good condition. Removing the guards will only increase the risk to the operator.
A PTO shaft shield is a tubular assembly that is mounted on the tractor PTO shaft. It consists of two telescopic pieces that are held in place by shield support bearings. This shield protects the PTO shaft and the universal joints from debris and prevents premature wear. The shield can be easily removed and replaced if necessary.
IID shaft guard
The IID shaft guard is a safety device used to protect PTO powered machinery from the possibility of separating while in use. The shaft, which is a telescoping shaft, is attached to the PTO stub on tractors. The telescopic feature is convenient when moving across uneven ground. However, this type of shaft can cause serious injury if it separates while in use.
The IID shaft guard can prevent these injuries by completely covering the shaft. The guard is made of metal or plastic and rotates along with the shaft. A person can react in less than five tenths of a second, making the IID shaft guard an important part of PTO safety.
PTO shafts rotate at speeds as high as 540 rpm, which is very fast. A limb could be wrapped around the driveline shaft, causing a serious injury or death. Because of the speed of a PTO, it can be difficult for an individual to discern whether it is engaged or not and may not be aware of the danger.
An IID shaft guard should be fitted to every tractor PTO shaft. It should be tested and rotated regularly. It is also important to keep the tractor engine off when working around the PTO shaft. Using a drawbar to protect driveline components is also important. It will prevent stress on the driveline and reduce the possibility of separation.
Overrunning clutch
An overrunning clutch on a PTO shaft is a mechanism that allows the PTO shaft to rotate freely in one direction while restricting the speed of the implement being hauled behind the tractor. This clutch is also useful for preventing the speed of the implement from exceeding the speed of the tractor while slowing down. It comes in two basic configurations, one for a clockwise and the other for a counter-clockwise direction.
Another type of overrun clutch is used on tractors with a PTO driven bush hog. A bush hog has a flywheel and blades that drive the transmission through the PTO shaft. Without an overrunning clutch, these implements would freewheel while the tractor is driving and would potentially break the shaft.
A PTO overrunning clutch prevents power from backfeeding into the transmission, the part that transmits power to the rear wheels. Without an overrunning clutch, the tractor could backfeed power, causing an accident if the blade assembly hits an object. As such, it is essential to use the overrunning clutch to ensure that your tractor will be safe.
Direction of rotation
Despite its name, the direction of rotation of a PTO shaft can change if necessary. Most PTOs have a single-direction rotation, but you can often reverse the direction by installing a reverse PTO adapter. However, you should only use reverse PTOs when absolutely necessary.
A standard PTO rotation direction has been defined by the International Organization for Standardization (ISO). It is considered necessary to adhere to this standard, as improper rotation can cause damage to implements attached to a PTO. This standard helps farmers avoid problems such as ruined implements. While the direction of rotation of a PTO shaft is not always the same for all PTOs, there are some tractors that allow it to rotate both ways, while others have no restrictions.
The direction of rotation of a PTO shaft can be changed by using a hydraulic pump. Another way to connect a PTO is through a “sandwich” type split shaft unit. These units are mounted between the transmission and engine, and they usually receive drive directly from the engine shaft. They can also deliver complete engine power to a PTO. However, you must modify your vehicle’s driveline to install such a split-shaft unit.
editor by czh 2023-01-30
China Hot Seller 100HP 4WD Tractor with Front Loader Farm Tractors pto shaft for bush hog
Merchandise Description
Scorching vendor 100HP 4 wheel drive tractor with front loader Farm Tractor
1. Normal configuration:
Fitted with YTO, Yucahi, or Lovol- 4 Diesel engine, electricity steering, dual clutch, 2 rear hydraulic fobs, sixteen+8 collar change creeper gears, enclosed fan taxi, outer air filter, luxury seat, combine meter, PTO540/1000rpm, agri tyres 11.2-24/sixteen.9-34,
two. Optional devaice:
Air conditioning, heater, sunroof, rops, front and rear ballast, air brake, paddy tyre, huge tyres, 8+4 gears, 540/760 or 760/a thousand rpm PTO, large strain system for lifter, swing drawbar
three. Rewards and Traits of Qianli ninety Series tractors:
Equipped with famous manufacturer engine demonstrating sophisticated capacity, reduced gasoline intake and substantial financial effectiveness.
Reasonable distribution of velocity, large performance in equally farm functioning and transportation.
150L enlarge gasoline tank, making certain lengthy working time.
Double cylinder Sturdy just take-up system, with top limit, sturdy carry drive, reputable and substantial efficiency.
Set up renowned model Clutch, reliable and tough.
16F+8R creeper shift-gears or 16F+8R shuttle change-gears, the shifts matched realistic, have a good agricultural adaptability.
Optional double velocity PTO (Electrical power Get Off): 540/one thousand, 760/1000r/min exhibiting substantial doing work efficiency.
Optional PTO shaft of 6 Spleen, 8 Spleen or 24 Spleen, adaptable for agricultural gear of all over the globe.
Streamlined appearance design, lovely and generous.
Optional luxurious shut drivers cabin, can be outfitted with air-conditioner, heater, CD participant, radio, adjustable comfortable seat, luxurious interior decorations and so on.
