Product Description
High quality farm machinery DQ1104 CZPT 110HP 6 cylinder diesel engine TD big chassis Agricultural farming wheel tractor with ISO CE CO PVOC COC certificate
Tractor Main Features and Advantages:
1.Equipped famous brand engine showing advanced capacity,low fuel consumption,high economic efficiency.
2. Streamlined appearance design, beautiful and generous.
3.Transmission Case adopt meshed shift and add the gearbox interlock device makes the operation more smoothly,reliable and easier.
4. Double action clutch with disc spring, perform steadily and easy to operate.
5. Fully hydraulic steering system greatly reduced driver’s work strength.
6. Wet disc brake device, reliable brake performance.
7. Separate injection of hydraulic oil, reliable to operate.
8. The lifter with force and position adjustment, with reliable lift.
9. Tractor PTO:
PTO in Double speed : 540/760r/min Optional, For high working efficiency.
PTO shaft of 6 or 8 spline Optional, adaptable for agricultural equipment of all over the world.
10. Big Chassis and Heavy-duty Rear axle for Durable Strong machine.
11. Full series light, ROPS,Sunshade/Canopy, Fan/Heater/Air-conditioned cabin are all available, for more comfortable driving environment.
Tractor Main specificaiton and Technical parameters:
| Tractor Model | DQ1104 |
| Drive type | 4×4 |
| Engine | |
| Engine type | YTO or CZPT brand, 4 cylinder diesel engine |
| Capacity of fuel tank(L) | 150 |
| Rated speed (r/min) | 2300 |
| Engine power at rated speed(kw/hp) | 81kw/110HP |
| Transmission | |
| Clutch | Dry,Dual-stage type |
| PTO Speed (rpm) | 540/1000 or 760/1000 |
| Gear shift | 8F+4R/16F+8R(optional)/8F+8R(optional) |
| Hydraulic system | |
| Hydraulic output valve | 2-Group (optional) |
| Three point linkage | |
| Category of 3-point link | Category II |
| Lifting force @ point of 610mm) KN | >18 |
| Technical parameter | |
| Dimension (LxWxH) (mm) | 4593x2050x2810 |
| Wheel base(mm) | 2195 |
| Track base(mm) front wheel | 1610 |
| Track base(mm) rear wheel | 1620-2571 (usual 1620) |
| The smallest clearance(mm) | 379 |
| Front tyre | 11.2-24 |
| Rear tyre | 16.9-34(common)/18.4-30(optional) |
| Optional Configurations | |
| Common cabin with Fan; Heater cabin; AC cabin; ROPS; Canopy (Sunshade); 8F+8R shuttle gearshift, 16F+4R creeper gearshift, 2-Group Hydraulic output valve; Front ballast, Rear ballast; Paddy tire, 7.5-16 front tire, 18.4-30 big rear tire, 6 cylinder diesel engine, Heavy-duty rear, Air brake, Swing draw bar | |
| Loading Quantity/40HC | 3 Sets in Nude packing for CBU shipping |
DQ1104 110HP 4WD Tractror showing :
DQ1104 110HP 4WD Tractor have different optional configurations for choose :
Advance Manufacutring Line:
Strictly Inspecting and Full Testing for ensuring high quality product:
Tractor Packing and Loading container for Delivering goods :
Various Transport modes and Delivery term to meet different customers demand :
Best price will be quoted for you as soon as receive your Requirement !
| After-sales Service: | Factor Directly Supply |
|---|---|
| Warranty: | 2 Years |
| Type: | Wheel Tractor |
| Usage: | Farm Tractor, Garden Tractor, Lawn Tractor |
| Certification: | ISO, CE, CCC, Pvoc, Coc |
| Drive Wheel: | 4WD |
| Customization: |
Available
| Customized Request |
|---|
What Is a PTO Shaft?
A PTO shaft is a component that is important for a power take-off (PTO) tractor. There are many different kinds of PTOs, including Italian, German, and North American types. The types are categorized into different series, which will have different features such as bearing diameter, cap-to-cap length, and snap rings.
Power Take-Off (PTO) shaft
A PTO shaft is a high-speed working shaft that provides torque and lift. This is an advantage for machines that lift and lower loads and are often used on construction sites. Often, the operating elements are located outside of the operator’s cabin. A safety system is also present that allows the PTO shaft to automatically disengage if it is not turned on.
A safety retaining band 12 is used to secure the PTO shaft. The retaining band extends axially from the PTO shaft S and includes a hinge. The band may be adjustable in width to ensure a correct clearance from the PTO shaft. If necessary, it may also be secured with a conventional over-center clamp.
The power-take-off (PTO) shaft is a crucial part of a tractor. Understanding how power is transferred from the tractor’s engine to the implement requires a better understanding of how this shaft works. The torque and speed of the PTO shaft is essential to developing and utilizing the power of the tractor. There are many ways to measure torque and speed at the PTO shaft, including using a telemetry or encoder system.
A Power Take-Off (PTO) shaft safety retainer is an inexpensive, dependable, and fully effective device that protects the PTO shaft from entanglement. Its effectiveness will become clear after reading the specification. A power take-off shaft safety retainer is not difficult to install and is a good choice for many applications.
PTO shafts have a dangerous tendency to separate from the driven machinery. This poses a safety hazard because the PTO shaft can continue to whip around while the operator is driving the machine. Additionally, it can be very difficult for the operator to reach the power plant when operating PTO-driven equipment.
Safety chain
The safety chain on your PTO shaft is an important component of your tractor’s safety system. A properly guarded PTO can prevent entanglement with people, tools, and objects. Moreover, it reduces the risk of the PTO shaft becoming detached from the tractor. It also prevents people from stepping over the rotating shaft.
When not guarded, a PTO shaft is extremely dangerous. It can cause serious injuries and even death. Proper safety chains can prevent this from happening and protect livestock from damage to the PTO shaft. If you’re looking to purchase a safety chain for your PTO shaft, be sure to get one that fits tightly.
When properly attached, a safety chain can keep the shaft from swinging when the PTO is engaged. A 540-rpm PTO shaft will make more than two complete revolutions in less than five seconds. That means it can wrap someone in five tenths of a second. And if you try to pull away, you’ll get wrapped even tighter!
Another reason to use a safety chain is to prevent injury from clothing getting caught in the drive shaft. A jacket or a sweater can entangle itself around the PTO shaft and cause a serious injury. The clothing can also trap the injured limb against the shaft. Hence, the chain should be removed as soon as possible after the operation is completed.
A safety chain is an essential part of your tractor’s safety system. It prevents an accident from happening because of improper maintenance. A poorly maintained PTO shaft can result in severe injuries or even death. Properly installed and maintained safety chain can help you prevent any kind of PTO shaft accident.
Universal joint
A bad universal joint can cause a number of problems for your tractor or implement. These issues may include squeaking or clunking noises when you shift gears, or a shuddering sensation when you brake. If you notice any of these symptoms, it is best to take your vehicle to a mechanic right away for a thorough inspection. If not fixed properly, a bad universal joint can separate from the drive shaft and cause major damage to the tractor or implement.
In order to choose the proper universal joint, you must consider the size of your PTO shaft. Some implements have a diameter of 14 inches or more from the hitch point to the end of the input shaft. The longer distance helps prevent the PTO shaft from bottoming out when making sharp turns. It also prevents the two parts of the shaft from detaching during cornering.
Universal joints are used in agricultural and forestry equipment and other vehicles with large number of rotors. They can be made of different materials. The most common is steel or stainless steel. This material can last for many years. A universal joint is an excellent option for small tractors, lawn mowers, and other agricultural equipment.
The universal joint is also very useful when coupling or extending drive lines. It comes with 2 yokes and a cross kit. The yokes measure 6 x 13/8″ spline, while the cross kit measures 30,2 x 92 mm. The universal joint is made to withstand extreme temperatures. It can be easily disassembled and serviced if necessary.
Square rigid shaft
Torsion is a property of a mechanical system that is affected by changes in torsional rigidity. Torsional rigidity is measured as the torque needed to twist one unit of angular measurement over one unit of length. A shaft with high torsional rigidity will provide a stable mechanical interface.
Different shafts may have different types of collars. The most basic one is a sleeve, which is composed of a thick tube with the same diameter as the shaft. The sleeve is attached to each end of the shaft and has threaded inserts to prevent longitudinal movement.
The PTO shaft also has a safety shield on both ends. It helps to prevent accidents by securing equipment to the tractor. It can be found in domestic and metric shapes. The domestic versions are generally round and domestic shaped, while metric versions are available in a bell, football, star, and metric shape.
An CZPT coupling consists of three pieces: a center plastic disc, two encompassing discs, and a flange. These parts are joined together with a ring that is screwed to the shaft. Some couplings feature oil injection points on the coupling. These can supply oil under pressure to the coupling’s annular grooves. This helps it ‘float’ and aids in the removal.
Another type of flexible coupling is the universal joint. These couplings can be made from a variety of materials, such as rubber, braided metal wire, or woven wire. They can be fabricated to withstand various misalignments. But, unlike rigid couplings, flexible couplings are susceptible to shock and vibration.
Economy PTO
Economy PTO shafts are designed to reduce the overall torque and power consumption of a tractor. They can be manually adjusted to engage and disengage the PTO. The cab mounted control/monitoring unit 14 has a switch 19 that selects between the economy and normal driving modes of the PTO. Using the economy mode decreases the engine rpm while using a lower gear ratio to drive the PTO shaft.
Economy PTO shafts come in hydraulic and mechanical versions. Both types are suitable for agricultural tractors. They allow the tractor to operate at a lower rpm, which reduces noise and vibration. They can also be used in a wide range of equipment. The transmission PTO is the oldest type, and is directly connected to the transmission. When the clutch is engaged, it drives the transmission.
Standard PTO shafts are available in various diameters, splines, and speeds. Many implements are designed to be compatible with one or more of these types of PTO shafts. The domestic versions come with a splined front shaft and a square, rectangle, or round secondary shaft.
Another difference between the two types is the number of teeth on the toothed wheel. The economy PTO allows the tractor to run at a lower rpm than the standard PTO. The engine rpm can go as low as 1600 while using the economy PTO. It also helps to reduce noise and vibration in the cab.
The present invention solves these issues and provides an increased level of automation and operator awareness of the PTO function. It also includes a system for detecting the type of PTO shaft and automatically setting the parameters of the control routine.
editor by CX 2023-05-10
China 35HP 30HP 40HP 60HP Compact Farming Equipment Agricultural Small Tractors 50HP Mini 4X4 4WD Agricol Agriculture Farm Tractor pto shaft at tractor supply
Merchandise Description
Our Benefits
Sales rank:China’s top a few.
Sample: Assist sample order.
OEM: Assist specialized changes.
Cost-free teach: plant coaching on installation and maintenance tactics.
QC: Quality inspection prior to shipping for every single unit.
Our Catalog
Product Description
| We have numerous versions about the device, if you are interested, we will deliver the catalogue and specifics for you, please ship the enquiry.thanks. |
Our have numerous types 4 wheel tractor of power.#12HP #15HP #18HP #20HP #22HP #25HP #28HP #30HP #35HP #40HP #45HP #50HP #60HP #70HP.
Farm tractor diesel engine has basic and compact construction, manipulate, mild bodyweight, can be commonly utilized for a variety of subject. like small farmland, vineyards, flower backyard garden, greenhouse notably ideal for mountainous area.
HangZhou LANSU TRACTOR
#12HP #15HP #18HP #20HP #22HP #25HP #28HP #30HP #35HP ,
multifunction, reliable quality, reasonably priced
Can be equipped with variety of agricultural tools for distinct farming works
Renowned and substantial-quality engine, improve chassis, robust energy
Energy emission upgrade, more advanced efficiency, low gas consumption, high reliability
Simple operation, number of upkeep
Can design and style and create the tractors in OEM
Multi cylinder tractor
#25HP #28HP #30HP #35HP #40HP #45HP #50HP #60HP #70HP.
HangZhou Lansu ,tractor use popular s brand entrance push axle so that top quality is highly reputable.
Adopting a new kind of substantial force lifter makes the function more handy and flexible.
Equipped with exterior double oil cylinders, the functioning influence is better.
Solution Parameters
| MODEL | LS-Mini tractor 12hp | ||
| Engine | Model | 195 | |
| Type | 1cylinder,4-stroke,horizontal,water-cooled,diesel | ||
| Cooling Mode | Condenser (Radiator) | ||
| Power | 12hp | ||
| Combustion System | Direct Injection | ||
| Cylinder Bore | 92mm | ||
| Piston Stroke | 95mm | ||
| Compression Ratio | eighteen:01 | ||
| Rated Speed | 2400rpm | ||
| Fuel Efficiency: | ≤257gl/kw.hr | ||
| Displacement | .632 | ||
| Fuel Tank Capacity | 8L | ||
| Water Tank Capacity | 2L | ||
| Net Weight | 112kg | ||
| Gross Weight | 122 | ||
| Overall dimensions:(L×W×H) | 2140×905×1175mm Without tiller | ||
| Overall dimensions:(L×W×H) | 2600×1000×1175mm With tiller | ||
| Front wheel size | 5.00-12 | ||
| Back wheel size | seven.fifty-16 | ||
| Ground clearance | 180mm | ||
| Working weight | 490kg | ||
| Transmission style | Belt transmission | ||
| Steering style | Steering wheel power steering system | ||
| Brakes | Two side wheel brake | ||
| Starter | Electric start/Hand crank | ||
| Seat | Adjustable | ||
| Gear style | (3+1)*2 6 Forward, 2 Reverse | ||
| Speed | Forward | one.sixty eight, 2.sixty one, 4.22, 6.seventy nine, 10.57, 17.08 | |
| Reverse | 1.29, 5.22 | ||
| Rotary tiller | Transmission Type | Middle Gears Transmission, or side gears transmission | |
| Width | 1000mm Adjustable | ||
| Number of blades | 18-20pcs | ||
| Working depth | one hundred fifty-250mm | ||
| Up and down control | Hydraulic system | ||
| Design | LS-Modest tractor 25hp | ||
| Wheel push | 4×2 | ||
| Dimensions | 2700×1400×1400 | ||
| Weight(kg) | 950-1571 | ||
| Front wheel(mm) | 900,1000,1100,1200 adjustable | ||
| Rear wheel(mm) | 960,a thousand,1100,1200,1300 adjustable | ||
| Wheel foundation(mm) | 1400 | ||
| Min. ground distance(mm) | 350 | ||
| Equipment change | six+one | ||
| Tyre dimension | nine.5-twenty/five hundred-fourteen | ||
| Motor Type | |||
| Rated power(kW) | 18.32kw | ||
| Rated speed (r/min) | Drinking water cooled,vertical,4 stoke and direct injection | ||
| Commence | Electrical | ||
| Transmission | 2200 | ||
| Clutch | single ,dry friction, solitary clutch | ||
| Link/PTO | 3×2+one | ||
| 3 position suspension/ Rear P.T.O 540 | |||
| Model | LS- Center tractor 50hp | ||
| Horsepower&Push Variety | 50hp, 4×4 | ||
| Motor | |||
| Engine Product | 50HP | ||
| Sort | Vertical, Water-Cooled, Four Strokes, Immediate in Injection | ||
| Rated Output(kW) | 36.eight | ||
| TRACTOR PARAMETER | |||
| Dimension L*W*H (mm) | 3558*1500*2245 | ||
| Wheel Base (mm) | 1900 | ||
| Wheel Tread F/R(mm) | 1060/1100 | ||
| Min Ground Clearance(mm) | three hundred | ||
| TRANSMISSION | |||
| Gear Shift | 8F+2R | ||
| Clutch Type | Dry One-stage | ||
| Running Technique | |||
| Tire F/R | 650-16/eleven.2-24 | ||
| Steering | Hydraulic Steering | ||
| Brake | Toe Sort | ||
| Park Brake | Latch Pedal | ||
| Operating Technique | |||
| Hitch | Partial Divided Type, 3-Level hydraulic hitch,Classification one | ||
| Max. Lift Pressure(N) | ≥6300 | ||
| Rear PTO | Rear Rectangle Spline, 6 Enamel, 540/720rpm | ||
Accessories and Resources
Farming instruments for Farm tractor
Farm tractor is a all-powerful agricultural machinery.lt can help farmers land consolidation (plought,rotary tillaqe, scarification,ditching,ridqing, earth up,grass mower Paddy subject beating and so forth).
Crop planting and seeders (wheat, , corn, soybean seed, peanut, planting potatoes, veggies eto Harvest (rice, wheat harvest, corn , peanut, potatoes, sweet potato Onions, ginger, qarlic).
The other administration of land, drinking water, spray, fertilization, paddy area operation and many others).
Packaging & Shipping and delivery
Firm Profile
With a lot more than 20 years of sector encounters, our worldwide trade headquarters found in port town -HangZhou, machines produced in HangZhou, HangZhou, HangZhou, ZheJiang China. There are 7 series with in excess of sixty various of farming machines offered like electricity tiller, walking tractor, 4 wheel tractor, spray machine, thresher and supporting farm resources,these kinds of as rotary tiller,plow,harrow,entrance loader,backhoe,grass bander, trailer,pump,corn planter,corn harvester and reaper. Presently passed the intercontinental certification agency -S G S certification,technological person can be despatched abroad. In the subject of farming equipment,we can meet up with varied buyer wants by advanced technological innovation and most well-known agricultural device.Exported to far more than forty countries especially South The usa,eastern Europe,center the us and we are top quality provider of help to agricultural machinery task in africa. with prefect One-cease agricultural equipment products service system we get wonderful track record. We are dedicated to producing benefit for our clients and our purpose is to permit farmers in the entire world to enjoy reliable, high quality, cost-effective full set of agricultural devices.
three. Our commitments:
a. With us, your funds is protected.
b. At least 12 months guarantee, quality inspection ahead of cargo.
c. Factory direct provide farming equipment and support you earning more cash.
d. Near the port, rapid creation and with out M O Q, on time supply.
e. OEM offered, offering customized feature equipment to enlarge market place share.
f. Fast solution in 10 minutes.