4. Our promise:
Top quality very first, credit score topmost
Cost advantage
Ocnvenient a single-end perchase
five. Technical parameter for this 100HP Four wheel drive farm tractor
Model | HH-a thousand/1004 | ||
Dimensions | Length×Width×Height(mm) | 4280×2085×2925 | |
Wheel Tread(mm) | Front Wheel(mm) | 1610-1820(Four wheel drive) 1520-1820(2WD) | |
Rear Wheel(mm) | 1620_2571 | ||
Min.Floor Clearance(mm) | 370-450 | ||
Dry Mass | With Cab(kg) | 3635(2WD) 3785(4wd) | |
With out Cab(kg) | 3420(2WD) 3570(4 wheel drive) | ||
Engine | Trade Mark or Brand | YTO/YUCHAI | |
Engine Model | Vertical Water Cooled 4-stroke | ||
Directly Injection | |||
Number of Cylinder | 4 | ||
Cooling Method Type | Water Cooled | ||
Rated Electricity(kw) | 73.5KW | ||
Max. Torsion(N.M) | 395 | ||
Rated Velocity(r/min) | 2300 or 2400 | ||
Gasoline Tank | Quantity(L) | 150 | |
Transmission System | Clutch | Single,Dry,Twin Stage Type | |
Gear Box | F16+R8/F16+R8(creeper gear) | ||
Differential | Closed 4-planetary Gears | ||
Differential Lock | Mechanical Sliding Sleeve | ||
Braking Method | Damp Double Plate Disc Brake | ||
Running Method | Tyre Design | F/R(2WD) | six.5-20/sixteen.9-34 |
F/R(4wd) | 11.2-24/16.9-34 | ||
Steering Program | Hydraulic Wheel Steering | ||
Working System | Hydraulic Program Kind | Positive lifter | |
Linkage Variety | II Rear Mount 3-level Linkage | ||
PTO(Standard) | φ38,8teeth φ35,6teeth | ||
PTO Pace(r/min) | 540/a thousand | ||
Drawbar Variety | Fixed Drawbar/Swing Drawbar | ||
Optional configuration | |||
Cab | AC | Heater | Air-brake |
Adjustable Seat | Numerous Unit Valve | ROPS | Sunvisor |
Double Crush Lifter | Radio | CD Player | Paddy Tyre |
Bob-weight | Frontballast | 11×20=220kg 20kg/pcs | |
Rearballast | 2×80=160kg 80kg/pcs | ||
Paddy Tyre | F/R | 11.2-24/12.4-24 | |
F/R(optional) | 13.6-28/sixteen.9-34 |
US $19,890 / units | |
3 units (Min. Order) |
###
Type: | Wheel Tractor |
---|---|
Usage: | Farm Tractor |
Certification: | ISO, CE, CCC, ISO/TS16949 |
Drive Wheel: | 4WD |
Emission Standard: | Euro II |
Fuel: | Gas / Diesel |
###
Customization: |
Available
|
---|
###
Model | HH-1000/1004 | ||
Dimensions | Length×Width×Height(mm) | 4280×2085×2925 | |
Wheel Tread(mm) | Front Wheel(mm) | 1610-1820(4WD) 1520-1820(2WD) | |
Rear Wheel(mm) | 1620_2020 | ||
Min.Ground Clearance(mm) | 370-450 | ||
Dry Mass | With Cab(kg) | 3635(2WD) 3785(4WD) | |
Without Cab(kg) | 3420(2WD) 3570(4WD) | ||
Engine | Trade Mark or Brand | YTO/YUCHAI | |
Engine Model | Vertical Water Cooled 4-stroke | ||
Directly Injection | |||
Number of Cylinder | 4 | ||
Cooling System Type | Water Cooled | ||
Rated Power(kw) | 73.5KW | ||
Max. Torsion(N.M) | 395 | ||
Rated Speed(r/min) | 2300 or 2400 | ||
Fuel Tank | Volume(L) | 150 | |
Transmission System | Clutch | Single,Dry,Dual Stage Type | |
Gear Box | F16+R8/F16+R8(creeper gear) | ||
Differential | Closed 4-planetary Gears | ||
Differential Lock | Mechanical Sliding Sleeve | ||
Braking System | Wet Double Plate Disc Brake | ||
Running System | Tyre Model | F/R(2WD) | 6.5-20/16.9-34 |
F/R(4WD) | 11.2-24/16.9-34 | ||
Steering System | Hydraulic Wheel Steering | ||
Working Device | Hydraulic System Type | Positive lifter | |
Linkage Type | II Rear Mount 3-point Linkage | ||
PTO(Standard) | φ38,8teeth φ35,6teeth | ||
PTO Speed(r/min) | 540/1000 | ||
Drawbar Type | Fixed Drawbar/Swing Drawbar | ||
Optional configuration | |||
Cab | AC | Heater | Air-brake |
Adjustable Seat | Multiple Unit Valve | ROPS | Sunvisor |
Double Crush Lifter | Radio | CD Player | Paddy Tyre |
Bob-weight | Frontballast | 11×20=220kg 20kg/pcs | |
Rearballast | 2×80=160kg 80kg/pcs | ||
Paddy Tyre | F/R | 11.2-24/12.4-24 | |
F/R(optional) | 13.6-28/16.9-34 |
US $19,890 / units | |
3 units (Min. Order) |
###
Type: | Wheel Tractor |
---|---|
Usage: | Farm Tractor |
Certification: | ISO, CE, CCC, ISO/TS16949 |
Drive Wheel: | 4WD |
Emission Standard: | Euro II |
Fuel: | Gas / Diesel |
###
Customization: |
Available
|
---|
###
Model | HH-1000/1004 | ||
Dimensions | Length×Width×Height(mm) | 4280×2085×2925 | |
Wheel Tread(mm) | Front Wheel(mm) | 1610-1820(4WD) 1520-1820(2WD) | |
Rear Wheel(mm) | 1620_2020 | ||
Min.Ground Clearance(mm) | 370-450 | ||
Dry Mass | With Cab(kg) | 3635(2WD) 3785(4WD) | |
Without Cab(kg) | 3420(2WD) 3570(4WD) | ||
Engine | Trade Mark or Brand | YTO/YUCHAI | |
Engine Model | Vertical Water Cooled 4-stroke | ||
Directly Injection | |||
Number of Cylinder | 4 | ||
Cooling System Type | Water Cooled | ||
Rated Power(kw) | 73.5KW | ||
Max. Torsion(N.M) | 395 | ||
Rated Speed(r/min) | 2300 or 2400 | ||
Fuel Tank | Volume(L) | 150 | |
Transmission System | Clutch | Single,Dry,Dual Stage Type | |
Gear Box | F16+R8/F16+R8(creeper gear) | ||
Differential | Closed 4-planetary Gears | ||
Differential Lock | Mechanical Sliding Sleeve | ||
Braking System | Wet Double Plate Disc Brake | ||