Inexpensive value, reputable high quality, enjoys farming.
|
US $3,500-8,000 / Piece | |
1 Piece (Min. Order) |
###
| After-sales Service: | Warranty |
|---|---|
| Warranty: | 1 Year |
| Type: | Wheel Tractor |
| Usage: | Farm Tractor |
| Certification: | ISO, CE, EPA, CCC, ISO/TS16949, EEC, XQC, Customer Requirement |
| Drive Wheel: | 4WD |
###
| Samples: |
US$ 2200/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| We have many models about the machine, if you are interested, we will send the catalogue and details for you, please send the enquiry.thanks. |
###
| MODEL | LS-Mini tractor 12hp | ||
| Engine | Model | 195 | |
| Type | 1cylinder,4-stroke,horizontal,water-cooled,diesel | ||
| Cooling Mode | Condenser (Radiator) | ||
| Power | 12hp | ||
| Combustion System | Direct Injection | ||
| Cylinder Bore | 92mm | ||
| Piston Stroke | 95mm | ||
| Compression Ratio | 18:01 | ||
| Rated Speed | 2400rpm | ||
| Fuel Efficiency: | ≤257gl/kw.hr | ||
| Displacement | 0.632 | ||
| Fuel Tank Capacity | 8L | ||
| Water Tank Capacity | 2L | ||
| Net Weight | 112kg | ||
| Gross Weight | 122 | ||
| Overall dimensions:(L×W×H) | 2140×905×1175mm Without tiller | ||
| Overall dimensions:(L×W×H) | 2600×1000×1175mm With tiller | ||
| Front wheel size | 5.00-12 | ||
| Back wheel size | 7.50-16 | ||
| Ground clearance | 180mm | ||
| Working weight | 490kg | ||
| Transmission style | Belt transmission | ||
| Steering style | Steering wheel power steering system | ||
| Brakes | Two side wheel brake | ||
| Starter | Electric start/Hand crank | ||
| Seat | Adjustable | ||
| Gear style | (3+1)*2; 6 Forward, 2 Reverse | ||
| Speed | Forward | 1.68, 2.61, 4.22, 6.79, 10.57, 17.08 | |
| Reverse | 1.29, 5.22 | ||
| Rotary tiller | Transmission Type | Middle Gears Transmission, or side gears transmission | |
| Width | 1000mm Adjustable | ||
| Number of blades | 18-20pcs | ||
| Working depth | 150-250mm | ||
| Up and down control | Hydraulic system | ||
###
| Model | LS-Small tractor 25hp | ||
| Wheel drive | 4×2 | ||
| Dimensions | 2700×1400×1400 | ||
| Weight(kg) | 950-1010 | ||
| Front wheel(mm) | 900,1000,1100,1200 adjustable | ||
| Rear wheel(mm) | 960,1000,1100,1200,1300 adjustable | ||
| Wheel base(mm) | 1400 | ||
| Min. ground distance(mm) | 350 | ||
| Gear shift | 6+1 | ||
| Tyre size | 9.5-20/500-14 | ||
| ENGINE Type | |||
| Rated power(kW) | 18.32kw | ||
| Rated speed (r/min) | Water cooled,vertical,4 stoke and direct injection | ||
| Start | Electric | ||
| Transmission | 2200 | ||
| Clutch | single ,dry friction, single clutch | ||
| Connection/PTO | 3×2+1 | ||
| 3 point suspension/ Rear P.T.O 540 | |||
###
| MODEL | LS- Middle tractor 50hp | ||
| Horsepower&Drive Type | 50hp, 4×4 | ||
| ENGINE | |||
| Engine Model | 50HP | ||
| Type | Vertical, Water-Cooled, Four Strokes, Direct in Injection | ||
| Rated Output(kW) | 36.8 | ||
| TRACTOR PARAMETER | |||
| Dimension L*W*H (mm) | 3558*1500*2245 | ||
| Wheel Base (mm) | 1900 | ||
| Wheel Tread F/R(mm) | 1060/1100 | ||
| Min Ground Clearance(mm) | 300 | ||
| TRANSMISSION | |||
| Gear Shift | 8F+2R | ||
| Clutch Type | Dry Single-stage | ||
| RUNNING SYSTEM | |||
| Tire F/R | 650-16/11.2-24 | ||
| Steering | Hydraulic Steering | ||
| Brake | Toe Type | ||
| Park Brake | Latch Pedal | ||
| WORKING SYSTEM | |||
| Hitch | Partial Separated Type, 3-Point hydraulic hitch,Category 1 | ||
| Max. Lift Force(N) | ≥6300 | ||
| Rear PTO | Rear Rectangle Spline, 6 Teeth, 540/720rpm | ||
|
US $3,500-8,000 / Piece | |
1 Piece (Min. Order) |
###
| After-sales Service: | Warranty |
|---|---|
| Warranty: | 1 Year |
| Type: | Wheel Tractor |
| Usage: | Farm Tractor |
| Certification: | ISO, CE, EPA, CCC, ISO/TS16949, EEC, XQC, Customer Requirement |
| Drive Wheel: | 4WD |
###
| Samples: |
US$ 2200/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| We have many models about the machine, if you are interested, we will send the catalogue and details for you, please send the enquiry.thanks. |
###
| MODEL | LS-Mini tractor 12hp | ||
| Engine | Model | 195 | |
| Type | 1cylinder,4-stroke,horizontal,water-cooled,diesel | ||
| Cooling Mode | Condenser (Radiator) | ||
| Power | 12hp | ||
| Combustion System | Direct Injection | ||
| Cylinder Bore | 92mm | ||
| Piston Stroke | 95mm | ||
| Compression Ratio | 18:01 | ||
| Rated Speed | 2400rpm | ||
| Fuel Efficiency: | ≤257gl/kw.hr | ||
| Displacement | 0.632 | ||
| Fuel Tank Capacity | 8L | ||
| Water Tank Capacity | 2L | ||
| Net Weight | 112kg | ||
| Gross Weight | 122 | ||
| Overall dimensions:(L×W×H) | 2140×905×1175mm Without tiller | ||
| Overall dimensions:(L×W×H) | 2600×1000×1175mm With tiller | ||
| Front wheel size | 5.00-12 | ||
| Back wheel size | 7.50-16 | ||
| Ground clearance | 180mm | ||
| Working weight | 490kg | ||
| Transmission style | Belt transmission | ||
| Steering style | Steering wheel power steering system | ||
| Brakes | Two side wheel brake | ||
| Starter | Electric start/Hand crank | ||
| Seat | Adjustable | ||
| Gear style | (3+1)*2; 6 Forward, 2 Reverse | ||
| Speed | Forward | 1.68, 2.61, 4.22, 6.79, 10.57, 17.08 | |
| Reverse | 1.29, 5.22 | ||
| Rotary tiller | Transmission Type | Middle Gears Transmission, or side gears transmission | |
| Width | 1000mm Adjustable | ||
| Number of blades | 18-20pcs | ||
| Working depth | 150-250mm | ||
| Up and down control | Hydraulic system | ||
###
| Model | LS-Small tractor 25hp | ||
| Wheel drive | 4×2 | ||
| Dimensions | 2700×1400×1400 | ||
| Weight(kg) | 950-1010 | ||
| Front wheel(mm) | 900,1000,1100,1200 adjustable | ||
| Rear wheel(mm) | 960,1000,1100,1200,1300 adjustable | ||
| Wheel base(mm) | 1400 | ||
| Min. ground distance(mm) | 350 | ||
| Gear shift | 6+1 | ||
| Tyre size | 9.5-20/500-14 | ||
| ENGINE Type | |||
| Rated power(kW) | 18.32kw | ||
| Rated speed (r/min) | Water cooled,vertical,4 stoke and direct injection | ||
| Start | Electric | ||
| Transmission | 2200 | ||
| Clutch | single ,dry friction, single clutch | ||
| Connection/PTO | 3×2+1 | ||
| 3 point suspension/ Rear P.T.O 540 | |||
###
| MODEL | LS- Middle tractor 50hp | ||
| Horsepower&Drive Type | 50hp, 4×4 | ||
| ENGINE | |||
| Engine Model | 50HP | ||
| Type | Vertical, Water-Cooled, Four Strokes, Direct in Injection | ||
| Rated Output(kW) | 36.8 | ||
| TRACTOR PARAMETER | |||
| Dimension L*W*H (mm) | 3558*1500*2245 | ||
| Wheel Base (mm) | 1900 | ||
| Wheel Tread F/R(mm) | 1060/1100 | ||
| Min Ground Clearance(mm) | 300 | ||
| TRANSMISSION | |||
| Gear Shift | 8F+2R | ||
| Clutch Type | Dry Single-stage | ||
| RUNNING SYSTEM | |||
| Tire F/R | 650-16/11.2-24 | ||
| Steering | Hydraulic Steering | ||
| Brake | Toe Type | ||
| Park Brake | Latch Pedal | ||
| WORKING SYSTEM | |||
| Hitch | Partial Separated Type, 3-Point hydraulic hitch,Category 1 | ||
| Max. Lift Force(N) | ≥6300 | ||
| Rear PTO | Rear Rectangle Spline, 6 Teeth, 540/720rpm | ||
PTO Shaft Safety Chains
PTO shaft is the part of a tractor that helps transfer power from the tractor to the equipment it is hooked to. A PTO shaft is important if you have a tiller or bush hog. The correct PTO shaft size is crucial for both the tractor and the equipment. If the PTO shaft size is not correct for your equipment, it may not work.
>
Safety chains
<br/Safety chains are an essential part of securing your PTO shaft. They prevent a rotating plastic shield from coming loose and causing injury or damage. It is important to protect your PTO and any other drive shafts on your machine. Watch the video below for more information about the dangers of unguarded PTOs.
PTOs are an efficient way to transfer mechanical power between tractors and implements. They helped revolutionize North American agriculture during the 1930s. Despite their convenience, PTOs have also proven to be one of the most common farm machinery hazards. This fact sheet outlines several important PTO safety precautions.
Safety chains for PTO shafts are necessary to protect both tractor and implement from damage. The PTO shaft must be attached properly to the tractor and the implement before starting the equipment. Before operating, be sure that the safety chains are positioned in a way that allows them to fully move. When operating the PTO, avoid being too aggressive as this can damage the drive line and shaft. For further safety, make sure to fit a torque limiter or clutch on the implement end of the PTO shaft.
PTOs are great for plowing, mowing, and shredding, but they also have potential to cause injuries if you don’t use a safety chain. It’s best to get a chain that is long enough to prevent injuries. Also, be sure that the PTO shaft does not compress completely at any point during the operating range. There should be several inches of overlap in the longest operating extension of the PTO.
Another common hazard with PTOs is IID shafts. While many machines and tractors have driveline guards, these are often missing. If you have a PTO with an IID, you should consider installing a safety chain.
Shield
A swingable tractor PTO shaft shield assembly consists of an inverted U-shaped shield member slidably attached to a bracket. It extends above the PTO shaft and has several notches and pins that engage each other. It can be held in a number of positions and can be retracted when not in use. It also includes a cover member that covers the space between the shield and tractor and abuts the raised portion of the shield member.
The PTO shaft shield is typically made of plastic, but it can also be made of metal. Plastic is less likely to break or damage than metal. The shield is supported by a bracket 51 with a curved distal end 57 and a non-metallic guard 59. When used in conjunction with a bracket, a PTO shaft shield should be properly installed to prevent damage to the shaft.
Keeping the PTO shaft shield in good condition is crucial to the safety of your tractor and your workers. An improperly installed PTO shaft shield can result in severe injuries. It may also ensnare or strike people in the vicinity. Proper maintenance will prevent many of these injuries. Equipment manufacturers have made great strides in reducing the risks of PTO mishaps. Operators are also responsible for keeping the shields in good condition. Removing the guards will only increase the risk to the operator.
A PTO shaft shield is a tubular assembly that is mounted on the tractor PTO shaft. It consists of two telescopic pieces that are held in place by shield support bearings. This shield protects the PTO shaft and the universal joints from debris and prevents premature wear. The shield can be easily removed and replaced if necessary.
IID shaft guard
The IID shaft guard is a safety device used to protect PTO powered machinery from the possibility of separating while in use. The shaft, which is a telescoping shaft, is attached to the PTO stub on tractors. The telescopic feature is convenient when moving across uneven ground. However, this type of shaft can cause serious injury if it separates while in use.
The IID shaft guard can prevent these injuries by completely covering the shaft. The guard is made of metal or plastic and rotates along with the shaft. A person can react in less than five tenths of a second, making the IID shaft guard an important part of PTO safety.
PTO shafts rotate at speeds as high as 540 rpm, which is very fast. A limb could be wrapped around the driveline shaft, causing a serious injury or death. Because of the speed of a PTO, it can be difficult for an individual to discern whether it is engaged or not and may not be aware of the danger.
An IID shaft guard should be fitted to every tractor PTO shaft. It should be tested and rotated regularly. It is also important to keep the tractor engine off when working around the PTO shaft. Using a drawbar to protect driveline components is also important. It will prevent stress on the driveline and reduce the possibility of separation.
Overrunning clutch
An overrunning clutch on a PTO shaft is a mechanism that allows the PTO shaft to rotate freely in one direction while restricting the speed of the implement being hauled behind the tractor. This clutch is also useful for preventing the speed of the implement from exceeding the speed of the tractor while slowing down. It comes in two basic configurations, one for a clockwise and the other for a counter-clockwise direction.
Another type of overrun clutch is used on tractors with a PTO driven bush hog. A bush hog has a flywheel and blades that drive the transmission through the PTO shaft. Without an overrunning clutch, these implements would freewheel while the tractor is driving and would potentially break the shaft.
A PTO overrunning clutch prevents power from backfeeding into the transmission, the part that transmits power to the rear wheels. Without an overrunning clutch, the tractor could backfeed power, causing an accident if the blade assembly hits an object. As such, it is essential to use the overrunning clutch to ensure that your tractor will be safe.
Direction of rotation
Despite its name, the direction of rotation of a PTO shaft can change if necessary. Most PTOs have a single-direction rotation, but you can often reverse the direction by installing a reverse PTO adapter. However, you should only use reverse PTOs when absolutely necessary.
A standard PTO rotation direction has been defined by the International Organization for Standardization (ISO). It is considered necessary to adhere to this standard, as improper rotation can cause damage to implements attached to a PTO. This standard helps farmers avoid problems such as ruined implements. While the direction of rotation of a PTO shaft is not always the same for all PTOs, there are some tractors that allow it to rotate both ways, while others have no restrictions.
The direction of rotation of a PTO shaft can be changed by using a hydraulic pump. Another way to connect a PTO is through a “sandwich” type split shaft unit. These units are mounted between the transmission and engine, and they usually receive drive directly from the engine shaft. They can also deliver complete engine power to a PTO. However, you must modify your vehicle’s driveline to install such a split-shaft unit.
editor by czh 2023-01-30
China Hot Sale 65HP 4WD Mini Farming Tractor pto shaft carrier bearing
Merchandise Description
Very hot Sale 65HP 4wd Mini Farming Tractor
Description
YTO/YUCHAI engine
Equipment variety: F12+R12
Rated electrical power: forty seven.8kw
PTO velocity: 540/1000
Main units:
Gearbox: F12+R12
4Wheel push
Hydraulic energy steering
Differential lock
Dual velocity PTO
Dual stage clutch
Partial separated hydraulic hitch
Draft positional adjustable controll
Classification 2 rear-mounted a few-stage linkage
Optional devices:
Fan cab
Luxurious cab
Roll bar
Heater
Air-conditioning
Ballast
Paddy tire
Air-brake
Dual mutli-way valve
Swing drawbar
Qualities
one. It is versatile in steering
two. Low oscillation
3. Advanced chassis and good load-bearing capacity
four. Lager energy output
five. Fashionable, stylish and cozy cabin
6. It is simple to operate
7. Extensively used in farm, lawn, backyard garden and others
eight. Huge gasoline tank for longer perform time
Specs
| Model | CHHGC-654 |
| Travel sort | four*four |
| Engine | |
| Engine product | YT4B2 |
| Capability of fuel tank(L) | forty three |
| Rated velocity (r/min) | 2200 |
| Engine electrical power (kw) | forty eight |
| Rated gas intake (g/kw@h) | ≤242 |
| Transmission | |
| Clutch | One disc/dry type/dual phase |
| PTO Pace(rpm) | 540/1000 |
| Gearshift | F12+R12 shuttle gears |
| Hydraulic program | |
| Hydraulic output valve | one particular team |
| Three stage linkage | |
| Category of 3-stage url | categoryII |
| Lifting potential(at stage of 610mm)KN | eleven |
| Technical parameter | |
| Dimension( L*W*H) mm | 3980*1635*2150 |
| Wheel base(mm) | 2040 |
| Track base(mm) entrance / rear wheel | 1400/1300 |
| The smallest clearance(mm) | 325 |
| Front / rear tyre | 8.3-20/twelve.4-28 |
Characteristics
1. Steamline include offers great look.
two.8+2 sliding equipment modify, all gears are aranged in buy, great adaptability in all agricultural conditions
3. Daft/situation management hydraulic regulatingsystem Catergory 1 hitch Double speed PTO
4. Closed paddy rice entrance travel axle, substantial procedure efficiency and suitbale for paddy operation.
five. Optional air brake, it can complete all farm work and transportation perform.
six. Bolstered PTO shaft, hello-trustworthiness.
7. Can install famous domestic engines, like ZheJiang Yuchai, YTO Makes potent and trustworthy
Our Merchandise
Workshop
| Type: | Wheel Tractor |
|---|---|
| Usage: | Farm Tractor |
| Certification: | ISO, CCC, ISO/TS16949 |
| Drive Wheel: | 4WD |
| Emission Standard: | Euro III |
| Fuel: | Gas / Diesel |
###
| Customization: |
Available
|
|---|
###
| Model | CHHGC-654 |
| Drive type | 4*4 |
| Engine | |
| Engine model | YT4B2 |
| Capacity of fuel tank(L) | 43 |
| Rated speed (r/min) | 2200 |
| Engine power (kw) | 48 |
| Rated fuel consumption (g/kw@h) | ≤242 |
| Transmission | |
| Clutch | Single disc/dry type/dual stage |
| PTO Speed(rpm) | 540/1000 |
| Gearshift | F12+R12 shuttle gears |
| Hydraulic system | |
| Hydraulic output valve | one group |
| Three point linkage | |
| Category of 3-point link | categoryII |
| Lifting capacity(at point of 610mm)KN | 11 |
| Technical parameter | |
| Dimension( L*W*H) mm | 3980*1635*2150 |
| Wheel base(mm) | 2040 |
| Track base(mm) front / rear wheel | 1400/1300 |
| The smallest clearance(mm) | 325 |
| Front / rear tyre | 8.3-20/12.4-28 |
| Type: | Wheel Tractor |
|---|---|
| Usage: | Farm Tractor |
| Certification: | ISO, CCC, ISO/TS16949 |
| Drive Wheel: | 4WD |
| Emission Standard: | Euro III |
| Fuel: | Gas / Diesel |
###
| Customization: |
Available
|
|---|
###
| Model | CHHGC-654 |
| Drive type | 4*4 |
| Engine | |
| Engine model | YT4B2 |
| Capacity of fuel tank(L) | 43 |
| Rated speed (r/min) | 2200 |
| Engine power (kw) | 48 |
| Rated fuel consumption (g/kw@h) | ≤242 |
| Transmission | |
| Clutch | Single disc/dry type/dual stage |
| PTO Speed(rpm) | 540/1000 |
| Gearshift | F12+R12 shuttle gears |
| Hydraulic system | |
| Hydraulic output valve | one group |
| Three point linkage | |
| Category of 3-point link | categoryII |
| Lifting capacity(at point of 610mm)KN | 11 |
| Technical parameter | |
| Dimension( L*W*H) mm | 3980*1635*2150 |
| Wheel base(mm) | 2040 |
| Track base(mm) front / rear wheel | 1400/1300 |
| The smallest clearance(mm) | 325 |
| Front / rear tyre | 8.3-20/12.4-28 |
What Is a PTO Shaft?
There are a few different types of PTO shafts. For example, there are German, Italian, and North American types. Moreover, there are several series options, such as cap-to-cap overall length, bearing diameter, and snap rings. Each type comes with different features and benefits, so it is important to select the correct one for your needs.