Running System | Tyre Model | F/R(2WD) | 6.5-20/16.9-34 |
F/R(4WD) | 11.2-24/16.9-34 | ||
Steering System | Hydraulic Wheel Steering | ||
Working Device | Hydraulic System Type | Positive lifter | |
Linkage Type | II Rear Mount 3-point Linkage | ||
PTO(Standard) | φ38,8teeth φ35,6teeth | ||
PTO Speed(r/min) | 540/1000 | ||
Drawbar Type | Fixed Drawbar/Swing Drawbar | ||
Optional configuration | |||
Cab | AC | Heater | Air-brake |
Adjustable Seat | Multiple Unit Valve | ROPS | Sunvisor |
Double Crush Lifter | Radio | CD Player | Paddy Tyre |
Bob-weight | Frontballast | 11×20=220kg 20kg/pcs | |
Rearballast | 2×80=160kg 80kg/pcs | ||
Paddy Tyre | F/R | 11.2-24/12.4-24 | |
F/R(optional) | 13.6-28/16.9-34 |
The Different Parts of a PTO Shaft
Power Take-Off (PTO) shafts are an integral part of a tractor’s driveline. Without them, a tractor cannot operate. It is essential to understand the different parts of a PTO shaft, as they are crucial for the operation of your tractor. These parts are typically overlooked during routine tractor maintenance checks, but knowing more about them will help you practice on farm machinery better.
Tractor’s power take-off (PTO) shaft
A Tractor’s power take-off (or PTO) shaft transfers power from the tractor to an implement. These shafts typically rotate at speeds between 540 and 1000 rpm. A number of safety features help prevent accidental contact between the shaft and the implement.
In order to avoid this problem, tractor operators should be vigilant while operating their tractors. They should make sure that the tractor’s power take-off (PTO) shaft is shielded. These shields include a master shield for the PTO stub, a PTO integral journal shield, and an implement input connection shield. The PTO master shield is mounted on the tractor and extends over the PTO stub on three sides. It is designed to prevent collisions between the tractor and any connected machine drive shaft.
A power take-off (PTO) shaft is an important component on any tractor. It is a shaft that transmits mechanical power from a tractor to an implement or separate machine. Early PTOs used a transmission and were located at the rear of the tractor. They are now available with hydraulic or mechanical drivelines. These power take-offs transfer the tractor’s power to a secondary piece of equipment through a driveshaft.
Proper PTO shaft guards protect people from stepping on rotating shafts. The PTO should not compress fully at any point in the operating range. It should have several inches of overlap at the maximum operating extension. A PTO guard should be positioned properly for each machine.
Despite these benefits, there are still many risks associated with PTO shafts. These powerful and potentially dangerous pieces of machinery can cause severe injury if not used safely. Luckily, proper installation of safety shields can reduce the risk of injury.
Types
PTO shafts come in a variety of different shapes, sizes, and materials. The most common types are square and round, but there are also star-shaped and trilobed types. While the star-shaped type is a typical North American design, the trilobed and lemon-shaped varieties are typically German or Italian. Typically, the lemon-shaped ones are made of an alloy called ‘Lemon Yellow.’ In some cases, the shaft will come with snap rings.
Different manufacturers use various materials for their PTO shafts. The tube of a welded drive shaft must be strong enough to handle the force exerted by the PTO. There are many different materials available, but some are stronger than others. Before choosing the type of drive shaft that is right for your machine, make sure that you know the exact measurements of your driveline.
When deciding between different types of PTO shafts, you must also consider the materials that will be used for your particular application. While splines are the most common material for PTO shafts, you can find various types that have different uses. Carbon steel is malleable and has a low carbon content, which makes it more reliable. A ferrous steel is more durable and contains metals like nickel, chromium, and molybdenum, which make it a great alternative to carbon steel.
A PTO gearbox input shaft extends between the PTO gearbox and the PTO clutch. It is mounted with a toothed wheel 8. An inductive sensor 9 on the shaft outputs a pulsed electronic signal based on the rotational speed of the shaft. These pulsed signals are called inductive speed sensors.
Rotation direction
The PTO shaft is a critical part of the power take-off of a farm tractor. It allows the tractor to transfer power from the engine to an implement such as a mower or other garden equipment. The rotation direction of the PTO shaft depends on the type of implement. Some implements only accept rotation in one direction, while others require rotation in both directions.