Power Take-Off
The Power Take-Off (PTO) shaft is a mechanical coupling system that couples an aircraft’s accessory gear box with an engine. It transmits high rpm and peak torque. It is an indigenously developed product, which has been cleared for flight fitment and successfully completed an engine ground run test. It is now being used by two Indian manufacturers.
There are four main types of PTOs. Semi-permanently mounted power take-offs are common on marine engines and industrial engines. These power take-offs are used to power secondary implements and accessories. In airplanes, accessory drives are also common. Jet aircraft use four different types of PTO units:
PTO shafts are composed of two telescoping pieces that slide into one another. This allows the user to lower and lift the implement. They are also equipped with universal joints, also known as U-joints. These joints allow flexibility and durability. These joints are held together by two yokes at each end of the shaft.
The speed of the power take-off shaft varies according to tractor size. Larger tractors turn the shaft at 1,000 revolutions per minute, while smaller tractors turn it at 540 revolutions per minute. This means that a person trapped in the open PTO shaft could be whipped around nine times in one second, while a person caught in a smaller tractor could be whipped around 16 2/3 times in one minute. Ultimately, the weight of the person could even cause the engine to stall.
Applications
PTO shafts have a variety of uses in the farm equipment industry. They can be connected to a wide variety of work equipment. For instance, a PTO is commonly used to power a hydraulic pump on a tractor’s front end. In such a case, a small shaft with a U-jointed design will attach to a yoke coupler and turn the pump. While this is not as universal as a tractor PTO, it still falls under the category of a PTO.
A PTO system will have a female coupling on one end and a male coupling on the other end. This essentially acts as an extension adaptor. It will transmit torque signals from the shaft to a static cover assembly to determine the speed and torque in both directions. In some cases, a PTO system will be able to record the data directly onto a PC or other electronic device.
In addition to power take-off systems, these systems can also provide power for auxiliary equipment. In addition, a split shaft PTO allows the power of one engine to power the axle of another vehicle. Depending on the engine’s power, a PTO may use either an air or hydraulic pump to power auxiliary equipment.
The PTO shaft is also useful for securing a tractor or equipment. This device features safety shields on both ends and fits securely inside the secondary shaft. The PTO shaft can be found in a variety of shapes. There are domestic-shaped and metric-shaped versions.
Safety precautions
Operator awareness is key in preventing PTO shaft entanglement. It is important to avoid performing any repairs while the machine is operating. It is also important to avoid wearing loose or frayed clothing that could become entangled in the rotating shaft. It is also essential to read and follow the tractor’s operating manual. Also, ensure that the PTO shaft is only used for its intended purpose.
A power take-off, or PTO, is a type of attachment that transmits mechanical power from a tractor to another piece of farm machinery. Common examples include hay balers, rotary cutters, weed mowers, and forage blowers. These attachments are often equipped with protective shields to prevent entanglement. The shaft should always be covered when in use.
Operators should also avoid getting too close to the PTO shaft. The operator may become entangled if they accidentally approach the spinning shaft. They should also avoid wearing loose clothing because loose clothing can easily get caught in the stub and cause serious injury. These safety precautions are essential for safe operation of all farm machinery.
When using a PTO with heavy drive, it is important to use a heavy-duty model with a PTO shaft that is appropriate for the application. Alternatively, use a universal joint or wide-angle universal joint. These attachments can be a safer alternative to traditional PTOs. Draw-bar pins on trailed machines should be firmly secured to avoid damaging the PTO shaft. It is also recommended to guard all drive shafts on the machine.
Design
A PTO shaft has several advantages. It is a versatile power transmission that is ideal for heavy-duty equipment. Its design is rigid, yet flexible, allowing for high-speed operation. This is due in part to the splines, which prevent the parts from separating during operation.
The gears of a PTO drive are made from high-quality steel, which increases their durability. They are made from SCM 440 gear material. This material has a high tensile strength and a high yield point. It also has a high Young’s modulus of 206,000 N/mm2. Its Poisson’s ratio is 0.3, while its pressure angle is twenty degrees. In addition, its addendum and dedendum coefficients are both greater than 1.0.
Designed for use on industrial and marine engines, PTOs allow the driver to transfer power from a primary mover to a PTO-powered attachment. They are easy to install and offer improved service life and decreased downtime. In aircraft applications, PTOs are also common. Jet aircraft and agricultural equipment often use PTOs.
The PTO shaft’s dimensions are crucial for preventing vibration. It should extend at least 14 inches from the hitch point to the input shaft of the implement. In some cases, a shorter shaft may not fit the tractor, so it is important to choose the right size. If the PTO shaft is too short, it could cause the two parts to separate when the tractor is turning a corner.
Cost
A PTO shaft is a very important part of a tractor because it transfers power to an attached attachment. These attachments typically include rotary tillers, brush cutters, hush hug, and mowers. While many attachments use a PTO shaft, the connection flange is not standardized. Some older models of tractors may have a connection flange that is closer to the tractor.
A PTO shaft will work with either a standard or a Weasler yoke. You can also choose from metric and North American models. There are also Italian PTO shafts. To ensure the best performance and durability, it is essential to ensure that the shaft is free of damage. To avoid such damage, a PTO shaft should be purchased from a reputable supplier.
PTO shafts are made from high-quality steel and feature a 1-3/8″ 6-spline at both the tractor and the implement end. In addition, splined PTO shafts are easy to replace and provide excellent horsepower. These PTO shafts can also increase a tractor’s work efficiency.
The cost of a PTO shaft replacement can vary. The average price range for a front-wheel-drive half-shaft is $470 to $940, and the cost for a rear-wheel-drive drive half-shaft replacement is about $1,600 to $2,000. The parts cost about two hundred dollars and the labor could take an hour or more.
Buying guide
If you’re looking to replace a PTO shaft on a lawn tractor, it’s important to consider several factors. First, the PTO shaft needs to be compatible with the tractor you plan to use it on. Then, you need to determine which size universal joint you need. To do this, you can use a PTO shaft size chart.
The PTO shaft is the component that transfers power from the tractor to the attached implement. It’s made up of several parts, including the internal and external PTO yoke, the universal joint, and the safety chain and shield. There are several types of PTO shafts available. You’ll want to choose the right size for your machine, as well as the number of PTO shafts you need.
A PTO shaft is essential for a tractor because without it, the tractor cannot drive. Understanding the PTO parts will help you operate farm machinery more effectively. For instance, if you’re buying a new Power Take Off shaft, you’ll want to look for one that’s compatible with the model and year of the tractor.
You’ll also need to consider the length of the PTO shaft. A PTO shaft can vary from 53 inches when compressed to 77 inches when fully extended. The most common length for a PTO shaft is about fifty-three inches, but you can also choose a longer one if you need more flexibility.
editor by czh 2022-12-28
China 150HP 4W Farming 4 Wheel Farm Equipment Tractor with Pto and Farm Tools tractor pto shaft types
Item Description
150hp 4w farming 4 wheel farm equipment tractor with PTO and farm instruments
This series tractor is four wheel drive model and with sensible framework. Our company investigation and produce the new kind special gearbox and rear axle, with the synchronizer shifts + shuttle shifts, bolder half shaft, much better gears and bolstered brake assembly.
Revenue Territory: Regions like Europe, South The usa and Australia, Africa and other locations
Matched Devices and Resources: Ploughing resources like disc plough, disc harrow, rotary tiller and cultivator. Optional resources like front loader, backhoe, trailer, mower, rake, spraying equipment.
LIFTOR Tractor Attributes:
one. For the entrance axle, the tractor use special large power electric powered hydraulic differential lock.
two. The hydraulic steering, make the operation considerably far more adaptable, and much far more appropriate for any diverse operating atmosphere Weichai-Deutz engine, and the unique sixteen inch double clutch, make the tractor a lot much more potent
3. The electric hydraulic clutch, impartial driving and braking method, make the operation considerably practical and labor-conserving Double pace electricity output(PTO), multi-way hydraulic output, and unrestricted adjustable rear wheel tread, go well with for a variety of agricultural farm implements demands.
4. The tractor can be outfitted with new unique luxury air-conditioned cabin, which is protected, comfy and hassle-free on maintenance.
Tractor Parameter:
|
TG sequence tractor(180hp-220hp) |
|||
|
Solution design |
HX1804(180hp) |
HX2104(210hp) |
HX2204(220hp) |
|
Wheel travel |
4×4 |
||
|
Dimension(L*W*H) |
5400×2460×3140mm |
||
|
Excess weight |
8000kg |
||
|
Entrance wheel tread |
1990mm |
||
|
Rear wheel tread |
1840(1820-1910)mm |
||
|
Wheel foundation |
2890mm |
||
|
Min land clearence |
430mm |
||
|
Equipment shifts |
16F+16R |
||
|
Tire dimensions |
sixteen.9-28/20.8-38 |
||
|
Steering gear |
Hydraulic steering |
||
|
Rear Suspension |
3 level suspension |
||
|
Motor SPECIFICATION |
|||
|
Engine model |
Weichai |
||
|
Motor sort |
Water cooled, vertical, 4 stroke and direct injection |
||
|
Rated electrical power(kw) |
132.3 |
154.four |
161.7 |
|
Rated revolution |
2300/2400 r/min |
||
|
commence way |
Electric start off |
||
|
Transmission |
4×4×(1+1) shifts |
||
|
Clutch |
Dry friction, double phase clutch, seperate procedure |
||
|
PTO pace |
6 splined 540/one thousand |
||
LIFTOR Tractor Pictures:
Optional Implements for Tractor :
About US:
“Liftor Enterprises” is a higher-tech business skillfully specialised in R&D, manufacturing, sales, services of electrical storage,intelligent industrial technique, agriculatural tractor, lifting machine and wheel loader. It is located in HangZhou, ZheJiang Province with sophisticated forklift producer engineering, processing equipment and perfect item testing centre.
Our organization is the China Automobile Market Affiliation member unit. We won the honorary title this kind of as “Exceptional Organization of Quality Administration, Believability and Provider AAA level”, “Countrywide Company of Excellent Creditworthiness”, “National Quality Administration Innovative Enterprise” and so on. The organization has already passed the protection manufacturing standardization and the good quality authentication of ISO9001:2008 and European Union CE certification, fit-out national patent certificate.
Our major gear are agriculatural tractor, lifting device, wheel loader and forklift. It is widely employed in numerous spots of present day logistics.
FAQ:
one. Manufacturer or Buying and selling Business?
We are foremost tractor maker for 20 many years, and specialize in 12-240Hp tractors in China.
two. MOQ: Mini tractor: 8 units Middle tractor(twenty five-40hp): 2 units Above 50hp: 1 unit
3. Spare Areas: Free toolbox and effortless destroyed areas.
4. Shippment: We can help you prepare shippment.
five. Shipping Time: Usually 25 days. In CZPT season,thirty-40 times
6. Guarantee Time: Comprehensive service program, 12 months considering that arrival of spot port
7. Payment Terms: We accept thirty%T/T in advance, and 70% T/T before supply
8. Tractor Alternatives: Can be geared up with ROPS, Cover, Cabin, AC Cabin, Air Brakes, Hydraulic Valve Out, Paddy Tire or as for every your demands.
nine. Tractor Brand: We have our personal symbol. And we also can place your emblem for free of charge.
10. Deal and Loading: (1).full tractor bundle: 2 units/20GP, 4 models/40HQ(2).Iron Frame Deal: 8 models/20GP, 16 models/40HQ
11. Tractor Implements: Rotary tiller, disc plow, furrow plow, cultivator, front end Loader, backhoe, Mower, Trailer, Snow Blower or as for every your requirements.
12. Component source: Full Parts Workshop, and can provide all parts
| After-sales Service: | Online Support |
|---|---|
| Type: | Rotary Tiller |
| Application Field: | Agriculture, Livestock, Aquaculture, Forestry |
| Farming Policy: | Dry Cultivating Machinery |
| Power Source: | Gasoline |
| Operation: | Soil Preparation Machinery, Movable Operation |
###
| Customization: |
Available
|
|---|
###
|
TG series tractor(180hp-220hp)
|
|||
|
Product model
|
HX1804(180hp)
|
HX2104(210hp)
|
HX2204(220hp)
|
|
Wheel drive
|
4×4
|
||
|
Dimension(L*W*H)
|
5400×2460×3140mm
|
||
|
Weight
|
8000kg
|
||
|
Front wheel tread
|
1990mm
|
||
|
Rear wheel tread
|
1840(1820-1910)mm
|
||
|
Wheel base
|
2890mm
|
||
|
Min land clearence
|
430mm
|
||
|
Gear shifts
|
16F+16R
|
||
|
Tire size
|
16.9-28/20.8-38
|
||
|
Steering gear
|
Hydraulic steering
|
||
|
Rear Suspension
|
Three point suspension
|
||
|
ENGINE SPECIFICATION
|
|||
|
Engine model
|
Weichai
|
||
|
Engine type
|
Water cooled, vertical, 4 stroke and direct injection
|
||
|
Rated power(kw)
|
132.3
|
154.4
|
161.7
|
|
Rated revolution
|
2300/2400 r/min
|
||
|
start way
|
Electric start
|
||
|
Transmission
|
4×4×(1+1) shifts
|
||
|
Clutch
|
Dry friction, double stage clutch, seperate operation
|
||
|
PTO speed
|
6 splined 540/1000
|
||
| After-sales Service: | Online Support |
|---|---|
| Type: | Rotary Tiller |
| Application Field: | Agriculture, Livestock, Aquaculture, Forestry |
| Farming Policy: | Dry Cultivating Machinery |
| Power Source: | Gasoline |
| Operation: | Soil Preparation Machinery, Movable Operation |
###
| Customization: |
Available
|
|---|
###
|
TG series tractor(180hp-220hp)
|
|||
|
Product model
|
HX1804(180hp)
|
HX2104(210hp)
|
HX2204(220hp)
|
|
Wheel drive
|
4×4
|
||
|
Dimension(L*W*H)
|
5400×2460×3140mm
|
||
|
Weight
|
8000kg
|
||
|
Front wheel tread
|
1990mm
|
||
|
Rear wheel tread
|
1840(1820-1910)mm
|
||
|
Wheel base
|
2890mm
|
||
|
Min land clearence
|
430mm
|
||
|
Gear shifts
|
16F+16R
|
||
|
Tire size
|
16.9-28/20.8-38
|
||
|
Steering gear
|
Hydraulic steering
|
||
|
Rear Suspension
|
Three point suspension
|
||
|
ENGINE SPECIFICATION
|
|||
|
Engine model
|
Weichai
|
||
|
Engine type
|
Water cooled, vertical, 4 stroke and direct injection
|
||
|
Rated power(kw)
|
132.3
|
154.4
|
161.7
|
|
Rated revolution
|
2300/2400 r/min
|
||
|
start way
|
Electric start
|
||
|
Transmission
|
4×4×(1+1) shifts
|
||
|
Clutch
|
Dry friction, double stage clutch, seperate operation
|
||
|
PTO speed
|
6 splined 540/1000
|
||
Safety Precautions For a PTO Shaft
When you are working around PTOs, be sure to observe several safety precautions. These include removing the shield, keeping a safe distance from the machine, and avoiding entanglement. Entanglement is a serious injury that can even lead to death. Workers who are near the machine should always maintain a safe distance, especially if the speed of the machine is fast enough to entangle clothing. The speed of the PTO is usually 540 to 1,000 revolutions per minute, and the speed is enough to cause injury in a split second.
Safety precautions
One of the most important safety precautions for a PTO shaft is to make sure that it is properly guarded at all times. An unguarded PTO shaft can entanglement a worker, cause an injury, or even cause death. Operator awareness is key in preventing this hazard. Among other things, workers should not make repairs while the PTO is in use or wear loose or frayed clothing when working near the PTO. Likewise, they should read and follow instructions provided with their tractor and implement. Finally, they should use PTO shafts only for their intended purpose.
Another important safety precaution is to wear a protective gear such as a helmet and gloves before operating a PTO shaft. This type of equipment can be extremely dangerous because of its speed. A PTO shaft that is rotating at 540 rpm can travel two metres in less than a second. Damaged shielding is a common cause of entanglement, so it is important to check your machinery for damage before operating it.
When operating a tractor, PTOs should be kept clear of loose clothing. Loose clothing can easily catch on a rotating PTO shaft. Long hair or jewelry can also become entangled in a PTO shaft. It is also important to remember to secure the PTO shaft guard when the tractor is not in use. Also, never engage a PTO when the engine is off.
Types of pto shafts
PTO shafts are used in tractors and other equipment to secure the secondary gear in the tractor. They are available in different styles and sizes. These shafts are designed to withstand pressure, impacts, and tension. They may also include a shear pin and slip clutch. Before buying a new PTO shaft, make sure to check its measurements.
There are two types of PTO shafts available in an Agric rototiller. The first one has a slip clutch and the other has a shear pin safety device. In order to identify the type of PTO shaft used in a particular tractor, it is important to understand what it is used for.
There are two types of PTO shafts: the external and internal. The latter is used for larger machines, such as a lawnmower. The former is suitable for agricultural applications and is the preferred type for large tractors. The former is suitable for plowing, mowing, and shredding.
Transmission PTO shafts are the oldest type of PTO. They are connected to the tractor’s transmission. When a tractor is in gear, it stops the PTO shaft. However, when it’s not, it’s ineffective and can pose serious problems, such as when mowing. This type of PTO can also cause an overrun clutch to prevent the PTO shaft from working properly.
Reaction time
It’s important to know your reaction time when working around a power take-off (PTO) shaft. This part of the machine rotates at approximately 540 revolutions per minute and can pull in seven feet per second. Reaction time can be affected by age, physical condition, medications, lack of sleep, and stress. If you’re working around a PTO, be sure to remove any loose jewelry or other items that might interfere with your reaction time.
PTO accidents can be caused by several factors. The operator, the machine, and the environment all play a role. The operator’s physical and mental condition can also contribute to unsafe actions. For example, young operators may lack the knowledge and experience to recognize hazards. Older workers may also have slower reaction times, which can make it difficult to react quickly to slippery work areas.
Reaction time is measured as the time between a stimulus and the response. It does not include the time required to move the hand. Reaction time is a critical factor in sports, where athletes need to be quick to respond to the moves of their opponents. A good reaction time is necessary to score points.
A demonstration of the speed of a PTO shaft is a great tool to demonstrate how dangerous this part of a machine can be. To demonstrate the speed, use a 7-foot sash cord tied to a sliding collar universal joint. Select a 540-rpm PTO shaft, and a three-inch diameter shield. In one second, the rotating shaft makes nine revolutions and travels 7.1 feet. However, a cordless drill does not rotate at full speed and will take at least two seconds to wrap around the string.
Standardization
The standardization of PTO shafts in tractors is a major project. The EU Machinery Directive requires the protection of operators from rotating parts, such as the PTO. This is especially important when parts are accessible, as clothing can easily be wrapped around them, resulting in an accident. To prevent such accidents, manufacturers have begun to install non-rotating guards over the PTO drive shaft. These guards comply with the current EU good practice.