Safety chain
One of the best ways to protect your PTO shaft is to use a safety chain. A safety chain is a chain that is attached to the PTO shaft, and it prevents the plastic shield from spinning on the shaft. This chain should be fastened to a suitable point on your machine or tractor. It should not be attached to the lower lift arms or the U-guard.
PTO shafts can be very dangerous if they are not guarded. They can rotate as high as 1000 rpm and could seriously injure you. It is also important to ensure that the PTO shaft guard is fitted correctly, and that the tractor is turned off before working on it. In addition, avoiding wearing loose clothing when working around a PTO shaft can help protect your life.
Another way to protect the PTO shaft is to shield the IID shaft. This can be done by using shielding over the straight part of the shaft, the PTO connection, or the Implement Input Connection. A protruding bolt or pin can catch clothing and snag it. If not shielded, the clothing can wrap around the shaft, trapping the person against it.
A good safety chain should be positioned between the tractor and the PTO shaft. The chain should be at least 50 mm wider than the PTO shaft, and should be in good condition. It should cover the entire length of the PTO shaft from the tractor to the first bearing. The PTO shaft must also be fitted with the correct bearing ring. It is also vital to ensure that the PTO guard does not bend or break, as this could result in damage to the PTO shaft.
Shield
A PTO shaft shield protects the PTO shaft from possible impacts. It is typically made of plastic, but can also be made of metal. These shields are easy to damage, and are therefore preferably made of a durable material. The shields are held in place with brackets. The shields are made with two parts: an inner shield and a protective sleeve.
An improvement to the PTO shaft shield is a bracket that supports both the outer and PTO shaft. It is shown in conjunction with a towed machine in FIGS. 2 and 7. FIG. 7 is a side elevation of the bracket mounted to the tongue of the machine. This shield is designed to prevent the PTO shaft from becoming damaged during the towed process.
The main risk associated with PTO mishaps is entanglement, which can result in serious injuries. If a shaft separates from a tractor, it can strike nearby workers or people. Proper maintenance can minimize the risk of entanglement and save lives. Thankfully, equipment manufacturers have made huge strides in reducing the risk of these accidents. Operators should always make sure that the PTO shaft shield is in place to avoid the risk of entanglement.
In addition to preventing entanglement, a PTO shaft shield also helps protect the universal joints that are mounted on the PTO shaft. The shield is made of plastic or steel. It is typically shaped like an inverted U and covers both the top and sides of the shaft. A detachable PTO shaft shield is also available.
As with all parts of a PTO driveline, the PTO shaft shield should be maintained to prevent damage to the bearings. It is necessary to inspect the shield and replace it whenever it becomes damaged. PTO equipment is often used outdoors, and it is frequently exposed to crop debris, rust, and dirt that can affect the bearings. Proper maintenance will extend the equipment’s lifespan and reduce maintenance costs.
editor by czh 2022-12-27
Best near me shop made in China – replacement parts – PTO shaft manufacturer & factory Greece refurbished drive shafts Hot Sale China Tractors Dq504 50HP 4X4 4WD Agriculture Wheel Garden Compact Mini Farm Tractor with Ce Certificate with ce certificate top quality low price
We – EPG Group the most significant agricultural gearbox and pto factory in China with 5 different branches. For much more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
ford 8n pto shaft Our pto shaft sleeve bushing manufacturing facility quick pto shaft has pto shaft seized obtained fifty two.5 inch driveshaft the j and r driveshaft certificate pto shaft for sale ontario of how to measure pto shaft length China’s 2014 jeep cherokee drive shaft Farm john deere mx6 pto shaft Machinery Goods Good quality Authentication promulgated by the Farm Machinery Products High quality Authentication Centre of China. Primary merchandise include: manure spreading truck, potato planting/harvesting machine, disc plough, disc harrow, grass Mower/slasher, corn and wheat thershers, seeder, mouldboard plow, deep subsoiler equipment, rotary tiller, rear blade, fertilizer spreader, combine rice harvester, corn thresher, farm trailer, ridger, trencher, stubble cleaner, earth auger, cultivator and its components: Plow disc blades, harrowing movie, plough suggestion and share, cultivator tine, casting areas and so forth. Greece sizzling sale China tractors DQ504 50HP 4×4 4 wheel drive Agriculture wheel Backyard garden compact mini farm tractor with CE certificate
Tractor Principal Functions and Rewards:
one.Equipped renowned brand name motor demonstrating sophisticated ability, low fuel usage and high financial effectiveness.
2. Streamlined visual appeal style, lovely and generous.
3.Transmission Circumstance adopt meshed change and include the gearbox interlock system tends to make the operation more efficiently, reliable and less complicated.
four. Double motion clutch with disc spring, complete steadily and straightforward to function.
5. Completely hydraulic steering technique tremendously diminished driver’s work strength.
six. Soaked disc brake device, trustworthy brake performance.
7. Separate injection of hydraulic oil, reputable to run.
8. The lifter with pressure and placement adjustment, with reliable raise.
nine. Tractor PTO:
PTO in Double velocity : 540/one thousand, 760/a thousand, 540/760r/min Optional, For high working efficiency.
PTO shaft of 6 or 8 spline Optional, adaptable for agricultural gear of all over the globe.
10. Entire series light, ROPS,Sunshade/Canopy, Supporter/Heater/Air-conditioned cabin are all available, for much more comfy driving surroundings.