The European Standard EN 12965:2003+A2:2009 specifies the safety requirements for PTO drive shafts and their guards. It also specifies safe working practices for these components. The standard was approved by CEN on 16 September 2019. It is important to follow these regulations to ensure safe operation.
In the 1980s, a movement began among agricultural engineers to standardize the PTO shaft. The movement began because the different types of PTO shafts had not been interchangeable. A common example is the Deutz-Fendt shaft, which had become a standard for tractors.
As the power for PTO drives comes from the gearbox, the counter shaft acts as the PTO outlet. Standardization of PTO speeds makes it easier for manufacturers to design equipment to meet a specified speed. For example, a thresher is expected to run at a specific peripheral velocity of the threshing cylinder, which is a function of standard PTO speeds. This also allows designers to plan pulley arrangements with the standard PTO speed in mind.
Safety chains
The PTO shaft is an integral part of a tractor or implement, so it’s essential to secure it with safety chains. These chains are welded to both ends of the shaft and serve as backup connections between the tractor and trailer coupling point. There are several types of chains available, from domestic to metric, to meet your specific needs.
Because of the high speeds of PTO shafts, it’s crucial to protect these parts from being tangled. A single fall of a PTO shaft can cause serious injury or even death. In such an unfortunate situation, safety chains can prevent such injuries. PTO shafts are also extremely dangerous because the components can become hot while they are operating.
In addition to safety chains, operators must also be aware of the hazards that can occur when working near a PTO shaft. Unsafe behaviors, such as performing repairs while operating a machine, or wearing frayed clothing can lead to serious injury or death. In addition, all users should follow the instructions on the tractor or implement they’re using. It’s also essential to use a PTO shaft for its intended purpose.
In addition to safety chains, farmers should also ensure that the PTO drive shaft is securely attached to the tractor or implement. A broken or damaged PTO guard can be just as dangerous as an unprotected shaft. In addition, a poorly fitting PTO guard may provide a false sense of security. For this reason, it’s important to use protective clothing when operating a tractor or implement powered by a PTO.
Shield
The CZPT-Co universal fit PTO shaft shield is a simple and easy to use shield that has a patented lever release. The shield comes in two sizes, the smaller diameter shield is for shafts with a diameter of 1 5/16″ to 2 1/8″ and the larger diameter shield fits shafts of 2″ to 3 1/8″. Each shield is pre-installed with an assortment of bearings. The shield’s length is measured from the end of the yoke bearing groove to the other end.
If you’ve ever tried to work on a PTO shaft, you know that it can be frustrating. A PTO shaft shield is a safety device that covers the shaft and prevents it from rotating. These shields are also designed to be easy to connect and remove. The CZPT safety clip makes it easy to connect or disconnect the shield, and locks into place to prevent it from rotating with the inner driveshaft. The CZPT material used in RPM Transmissions driveline safety shields is strong and rigid.
Another improvement of this PTO shaft shield is the bracket that supports the two-piece PTO shaft and outer shield. The bracket is shown in FIG. 2 as an angled front view. FIG. 7 is a side elevation view of the bracket mounted to the machine tongue.
editor by czh 2022-12-24
Best near me shop made in China – replacement parts – PTO shaft manufacturer & factory Manufacture weasler pto shafts Supplier Tractor Tyre Farming Tyre with ce certificate top quality low price
We – EPG Group the greatest agricultural gearbox and pto factory in China with 5 various branches. For much more details: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
k5 blazer 6 inch carry generate shaft It pto adapter one thousand to 540 is push shaft golfing our john deere f935 pto shaft bearing intention pto shaft for a bush hog to 4 wheel drive shaft supply pto shaft trapped in tractor a john deere 4840 pto shaft removal extensive muncie pto bolts range 2002 f150 push shaft of good quality products at reasonably priced rates, offer the greatest service for customers content and add to our ongoing advancement. EPG is prepared to cooperate sincerely and create commonly with close friends! We designed and created several tractor spare areas for Japanese Tractors&interval
The elements for example&colon Tyres&comma rim Jante&comma Package coupling KB-TX 3 point linkage&period of time Exhaust pipe Steering wheel&period Package coupling YM F14&solF15 ect&time period
Most of the spare elements are with stock&time period If you are fascinated in&comma you should really feel simple to speak to me&period
Positive aspects of our business—HangZhou Lefa
one&time period Specializing in manufacturing and promoting the farm equipment far more than eleven many years&interval
2&period of time “Lefa” generate in China and France&interval
3&period of time “CE
four&time period With the strict top quality control and greatest provider for buyers&interval
5&period of time We can offer outstanding and speedy following-revenue service&interval
6&period Our purpose&colon Earn-get&period of time
7&time period We can design and style and generate devices in accordance to customer’s demands&interval
8&interval We developed dozens of Japanese tractors components&comma we can produce the parts with device collectively&period of time
Welcome to send us your inquiry&time period We will ship you the depth listing with pictures&interval
Welcome to pay a visit to our factory&excl
| Japanese tractor spare parts in Stock | |
| tractor rim | gears |
| kit coupling | bearing |
| steering wheel | tractor website link hitch |
| PTO shaft | tractor sealing KB-TX |
| tractor blades | lamps |
| tractor hitch YM F14&solF15 | link hitch |
| tyre | sealing |
| gasket | light |
| air filter | tractor hub |
| filter element | brake shoes |
| air strainer element | calande |
| air filter cartridge | hitch |
| cardan | tractor ignition key |
| tractor water pipe | klaxon |
| disc clutch KB-TX | mass tractor |
| counter | battery cap |
| clutch | ratchet wheel |
| tractor bulb | oil pressor |
| tractor light | radiator cap |
| exhaust collector | tractor regulator |
| Tractor keys | stickers |
| gasket | light |
| tractor blades | lamps |
100HP near me made in China – replacement parts – pto shaft for 8n ford tractor 4WD Farm Farming Wheel Construction Compact Tractor with ce certificate top quality low price
We – EPG Group the largest agricultural gearbox and pto manufacturing facility in China with 5 different branches. For a lot more information: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
8n ford tractor pto shaft removing Our touareg travel shaft substitute company pto stub shaft has dorman 80992 reliable 2004 dodge dakota front drive shaft economic pto shaft go over chains power, pto shaft movie builds lock pin for pto shaft up pto common joint sizes a pto shaft areas around me technician staff contingent with higher top quality, possesses the manufacturing assembly line of technicalization in China and perfect program examining on product top quality and runs marketing and advertising networks all through the country. EPG Equipment is positioned in XiHu Region HangZhou Zhejiang ,China. It is 30km from our manufacturing facility to HangZhou global airport.
100HP 4 wheel drive Farm/Farming/Wheel/Construction/Compact Tractor
1.YTO/ EPT Engine
2.Drive Wheel:4 wheel drive(4*4)
3.4-stroke engines with substantial torque reserve.
four.Adju EPT entrance and rear tracks.
5.Total hydraulic steering.
Specialized Parameters
| Model No. | TL1004 | |
| Type | four*four | |
| Engine | Product | QC4115TA |
| Rated power(kw) | seventy three.five | |
| RPM | 2300 | |
| Overall dimension (L*W*H)(mm) | 4365*2048*3060 | |
| Tread(mm) | Front | 1610(Can be adjusted to 1950) |
| Rear | 1620(Can be altered to 2571) | |
| Wheelbase | 2195 | |
| Clutch Variety | Single blade,dry,butterfly spring pressed, independent operation, double function | |
| Gear Box | Two shaft, Straight teeth, differential lock | |
| Gear change | 16F+8R | |
| Weight (kg) | 3400 | |
| Tyre | Front | eight.3-24 |
| Rear | 14.9-30 | |
| PTO(RPM) | Rear seperated, 540/one thousand rpm | |
| PTO Shaft Spline (mm) | 8D-38×32×6 | |
Tractor Functions
1.Gas use get to upto 1 liter/hour diesel.
two. Differential lock stop rear whee EPT skidding when climbing, working in paddy land and rainy weather.
3.Equip with double speed of PTO shaft 540/760 rpm. Tailored to diverse discipline type.
four.Undertake complete hydraulic steering, independent gas tank, effortless running and large mobility.
5.Adju EPT front and rear tracks meet agricultural needs of diverse locations. Added-huge h2o tank and large capacity routine maintenance-cost-free battery make the machine with greatest warmth-dispersion and commencing functionality.
6.Can adopt to numerous implements,this sort of as plough,disc plough,ratory tiller,disc harrow,and so forth
Organization Profile
TANGLAND EPT Organization, is a wholly-owned subsidiary of TANGLAND Group, is the expert firm for Investing & EPT Exchange and cooperation. We set up branches in ZheJiang , ZheJiang and HangZhou, as properly as overseas assembling plant, or/and demonstrating space and service centre, in Pakistan, UAE, and some Asian & African nations. TANGLAND Team is a thorough firm including manufacturing, assembling, Casting & Foundry, producing Casting components, Electric Vehicle, Tractor, Gentle truck, Semi-trailer, Steel ball and Nylon 6 products, Managing an Industrial products’Information & Trade System, the headquarter is in Ji’nan, ZheJiang , and assembling, machining & foundry and castingplants are in HangZhou, HangZhou, HangZhou and HangZhou, theInformation and Trade platform named-TANGLANDINFORMATION & Technologies Organization.
Workshop
Deal
Pre-Revenue Service
1. Inquiry and consulting assist.
2. Sample testing assist.
three.Look at our Manufacturing facility.
After-Sales Support
one.Education how to put in the machine, training how to use,preserve and restore the machine.
2.Engineers available to service machinery overseas.
FAQ
Q1.What is your conditions of payment?