Tractor Principal specificaiton and Technical parameters:
Tractor Product | DQ504 |
Push kind | 4×4 |
Engine | |
Kind of motor | Xinchai 4-Cylinder EPT motor |
Ability of gas tank(L) | 38L |
Motor electrical power at rated speed | 36.8kw / 50HP |
Rated speed (r/min) | 2400 |
Transmission | |
Clutch | dry,twin-stage kind |
PTO speed | 540/1000rpm or 540/760rpm |
Gear shift | 8F+4R/8F+8R/12F+12R (Optional) |
Hydraulic technique | |
Hydraulic output valve | 2-Way (optional) |
Three level linkage | |
Group of 3-level url | rear, category II |
Lifting force (at position of 610mm)KN | twelve |
Technical parameter | |
Overall size (L x W x H)mm | 3513x1750x2130 |
Wheel base (mm) | 2040 |
The smallest clearance (mm) | 325 |
Entrance tire | eight.3-twenty |
Rear tire | twelve.4-28/fourteen.9-24 (optional) |
Optional Configurations | |
ROPS,Cover(Sunshade),Cabin with Fan/Heater/Air-problem, 2-Team Hydraulic output valve, Entrance ballast, Rear ballast,Air brake, 8F+8R/12F+12R Shuttle gearshift,Paddy tire, fourteen.9-24 large rear tire, Swing attract bar. |
DQ504 50HP 4wd tractor depth displaying:
DQ504 50HP 4wd tractor have A variety of Optional configurations for select:
EPT Manufacutring Line:
DQ504 50HP 4 wheel drive Tractor packing and Shipping and delivery transporting:
Higher high quality Tractor have ISO,CE, PVOC COC, CO, etc certificates:
EPT after-sale services for equally Distributors and Personal clients:
Remember to speak to us if you have any need for our Product :
Greatest price tag will be quoted for you as soon as acquire your Need !
Best factory made in China – replacement parts – PTO shaft manufacturer & factory Farm 04 jeep grand cherokee front drive shaft Tractors 4WD and Implements for Tractors with ce certificate top quality low price
We – EPG Team the most significant agricultural gearbox and pto manufacturing facility in China with 5 different branches. For far more information: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
pto shaft for king kutter tiller EPG 2012 f150 driveshaft Equipment driver cv axle is adjustable drive shaft located pto shaft producers in 10 spline pto shaft XiHu tractor pto shaft adapter Area pto shaft vast angle joint HangZhou right cv axle Zhejiang tata indica vista entrance axle price ,China. It is 30km from our manufacturing unit to HangZhou worldwide airport. EPG major manufacturing is of farming 15-five hundred horsepower tractor supporting machinery, mechanical cultivation, harvesting machinery and components. Farm Tractors 4 wheel drive and Implements for Tractors
Specialized Parameter
Model | TL400 | TL404 | TL450 | TL454 | |
Driving Type | 4*2 | 4*4 | 4*two | 4*four | |
Engine | Product | XC490T | XC490T | XC495 | XC495 |
Rated power(kw) | 29.4 | 29.four | 33 | 33 | |
Rated Traction (kN) | 6.eight | nine.five | seven | ten | |
Overall dimension (L*W*H) |
3650×1666×2160 | 3650×1666×2160 | |||
Tread | Entrance(mm) | 1170 | 1340 | 1170 | 1340 |
Rear(mm) | 1300 | 1300 | 1300 | 1300 | |
Wheelbase(mm) | 1905 | 1965 | 1905 | 1965 | |
Weight (kg) | 1530 | 1700 | 1530 | 1700 | |
Tyre | Entrance | five.fifty-16 | 7.50-sixteen | five.fifty-16 | seven.fifty-16 |
Rear | eleven.2-28 | 11.2-28 | 11.2-28 | 11.2-28 | |
PTO(RPM) | 540,760 | ||||
Speed (Km/h) | Forward: 2.32-27.35 Backward: 3.12-twelve.22 |
||||
Others | Front Ballast Weight and 1 layer Rear Ballast Weight,air brake |
||||
CBU, PCS IN A 40’HC | 4 |
Tractor Characteristics
1.Gasoline intake reach upto 1 liter/hour diesel.
two. Differential lock avoid rear whee EPT skidding when climbing, operating in paddy land and rainy climate.
3.Equip with double pace of PTO shaft 540/760 rpm. Adapted to distinct area kind.
4.Adopt full hydraulic steering, independent gasoline tank, simple running and substantial mobility.
5.Adju EPT front and rear tracks meet agricultural demands of diverse places. Extra-large h2o tank and high ability maintenance-free of charge battery make the equipment with very best heat-dispersion and starting up functionality.
six.Can undertake to different implements,this sort of as plough,disc plough,ratory tiller,disc harrow,and so on.
Firm Profile
TANGLAND EPT Organization, is a wholly-owned subsidiary of TANGLAND Team, is the expert firm for Trading & EPT Trade and cooperation. We established up branches in ZheJiang , ZheJiang and HangZhou, as properly as overseas assembling plant, or/and demonstrating place and service centre, in Pakistan, UAE, and some Asian & African international locations. TANGLAND Group is a complete firm including manufacturing, assembling, Casting & Foundry, producing Casting components, Electric Vehicle, Tractor, Light truck, Semi-trailer, Metal ball and Nylon 6 merchandise, Operating an Industrial products’Information & Exchange Platform, the headquarter is in Ji’nan, ZheJiang , and assembling, machining & foundry and castingplants are in HangZhou, HangZhou, HangZhou and HangZhou, theInformation and Trade system named-TANGLANDINFORMATION & Engineering Company. TANGLAND Global.
We are mainly working with the importing and exporting, for Machineries, Cars, Equipments, Building Components, Steel &Iron, Casting Foundry and connected parts & elements, regular Chemical, Nylon 6 products, Medical supplies and consumables, etc., there are our very own 2000 dealers, overseas storages, overseas businesses, our turnover is US dollar 150 Million, with our professional trading crew initiatives, and the eyesight to Create the Value for all the purchasers and sellers.
We export 8000 sets Agricultural machines, 5000 models various light and Medium/weighty obligation vehicles, Semi-trailers, 30,000 sets EPT engine and Generator sets, fifteen,000 tons various Casting parts, this sort of as Pipe and fittings, Housing, and many others., Metal/Iron Balls, ten,000 tons Nylon 6 Cord cloth and Yarn in the yr 2016, we gather a whole lot of advantages for Agricultural machines, Transporting Vehicles, Electrical power equipments, Casting Components and Industrial supplies, and take pleasure in the great advertising and marketing shares in One Belt & One Street nations, accumulate the exporting, advertising and companies activities, located up the Product sales+Services company manner, cooperate with sellers, brokers, fix the challenges in equipment exporting company, e.g., service, spare parts providing, technological supporting, warranty, and many others., and start the assembling and localization in some markets, which strengthen the admit and dependability from clientele and users.
TANGLND Faith: To produce the worth for all the customers is the only cause for TANGLAND existence.
Workshop
Package
Our Provider
Pre-Revenue Provider
1. Inquiry and consulting assist.
2. Sample testing help.
3.See our Factory.
Right after-Product sales Service
one.Education how to put in the machine, training how to use,maintain and repair the equipment.
two.Engineers obtainable to support machinery overseas.
FAQ
Q1.What is your terms of payment?
A:T/T 60% as deposit,and 40% before loading.we will demonstrate you the photos of the merchandise and offers just before you spend the equilibrium.
Q2.What your phrases of supply?
A:EXW,FOB,CFR,CIF,DAF.
Q3.How about your delivery time?
A:Generally,it will just take about 20 days following receipt of deposit payment.The specific shipping time depends on the items and the amount of your buy.
This fall.Are you intrigued in dealership with regional organization?
A:Of course,we are quite fascinated in this business.we’d like to cooperate with some regional companion to offer more tractors in neighborhood industry and supply better provider.
Q5.Do you examination all your tractors ahead of shipping and delivery?
A:Yes,we have 100% tractor take a look at and comprehensive good quality management program ahead of supply.
Q6.How do you make our organization lengthy-term and great partnership?
A:1.We hold excellent high quality,aggressive price and successful support to make certain our customers gain
2.We shield the reward of seller or agent,in specifical time period and region.
Best manufacturer made in China – replacement parts – PTO shaft manufacturer & factory Farm pto drive shaft alignment Tractors 4WD and Implements for Tractors with ce certificate top quality low price
We – EPG Group the most significant agricultural gearbox and pto factory in China with 5 various branches. For much more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
series 4 pto shaft Primary pto stub shaft items farm products pto shaft contain: brz driveshaft manure pto shaft for king kutter tiller spreading 2016 mustang gt driveshaft truck, land delight pto shaft include elimination potato pto coupler repair planting/harvesting how to take away pto shaft for tiller machine, 52853431aa disc plough, disc harrow, grass Mower/slasher, corn and wheat thershers, seeder, mouldboard plow, deep subsoiler machines, rotary tiller, rear blade, fertilizer spreader, merge rice harvester, corn thresher, farm trailer, ridger, trencher, stubble cleaner, earth auger, cultivator and its components: Plow disc blades, harrowing movie, plough suggestion and share, cultivator tine, casting areas etc. The business was licensed by ISO9001:2008 Top quality Management Program. Farm Tractors 4 wheel drive and Implements for Tractors
Specialized Parameter
Model | TL400 | TL404 | TL450 | TL454 | |
Driving Type | four*two | four*4 | 4*two | 4*4 | |
Engine | Design | XC490T | XC490T | XC495 | XC495 |
Rated power(kw) | 29.four | 29.four | 33 | 33 | |
Rated Traction (kN) | 6.8 | nine.five | 7 | ten | |
Overall dimension (L*W*H) |
3650×1666×2160 | 3650×1666×2160 | |||
Tread | Entrance(mm) | 1170 | 1340 | 1170 | 1340 |
Rear(mm) | 1300 | 1300 | 1300 | 1300 | |
Wheelbase(mm) | 1905 | 1965 | 1905 | 1965 | |
Weight (kg) | 1530 | 1700 | 1530 | 1700 | |
Tyre | Entrance | 5.50-sixteen | 7.50-16 | five.50-16 | seven.50-16 |
Rear | 11.2-28 | eleven.2-28 | 11.2-28 | eleven.2-28 | |
PTO(RPM) | 540,760 | ||||
Speed (Km/h) | Forward: 2.32-27.35 Backward: 3.12-12.22 |
||||
Others | Front Ballast Weight and 1 layer Rear Ballast Weight,air brake |
||||
CBU, PCS IN A 40’HC | 4 |
Tractor Features
one.Gasoline use attain upto 1 liter/hour diesel.
two. Differential lock avoid rear whee EPT skidding when climbing, working in paddy land and wet temperature.
three.Equip with double pace of PTO shaft 540/760 rpm. Tailored to distinct field variety.
four.Adopt total hydraulic steering, independent gas tank, effortless operating and substantial mobility.
five.Adju EPT entrance and rear tracks fulfill agricultural wants of different areas. Added-huge drinking water tank and higher ability maintenance-free battery make the device with ideal heat-dispersion and beginning performance.
six.Can adopt to different implements,this kind of as plough,disc plough,ratory tiller,disc harrow,and so on.