A:T/T forty% as deposit,and 60% before loading.we will demonstrate you the photos of the goods and offers ahead of you spend the equilibrium.
Q2.What your terms of shipping?
A:EXW,FOB,CFR,CIF.
Q3.How about your shipping time?
A:Usually,it will just take about 20 times soon after receipt of deposit payment.The certain shipping and delivery time depends on the things and the quantity of your buy.
This fall.Are you intrigued in dealership with local company?
A:Sure,we are quite interested in this business.we might like to cooperate with some neighborhood spouse to sell far more tractors in nearby industry and supply far better service.
Q5.Do you examination all your tractors ahead of shipping and delivery?
A:Sure,we have a hundred% tractor test and total top quality handle method before supply.
Q6.How do you make our enterprise lengthy-phrase and good romantic relationship?
A:1.We keep very good good quality,aggressive cost and effective support to ensure our customers advantage
2.We safeguard the reward of dealer or agent,in specifical period of time and region.
210HP manufacturer made in China – replacement parts – e36 driveshaft 4WD Big Horsepower Farming Wheel Machinery Tractors Tractor with ce certificate top quality low price
We – EPG Team the biggest agricultural gearbox and pto factory in China with 5 diverse branches. For much more information: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
pto spline extender The th400 driveshaft firm hsn code of pto shaft was rhino mower pto shaft certified pto shaft knuckle by pto shaft adaptor ISO9001:2008 a and l push shafts Good quality pto shaft roll pin Management 2006 chrysler pacifica push shaft Method. 2007 cadillac cts generate shaft Our factory has obtained the certificate of China’s Farm Machinery Merchandise Quality Authentication promulgated by the Farm Equipment Items High quality Authentication Centre of China.
210hp 4 wheel drive Massive Horsepower/Farming/Wheel/Equipment Tractors/Tractor
1.YTO/Weichai/Yuchai Engine
two.Travel Wheel:4 wheel drive(4*4)
3.4-stroke engines with higher torque reserve.
four.Adju EPT front and rear tracks.
five.Entire hydraulic steering.
Technical Parameters
| Tangland TL2104 Tractor | |||
| Item | Device | Requirements | |
| Whole Vehicle |
Manufacturer | / | Tangland |
| Product | / | TL2104 | |
| Travel | / | 4*four | |
| Function | / | Agricultural | |
| Overall dimension (L*W*H) | 5350×2320×3140 | ||
| Wheelbase | mm | 2898 | |
| Tread(Front/Rear) | mm | 1650,1760(1778,1862,1888,1972,1990,2100)/1650-2368,1750 | |
| Tread adjustment method | / | Rim flip / Rim flip + slide adjustable | |
| Min.GroundClearance(mm) | mm | 480 | |
| Fat | kg | 6600 | |
| Front / Rear Axle Mass | kg | 2610/3990 | |
| Maximum counterweight (Front / Rear) | kg | 500/600 | |
| Number of gears (forward / Backward / Craw) | / | 32F+24R(Optional16F+12R) | |
| Engine and clutch connection | / | Immediate | |
| Starting method | / | Electric start | |
| PTO(RPM) | rpm | 540/a thousand | |
| PTO Shaft Spline | mm | – | |
| PTO Shaft Output | kW | ≥130.nine | |
| Tyre(Front/Rear) | / | 16.9-28/20.8-38 | |
| Clutch Type | / | Single blade,dry,single function, dog-engagement, Air aid hydrostatic pedal driven | |
| Gear Box | / | Straight and helical teeth gear transmission, composed, Synchronizer and meshing gear shift, side operation. |
|
| Max. Traction | kN | ≥60 | |
| Cabin | Product | / | T15040045001 |
| Kind | / | Safety cab | |
| Engine | Manufacturer | / | Weichai Deutz engine |
| Sort | / | Inline, four-stroke, supercharged cold, high pressure common rail | |
| Design | / | WP6G210E330 | |
| Aspiration | / | Boost | |
| Cylinder | PCS | six | |
| Bore * stroke | mm | 105×130 | |
| Displacement | L | six.75 | |
| Compression ratio | / | 18:01 | |
| Calibration power | kW | 154 | |
| Calibration speed | r/min | 2200 | |
| Fuel injection pump type, model | / | BOSCH/WPCPN2 | |
| Nozzle type, model | / | BOSCH/WPCRIN2 | |
| Air filter type, model | / | 93 dust filter | |
| Starter model | / | M100R2004SE | |
| Cooling system type | / | Water Cooled | |
Tractor Functions
one.Gas usage achieve upto 1 liter/hour diesel.
2. Differential lock avoid rear whee EPT skidding when climbing, operating in paddy land and rainy temperature.
three.Equip with double speed of PTO shaft 540/760 rpm. Adapted to diverse subject type.
4.Undertake total hydraulic steering, unbiased fuel tank, easy running and large mobility.
5.Adju EPT front and rear tracks satisfy agricultural wants of different regions. Further-big h2o tank and high ability routine maintenance-totally free battery make the device with ideal warmth-dispersion and starting performance.
six.Can undertake to a variety of implements,this kind of as plough,disc plough,ratory tiller,disc harrow,etc
Our Major Products
Tractor
18HP-240HP, 2WD and 4wd, belt travel and shaft travel tractor
one. Suitable for street transportation, different farmland operations: style distinct manner EPT in accordance to distinct terrains such as paddy fields, dry land, mountains, orchards, hills, and so on.
two. Can be geared up with all types of mechanical gear and agricultural machinery: front loader, rear excavator, bulldozer, snowplow, and so forth. plow, hoe, rotary tiller, lawn mower, etc.
Farm Implements
Disc Plough, Disc Harrow,Mover/Slasher,Farm Trailer,Potato Planter,Potato Harvester,Land Leveller, Cultivator,Rotary Tiller/Rotocultivator,Share Plough,Soil Ridger,Seeder,Sprayer, Submit Gap Digger,Raker,Hay Rake,Seedbed Equipment,Corn Thresher,Ditcher, Rock Picker,Swather and and many others..
Packaging&Shipping and delivery
Support
Pre-sales services
1, 24 hrs on the web .Your inquiry will be fast reply by electronic mail .
two,Skillfully and patiently introduction,detai EPT photos and working video to demonstrate device .
3,Visting our manufacturing unit.
Support on sales
one,Take a look at every device and examine the equipment significantly .
2,Send out the machine picture which you purchase , then packing it with stHangZhourd export deal after you affirm the device is okay .
three,Shipping and delivery:If ship by sea .right after supply to seaport .Will notify you the transport time and arrival time . Finally, ship all unique paperwork to you by Categorical. We will explain to you the monitoring number after we put up the documents.
Right after-sales service
one, 24 hours online to resolve any issue . Supply you English guide book and complex assistance , maintain and set up video clip to aid you solve the dilemma, or dispatch employee to your manufacturing unit.
two Instruction how to install the equipment, education how to use, preserve and fix the device.
FAQ
1. What is the voltage/stage for this equipment ?
220V 50Hz/single period ,380V 50Hz/a few stage .We also could create in accordance to customer’s requirement.
two. What is your conditions of payment?
T/T 30% as deposit, and &70% just before shipping and delivery. We will demonstrate you the photos of the items and deals just before you spend the harmony.
three. What your phrases of shipping?
EXW,FOB,CFR,CIF,DAF.
4. How about your shipping and delivery time?
Typically, it will just take about thirteen times right after receipt of deposit payment. The distinct delivery time relies upon on the products and the amount of your purchase.
5. What’s your MOQ?
one established
six. How need to I do if meet up with some trouble although utilizing?
We can source English manual ebook and also consider a video for demonstrating how to solve the problems or dispatch our worker to your manufacturing facility.
Malawi China skf drive shaft in Kermanshah Iran Hot Sale Dq1204 120HP 4WD High Quality Cheap Agricultural Wheel Farming Tractor Made in China with ce certificate top quality low price
We – EPG Group the biggest agricultural gearbox and pto manufacturing facility in China with 5 diverse branches. For far more particulars: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
Malawi very hot sale DQ1204 120HP 4 wheel drive Higher good quality cheap Agricultural wheel Farming Tractor Produced in China
Tractor Major Characteristics and Positive aspects:
one.Outfitted popular model engine showing advanced ability,lower fuel consumption,high financial effectiveness.
2. Streamlined visual appeal style, beautiful and generous.
3.Transmission Scenario undertake meshed shift and insert the gearbox interlock system helps make the procedure much more smoothly,reliable and less complicated.
four. Double motion clutch with disc spring, perform steadily and straightforward to run.
5. Completely hydraulic steering technique tremendously decreased driver’s operate strength.
six. Moist disc brake device, reputable brake overall performance.
7. Separate injection of hydraulic oil, reliable to function.
8. The lifter with pressure and situation adjustment, with dependable carry.
9. Tractor PTO:
PTO in Double speed : 540/760r/min Optional, For high doing work effectiveness.
PTO shaft of 6 or 8 spline Optional, adaptable for agricultural products of all in excess of the entire world.
10. Huge Chassis and Large-responsibility Rear axle for Resilient Sturdy device.
eleven. Total sequence light, ROPS,Sunshade/Canopy, Fan/Heater/Air-conditioned cabin are all accessible, for far more comfy driving environment.
Tractor Primary specificaiton and Technical parameters:
DQ1204 120HP 4W D Tractor detai EPT display :
DQ1204 120HP 4 wheel drive have A variety of Optional configurations and hues for pick:
EPT Manufacutring Line:
Strictly Inspecting and Total Tests for making sure higher high quality merchandise:
Tractor Packing and Loading container for Delivering merchandise :
Make sure you contact us if you have any desire for our merchandise :
Best value will be quoted for you as before long as acquire your Necessity !