Business Profile
TANGLAND EPT Business, is a wholly-owned subsidiary of TANGLAND Team, is the specialist organization for Buying and selling & EPT Exchange and cooperation. We established up branches in ZheJiang , ZheJiang and HangZhou, as properly as overseas assembling plant, or/and displaying space and service centre, in Pakistan, UAE, and some Asian & African nations. TANGLAND Team is a comprehensive company including manufacturing, assembling, Casting & Foundry, producing Casting elements, Electric Car, Tractor, Mild truck, Semi-trailer, Metal ball and Nylon 6 merchandise, Operating an Industrial products’Information & Exchange Platform, the headquarter is in Ji’nan, ZheJiang , and assembling, machining & foundry and castingplants are in HangZhou, HangZhou, HangZhou and HangZhou, theInformation and Trade platform named-TANGLANDINFORMATION & Technologies Business. TANGLAND Intercontinental.
We are primarily dealing with the importing and exporting, for Machineries, Vehicles, Equipments, Constructing Components, Steel &Iron, Casting Foundry and relevant parts & factors, regular Chemical, Nylon 6 items, Health care provides and consumables, and many others., there are our own 2000 sellers, overseas storages, overseas firms, our turnover is US greenback one hundred fifty Million, with our professional investing group endeavours, and the eyesight to Create the Value for all the consumers and sellers.
We export 8000 sets Agricultural machines, 5000 models various light and Medium/hefty obligation trucks, Semi-trailers, thirty,000 sets EPT engine and Generator sets, fifteen,000 tons numerous Casting parts, such as Pipe and fittings, Housing, etc., Metal/Iron Balls, 10,000 tons Nylon 6 Cord fabric and Yarn in the year 2016, we gather a good deal of benefits for Agricultural equipment, Transporting Vehicles, Electrical power equipments, Casting Areas and Industrial resources, and appreciate the great marketing and advertising shares in One Belt & 1 Street countries, accumulate the exporting, marketing and providers ordeals, identified up the Income+Provider company mode, cooperate with sellers, agents, remedy the challenges in machines exporting enterprise, e.g., services, spare parts giving, technological supporting, guarantee, and many others., and start the assembling and localization in some markets, which strengthen the acknowledge and trustworthiness from clients and users.
TANGLND Faith: To generate the benefit for all the customers is the only explanation for TANGLAND existence.
Workshop
Package
Our Services
Pre-Revenue Services
one. Inquiry and consulting assist.
2. Sample screening help.
3.Check out our Manufacturing facility.
After-Revenue Service
1.Education how to put in the machine, education how to use,sustain and repair the device.
2.Engineers available to support machinery overseas.
FAQ
Q1.What is your conditions of payment?
A:T/T sixty% as deposit,and 40% ahead of loading.we will demonstrate you the pictures of the merchandise and deals just before you spend the harmony.
Q2.What your conditions of shipping and delivery?
A:EXW,FOB,CFR,CIF,DAF.
Q3.How about your supply time?
A:Normally,it will get about twenty days soon after receipt of deposit payment.The distinct shipping and delivery time relies upon on the things and the amount of your buy.
Q4.Are you intrigued in dealership with nearby firm?
A:Yes,we are very fascinated in this organization.we would like to cooperate with some local partner to sell far more tractors in nearby marketplace and supply much better support.
Q5.Do you take a look at all your tractors prior to shipping and delivery?
A:Yes,we have 100% tractor check and total high quality handle method ahead of supply.
Q6.How do you make our enterprise lengthy-expression and excellent romantic relationship?
A:1.We hold great quality,aggressive price and successful service to make sure our consumers benefit
2.We safeguard the reward of supplier or agent,in specifical period and region.
210HP manufacturer made in China – replacement parts – e36 driveshaft 4WD Big Horsepower Farming Wheel Machinery Tractors Tractor with ce certificate top quality low price
We – EPG Team the biggest agricultural gearbox and pto factory in China with 5 diverse branches. For much more information: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
pto spline extender The th400 driveshaft firm hsn code of pto shaft was rhino mower pto shaft certified pto shaft knuckle by pto shaft adaptor ISO9001:2008 a and l push shafts Good quality pto shaft roll pin Management 2006 chrysler pacifica push shaft Method. 2007 cadillac cts generate shaft Our factory has obtained the certificate of China’s Farm Machinery Merchandise Quality Authentication promulgated by the Farm Equipment Items High quality Authentication Centre of China.
210hp 4 wheel drive Massive Horsepower/Farming/Wheel/Equipment Tractors/Tractor
1.YTO/Weichai/Yuchai Engine
two.Travel Wheel:4 wheel drive(4*4)
3.4-stroke engines with higher torque reserve.
four.Adju EPT front and rear tracks.
five.Entire hydraulic steering.
Technical Parameters
Tangland TL2104 Tractor | |||
Item | Device | Requirements | |
Whole Vehicle |
Manufacturer | / | Tangland |
Product | / | TL2104 | |
Travel | / | 4*four | |
Function | / | Agricultural | |
Overall dimension (L*W*H) | 5350×2320×3140 | ||
Wheelbase | mm | 2898 | |
Tread(Front/Rear) | mm | 1650,1760(1778,1862,1888,1972,1990,2100)/1650-2368,1750 | |
Tread adjustment method | / | Rim flip / Rim flip + slide adjustable | |
Min.GroundClearance(mm) | mm | 480 | |
Fat | kg | 6600 | |
Front / Rear Axle Mass | kg | 2610/3990 | |
Maximum counterweight (Front / Rear) | kg | 500/600 | |
Number of gears (forward / Backward / Craw) | / | 32F+24R(Optional16F+12R) | |
Engine and clutch connection | / | Immediate | |
Starting method | / | Electric start | |
PTO(RPM) | rpm | 540/a thousand | |
PTO Shaft Spline | mm | – | |
PTO Shaft Output | kW | ≥130.nine | |
Tyre(Front/Rear) | / | 16.9-28/20.8-38 | |
Clutch Type | / | Single blade,dry,single function, dog-engagement, Air aid hydrostatic pedal driven | |
Gear Box | / | Straight and helical teeth gear transmission, composed, Synchronizer and meshing gear shift, side operation. |
|
Max. Traction | kN | ≥60 | |
Cabin | Product | / | T15040045001 |
Kind | / | Safety cab | |
Engine | Manufacturer | / | Weichai Deutz engine |
Sort | / | Inline, four-stroke, supercharged cold, high pressure common rail | |
Design | / | WP6G210E330 | |
Aspiration | / | Boost | |
Cylinder | PCS | six | |
Bore * stroke | mm | 105×130 | |
Displacement | L | six.75 | |
Compression ratio | / | 18:01 | |
Calibration power | kW | 154 | |
Calibration speed | r/min | 2200 | |
Fuel injection pump type, model | / | BOSCH/WPCPN2 | |
Nozzle type, model | / | BOSCH/WPCRIN2 | |
Air filter type, model | / | 93 dust filter | |
Starter model | / | M100R2004SE | |
Cooling system type | / | Water Cooled |
Tractor Functions
one.Gas usage achieve upto 1 liter/hour diesel.
2. Differential lock avoid rear whee EPT skidding when climbing, operating in paddy land and rainy temperature.
three.Equip with double speed of PTO shaft 540/760 rpm. Adapted to diverse subject type.
4.Undertake total hydraulic steering, unbiased fuel tank, easy running and large mobility.
5.Adju EPT front and rear tracks satisfy agricultural wants of different regions. Further-big h2o tank and high ability routine maintenance-totally free battery make the device with ideal warmth-dispersion and starting performance.
six.Can undertake to a variety of implements,this kind of as plough,disc plough,ratory tiller,disc harrow,etc
Our Major Products
Tractor
18HP-240HP, 2WD and 4wd, belt travel and shaft travel tractor
one. Suitable for street transportation, different farmland operations: style distinct manner EPT in accordance to distinct terrains such as paddy fields, dry land, mountains, orchards, hills, and so on.
two. Can be geared up with all types of mechanical gear and agricultural machinery: front loader, rear excavator, bulldozer, snowplow, and so forth. plow, hoe, rotary tiller, lawn mower, etc.
Farm Implements
Disc Plough, Disc Harrow,Mover/Slasher,Farm Trailer,Potato Planter,Potato Harvester,Land Leveller, Cultivator,Rotary Tiller/Rotocultivator,Share Plough,Soil Ridger,Seeder,Sprayer, Submit Gap Digger,Raker,Hay Rake,Seedbed Equipment,Corn Thresher,Ditcher, Rock Picker,Swather and and many others..
Packaging&Shipping and delivery
Support
Pre-sales services
1, 24 hrs on the web .Your inquiry will be fast reply by electronic mail .
two,Skillfully and patiently introduction,detai EPT photos and working video to demonstrate device .
3,Visting our manufacturing unit.
Support on sales
one,Take a look at every device and examine the equipment significantly .
2,Send out the machine picture which you purchase , then packing it with stHangZhourd export deal after you affirm the device is okay .
three,Shipping and delivery:If ship by sea .right after supply to seaport .Will notify you the transport time and arrival time . Finally, ship all unique paperwork to you by Categorical. We will explain to you the monitoring number after we put up the documents.
Right after-sales service
one, 24 hours online to resolve any issue . Supply you English guide book and complex assistance , maintain and set up video clip to aid you solve the dilemma, or dispatch employee to your manufacturing unit.
two Instruction how to install the equipment, education how to use, preserve and fix the device.
FAQ
1. What is the voltage/stage for this equipment ?
220V 50Hz/single period ,380V 50Hz/a few stage .We also could create in accordance to customer’s requirement.
two. What is your conditions of payment?
T/T 30% as deposit, and &70% just before shipping and delivery. We will demonstrate you the photos of the items and deals just before you spend the harmony.
three. What your phrases of shipping?
EXW,FOB,CFR,CIF,DAF.
4. How about your shipping and delivery time?
Typically, it will just take about thirteen times right after receipt of deposit payment. The distinct delivery time relies upon on the products and the amount of your purchase.
5. What’s your MOQ?
one established
six. How need to I do if meet up with some trouble although utilizing?
We can source English manual ebook and also consider a video for demonstrating how to solve the problems or dispatch our worker to your manufacturing facility.